| Message ID | 20220802214811.29033-1-j-luthra@ti.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | dt-bindings: sound: tlv320aic3x: Convert to dtschema | expand |
On Tue, 02 Aug 2022 16:48:11 -0500, Jai Luthra wrote: > Convert bindings for TI's TLV320AIC3x audio codecs to dtschema. > > Signed-off-by: Jai Luthra <j-luthra@ti.com> > --- > .../devicetree/bindings/sound/tlv320aic3x.txt | 97 ------------ > .../bindings/sound/tlv320aic3x.yaml | 145 ++++++++++++++++++ > 2 files changed, 145 insertions(+), 97 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/sound/tlv320aic3x.txt > create mode 100644 Documentation/devicetree/bindings/sound/tlv320aic3x.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml: properties:ai3x-gpio-func:maxItems: False schema does not allow 3 hint: Scalar properties should not have array keywords from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml: properties:ai3x-gpio-func:minItems: False schema does not allow 3 hint: Scalar properties should not have array keywords from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml: ignoring, error in schema: properties: ai3x-gpio-func: maxItems Documentation/devicetree/bindings/sound/tlv320aic3x.example.dtb:0:0: /example-0/i2c/tlv320aic3x@1b: failed to match any schema with compatible: ['ti,tlv320aic3x'] Documentation/devicetree/bindings/sound/tlv320aic3x.example.dtb:0:0: /example-1/spi/codec@0: failed to match any schema with compatible: ['ti,tlv320aic3x'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On 02/08/2022 23:48, Jai Luthra wrote: > Convert bindings for TI's TLV320AIC3x audio codecs to dtschema. > > Signed-off-by: Jai Luthra <j-luthra@ti.com> > --- Thank you for your patch. There is something to discuss/improve. > diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml b/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml > new file mode 100644 > index 000000000000..6efb1d459543 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml > @@ -0,0 +1,145 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/tlv320aic3x.yaml# Filename with vendor prefix, so ti,tlv320aic3x.yaml > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Texas Instruments TLV320AIC3x Codec Device Tree Bindings s/Device Tree Bindings// > + > +maintainers: > + - Jai Luthra <j-luthra@ti.com> > + > +properties: > + compatible: > + enum: > + - ti,tlv320aic3x > + - ti,tlv320aic33 > + - ti,tlv320aic3007 > + - ti,tlv320aic3106 > + - ti,tlv320aic3104 > + > + reg: > + maxItems: 1 > + description: i2c slave address Skip description. > + > + reset-gpios: > + maxItems: 1 > + description: > + GPIO specification for the active low RESET input. > + > + ai3x-gpio-func: > + description: AIC3X_GPIO1 & AIC3X_GPIO2 Functionality > + $ref: /schemas/types.yaml#/definitions/uint32 > + minItems: 3 uint32-array. Old bindings say about two items only. Mention any changes to binding in cover letter. > + maxItems: 3 > + You lost gpio-reset property. Also not explained in commit msg. > + ai3x-micbias-vg: > + description: MicBias required voltage. If node is omitted then MicBias is powered down. > + $ref: /schemas/types.yaml#/definitions/uint32 > + oneOf: > + - const: 1 > + description: MICBIAS output is powered to 2.0V. > + - const: 2 > + description: MICBIAS output is powered to 2.5V. > + - const: 3 > + description: MICBIAS output is connected to AVDD. > + > + ai3x-ocmv: > + description: Output Common-Mode Voltage selection. > + $ref: /schemas/types.yaml#/definitions/uint32 > + oneOf: > + - const: 0 > + description: 1.35V > + - const: 1 > + description: 1.5V > + - const: 2 > + description: 1.65V > + - const: 3 > + description: 1.8V > + > + AVDD-supply: > + description: Analog DAC voltage. New properties? > + > + IOVDD-supply: > + description: I/O voltage. > + > + DRVDD-supply: > + description: ADC analog and output driver voltage. > + > + DVDD-supply: > + description: Digital core voltage. > + > + '#sound-dai-cells': > + const: 0 > + > +required: > + - compatible > + - reg > + > +#The pins can be used in referring sound node's audio-routing property. > + > +#CODEC output pins: > + # LLOUT > + # RLOUT > + # MONO_LOUT > + # HPLOUT > + # HPROUT > + # HPLCOM > + # HPRCOM > + > +#CODEC input pins for TLV320AIC3104: > + # MIC2L > + # MIC2R > + # LINE1L > + # LINE1R > + > +#CODEC input pins for other compatible codecs: > + # MIC3L > + # MIC3R > + # LINE1L > + # LINE2L > + # LINE1R > + # LINE2R All this goes to top level description. Best regards, Krzysztof
