new file mode 100644
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sama5d2-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel I2S controller
+
+maintainers:
+ - Nicolas Ferre <nicolas.ferre@microchip.com>
+ - Alexandre Belloni <alexandre.belloni@bootlin.com>
+ - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+ Atmel I2S (Inter-IC Sound Controller) bus is the standard
+ interface for connecting audio devices, such as audio codecs.
+
+properties:
+ compatible:
+ const: atmel,sama5d2-i2s
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description:
+ Only the peripheral clock (pclk) is required. The generated clock (gclk)
+ and the I2S mux clock (muxclk) are optional and should only be set together,
+ when Master Mode is required.
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: gclk
+ - const: muxclk
+ minItems: 1
+
+ dmas:
+ description:
+ Should be one per channel name listed in the dma-names property.
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - dmas
+ - dma-names
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/dma/at91.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ i2s@f8050000 {
+ compatible = "atmel,sama5d2-i2s";
+ reg = <0xf8050000 0x300>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(31))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(32))>;
+ dma-names = "tx", "rx";
+ clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>;
+ clock-names = "pclk", "gclk", "muxclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s0_default>;
+ };
deleted file mode 100644
@@ -1,46 +0,0 @@
-* Atmel I2S controller
-
-Required properties:
-- compatible: Should be "atmel,sama5d2-i2s".
-- reg: Should be the physical base address of the controller and the
- length of memory mapped region.
-- interrupts: Should contain the interrupt for the controller.
-- dmas: Should be one per channel name listed in the dma-names property,
- as described in atmel-dma.txt and dma.txt files.
-- dma-names: Two dmas have to be defined, "tx" and "rx".
- This IP also supports one shared channel for both rx and tx;
- if this mode is used, one "rx-tx" name must be used.
-- clocks: Must contain an entry for each entry in clock-names.
- Please refer to clock-bindings.txt.
-- clock-names: Should be one of each entry matching the clocks phandles list:
- - "pclk" (peripheral clock) Required.
- - "gclk" (generated clock) Optional (1).
- - "muxclk" (I2S mux clock) Optional (1).
-
-Optional properties:
-- pinctrl-0: Should specify pin control groups used for this controller.
-- princtrl-names: Should contain only one value - "default".
-
-
-(1) : Only the peripheral clock is required. The generated clock and the I2S
- mux clock are optional and should only be set together, when Master Mode
- is required.
-
-Example:
-
- i2s@f8050000 {
- compatible = "atmel,sama5d2-i2s";
- reg = <0xf8050000 0x300>;
- interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
- dmas = <&dma0
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
- AT91_XDMAC_DT_PERID(31))>,
- <&dma0
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
- AT91_XDMAC_DT_PERID(32))>;
- dma-names = "tx", "rx";
- clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>;
- clock-names = "pclk", "gclk", "muxclk";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2s0_default>;
- };