| Message ID | 20220722152945.2950807-1-Ryan.Wanner@microchip.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 6f78675445ca243229303cd72898c4a2b95a2bc0 |
| Headers | show |
| Series | [v2] ASoC: dt-bindings: atmel-i2s: Convert to json-schema | expand |
On 22/07/2022 17:29, Ryan.Wanner@microchip.com wrote: > From: Ryan Wanner <Ryan.Wanner@microchip.com> > > Convert atmel i2s devicetree binding to json-schema. > Change file name to match json-schema naming. > > Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> > --- > Note: running dtbs_check will fail unless updated with this patch, > https://lore.kernel.org/linux-arm-kernel/20220707215812.193008-1-Ryan.Wanner@microchip.com/ > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Fri, 22 Jul 2022 08:29:45 -0700, Ryan.Wanner@microchip.com wrote: > From: Ryan Wanner <Ryan.Wanner@microchip.com> > > Convert atmel i2s devicetree binding to json-schema. > Change file name to match json-schema naming. > > Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/1] ASoC: dt-bindings: atmel-i2s: Convert to json-schema commit: 6f78675445ca243229303cd72898c4a2b95a2bc0 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
On Fri, 22 Jul 2022 08:29:45 -0700, Ryan.Wanner@microchip.com wrote: > From: Ryan Wanner <Ryan.Wanner@microchip.com> > > Convert atmel i2s devicetree binding to json-schema. > Change file name to match json-schema naming. > > Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> > --- > Note: running dtbs_check will fail unless updated with this patch, > https://lore.kernel.org/linux-arm-kernel/20220707215812.193008-1-Ryan.Wanner@microchip.com/ > > v1 -> v2: > - Fix formatting for clock description. > - Fix formatting for dma description. > > .../bindings/sound/atmel,sama5d2-i2s.yaml | 85 +++++++++++++++++++ > .../devicetree/bindings/sound/atmel-i2s.txt | 46 ---------- > 2 files changed, 85 insertions(+), 46 deletions(-) > create mode 100644 Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml > delete mode 100644 Documentation/devicetree/bindings/sound/atmel-i2s.txt > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/patch/ i2s@fc04c000: 'assigned-parrents' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/at91-kizbox3-hs.dtb arch/arm/boot/dts/at91-sama5d27_som1_ek.dtb arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dtb arch/arm/boot/dts/at91-sama5d2_icp.dtb arch/arm/boot/dts/at91-sama5d2_ptc_ek.dtb arch/arm/boot/dts/at91-sama5d2_xplained.dtb
diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml new file mode 100644 index 000000000000..0cd1ff89baed --- /dev/null +++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/atmel,sama5d2-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel I2S controller + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Claudiu Beznea <claudiu.beznea@microchip.com> + +description: + Atmel I2S (Inter-IC Sound Controller) bus is the standard + interface for connecting audio devices, such as audio codecs. + +properties: + compatible: + const: atmel,sama5d2-i2s + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Peripheral clock + - description: Generated clock (Optional) + - description: I2S mux clock (Optional). Set + with gclk when Master Mode is required. + minItems: 1 + + clock-names: + items: + - const: pclk + - const: gclk + - const: muxclk + minItems: 1 + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + +required: + - compatible + - reg + - interrupts + - dmas + - dma-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2s@f8050000 { + compatible = "atmel,sama5d2-i2s"; + reg = <0xf8050000 0x300>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(31))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(32))>; + dma-names = "tx", "rx"; + clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>; + clock-names = "pclk", "gclk", "muxclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s0_default>; + }; diff --git a/Documentation/devicetree/bindings/sound/atmel-i2s.txt b/Documentation/devicetree/bindings/sound/atmel-i2s.txt deleted file mode 100644 index 40549f496a81..000000000000 --- a/Documentation/devicetree/bindings/sound/atmel-i2s.txt +++ /dev/null @@ -1,46 +0,0 @@ -* Atmel I2S controller - -Required properties: -- compatible: Should be "atmel,sama5d2-i2s". -- reg: Should be the physical base address of the controller and the - length of memory mapped region. -- interrupts: Should contain the interrupt for the controller. -- dmas: Should be one per channel name listed in the dma-names property, - as described in atmel-dma.txt and dma.txt files. -- dma-names: Two dmas have to be defined, "tx" and "rx". - This IP also supports one shared channel for both rx and tx; - if this mode is used, one "rx-tx" name must be used. -- clocks: Must contain an entry for each entry in clock-names. - Please refer to clock-bindings.txt. -- clock-names: Should be one of each entry matching the clocks phandles list: - - "pclk" (peripheral clock) Required. - - "gclk" (generated clock) Optional (1). - - "muxclk" (I2S mux clock) Optional (1). - -Optional properties: -- pinctrl-0: Should specify pin control groups used for this controller. -- princtrl-names: Should contain only one value - "default". - - -(1) : Only the peripheral clock is required. The generated clock and the I2S - mux clock are optional and should only be set together, when Master Mode - is required. - -Example: - - i2s@f8050000 { - compatible = "atmel,sama5d2-i2s"; - reg = <0xf8050000 0x300>; - interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(31))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(32))>; - dma-names = "tx", "rx"; - clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>; - clock-names = "pclk", "gclk", "muxclk"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2s0_default>; - };