Hi Krzysztof, Thanks for the review. On 08:29-20220803, Krzysztof Kozlowski wrote: > On 02/08/2022 23:48, Jai Luthra wrote: > > Convert bindings for TI's TLV320AIC3x audio codecs to dtschema. > > > > Signed-off-by: Jai Luthra <j-luthra@ti.com> > > --- > > > Thank you for your patch. There is something to discuss/improve. > > > diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml b/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml > > new file mode 100644 > > index 000000000000..6efb1d459543 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml > > @@ -0,0 +1,145 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/sound/tlv320aic3x.yaml# > > Filename with vendor prefix, so ti,tlv320aic3x.yaml > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Texas Instruments TLV320AIC3x Codec Device Tree Bindings > > s/Device Tree Bindings// > > > + > > +maintainers: > > + - Jai Luthra <j-luthra@ti.com> > > + > > +properties: > > + compatible: > > + enum: > > + - ti,tlv320aic3x > > + - ti,tlv320aic33 > > + - ti,tlv320aic3007 > > + - ti,tlv320aic3106 > > + - ti,tlv320aic3104 > > + > > + reg: > > + maxItems: 1 > > + description: i2c slave address > > Skip description. > > > + > > + reset-gpios: > > + maxItems: 1 > > + description: > > + GPIO specification for the active low RESET input. > > + > > + ai3x-gpio-func: > > + description: AIC3X_GPIO1 & AIC3X_GPIO2 Functionality > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + minItems: 3 > > uint32-array. Old bindings say about two items only. Mention any changes > to binding in cover letter. My bad, that should still be 2 items. > > > + maxItems: 3 > > + > > You lost gpio-reset property. Also not explained in commit msg. > > > + ai3x-micbias-vg: > > + description: MicBias required voltage. If node is omitted then MicBias is powered down. > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + oneOf: > > + - const: 1 > > + description: MICBIAS output is powered to 2.0V. > > + - const: 2 > > + description: MICBIAS output is powered to 2.5V. > > + - const: 3 > > + description: MICBIAS output is connected to AVDD. > > + > > + ai3x-ocmv: > > + description: Output Common-Mode Voltage selection. > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + oneOf: > > + - const: 0 > > + description: 1.35V > > + - const: 1 > > + description: 1.5V > > + - const: 2 > > + description: 1.65V > > + - const: 3 > > + description: 1.8V > > + > > + AVDD-supply: > > + description: Analog DAC voltage. > > New properties? > These regulator properties were mentioned in the txt as well. > > + > > + IOVDD-supply: > > + description: I/O voltage. > > + > > + DRVDD-supply: > > + description: ADC analog and output driver voltage. > > + > > + DVDD-supply: > > + description: Digital core voltage. > > + > > + '#sound-dai-cells': > > + const: 0 > > + > > +required: > > + - compatible > > + - reg > > + > > +#The pins can be used in referring sound node's audio-routing property. > > + > > +#CODEC output pins: > > + # LLOUT > > + # RLOUT > > + # MONO_LOUT > > + # HPLOUT > > + # HPROUT > > + # HPLCOM > > + # HPRCOM > > + > > +#CODEC input pins for TLV320AIC3104: > > + # MIC2L > > + # MIC2R > > + # LINE1L > > + # LINE1R > > + > > +#CODEC input pins for other compatible codecs: > > + # MIC3L > > + # MIC3R > > + # LINE1L > > + # LINE2L > > + # LINE1R > > + # LINE2R > > All this goes to top level description. > > > Best regards, > Krzysztof Fixed rest of the comments in v2. Thanks, Jai
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt deleted file mode 100644 index 20931a63fd64..000000000000 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ /dev/null @@ -1,97 +0,0 @@ -Texas Instruments - tlv320aic3x Codec module - -The tlv320aic3x serial control bus communicates through both I2C and SPI bus protocols - -Required properties: - -- compatible - "string" - One of: - "ti,tlv320aic3x" - Generic TLV320AIC3x device - "ti,tlv320aic33" - TLV320AIC33 - "ti,tlv320aic3007" - TLV320AIC3007 - "ti,tlv320aic3106" - TLV320AIC3106 - "ti,tlv320aic3104" - TLV320AIC3104 - - -- reg - <int> - I2C slave address - - -Optional properties: - -- reset-gpios - GPIO specification for the active low RESET input. -- ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality - - Not supported on tlv320aic3104 -- ai3x-micbias-vg - MicBias Voltage required. - 1 - MICBIAS output is powered to 2.0V, - 2 - MICBIAS output is powered to 2.5V, - 3 - MICBIAS output is connected to AVDD, - If this node is not mentioned or if the value is incorrect, then MicBias - is powered down. -- ai3x-ocmv - Output Common-Mode Voltage selection: - 0 - 1.35V, - 1 - 1.5V, - 2 - 1.65V, - 3 - 1.8V -- AVDD-supply, IOVDD-supply, DRVDD-supply, DVDD-supply : power supplies for the - device as covered in Documentation/devicetree/bindings/regulator/regulator.txt - -Deprecated properties: - -- gpio-reset - gpio pin number used for codec reset - -CODEC output pins: - * LLOUT - * RLOUT - * MONO_LOUT - * HPLOUT - * HPROUT - * HPLCOM - * HPRCOM - -CODEC input pins for TLV320AIC3104: - * MIC2L - * MIC2R - * LINE1L - * LINE1R - -CODEC input pins for other compatible codecs: - * MIC3L - * MIC3R - * LINE1L - * LINE2L - * LINE1R - * LINE2R - -The pins can be used in referring sound node's audio-routing property. - -I2C example: - -#include <dt-bindings/gpio/gpio.h> - -tlv320aic3x: tlv320aic3x@1b { - compatible = "ti,tlv320aic3x"; - reg = <0x1b>; - - reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - - AVDD-supply = <®ulator>; - IOVDD-supply = <®ulator>; - DRVDD-supply = <®ulator>; - DVDD-supply = <®ulator>; -}; - -SPI example: - -spi0: spi@f0000000 { - tlv320aic3x: codec@0 { - compatible = "ti,tlv320aic3x"; - reg = <0>; /* CS number */ - #sound-dai-cells = <0>; - spi-max-frequency = <1000000>; - - AVDD-supply = <®ulator>; - IOVDD-supply = <®ulator>; - DRVDD-supply = <®ulator>; - DVDD-supply = <®ulator>; - ai3x-ocmv = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml b/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml new file mode 100644 index 000000000000..6efb1d459543 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/tlv320aic3x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320AIC3x Codec Device Tree Bindings + +maintainers: + - Jai Luthra <j-luthra@ti.com> + +properties: + compatible: + enum: + - ti,tlv320aic3x + - ti,tlv320aic33 + - ti,tlv320aic3007 + - ti,tlv320aic3106 + - ti,tlv320aic3104 + + reg: + maxItems: 1 + description: i2c slave address + + reset-gpios: + maxItems: 1 + description: + GPIO specification for the active low RESET input. + + ai3x-gpio-func: + description: AIC3X_GPIO1 & AIC3X_GPIO2 Functionality + $ref: /schemas/types.yaml#/definitions/uint32 + minItems: 3 + maxItems: 3 + + ai3x-micbias-vg: + description: MicBias required voltage. If node is omitted then MicBias is powered down. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - const: 1 + description: MICBIAS output is powered to 2.0V. + - const: 2 + description: MICBIAS output is powered to 2.5V. + - const: 3 + description: MICBIAS output is connected to AVDD. + + ai3x-ocmv: + description: Output Common-Mode Voltage selection. + $ref: /schemas/types.yaml#/definitions/uint32 + oneOf: + - const: 0 + description: 1.35V + - const: 1 + description: 1.5V + - const: 2 + description: 1.65V + - const: 3 + description: 1.8V + + AVDD-supply: + description: Analog DAC voltage. + + IOVDD-supply: + description: I/O voltage. + + DRVDD-supply: + description: ADC analog and output driver voltage. + + DVDD-supply: + description: Digital core voltage. + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +#The pins can be used in referring sound node's audio-routing property. + +#CODEC output pins: + # LLOUT + # RLOUT + # MONO_LOUT + # HPLOUT + # HPROUT + # HPLCOM + # HPRCOM + +#CODEC input pins for TLV320AIC3104: + # MIC2L + # MIC2R + # LINE1L + # LINE1R + +#CODEC input pins for other compatible codecs: + # MIC3L + # MIC3R + # LINE1L + # LINE2L + # LINE1R + # LINE2R + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tlv320aic3x_i2c: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; + + reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + + AVDD-supply = <®ulator>; + IOVDD-supply = <®ulator>; + DRVDD-supply = <®ulator>; + DVDD-supply = <®ulator>; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + tlv320aic3x_spi: codec@0 { + compatible = "ti,tlv320aic3x"; + reg = <0>; /* CS number */ + #sound-dai-cells = <0>; + + AVDD-supply = <®ulator>; + IOVDD-supply = <®ulator>; + DRVDD-supply = <®ulator>; + DVDD-supply = <®ulator>; + ai3x-ocmv = <0>; + }; + }; + +...
Convert bindings for TI's TLV320AIC3x audio codecs to dtschema. Signed-off-by: Jai Luthra <j-luthra@ti.com> --- .../devicetree/bindings/sound/tlv320aic3x.txt | 97 ------------ .../bindings/sound/tlv320aic3x.yaml | 145 ++++++++++++++++++ 2 files changed, 145 insertions(+), 97 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/tlv320aic3x.txt create mode 100644 Documentation/devicetree/bindings/sound/tlv320aic3x.yaml