@@ -1156,7 +1156,8 @@ static int cs35l41_no_acpi_dsd(struct cs35l41_hda *cs35l41, struct device *physd
hw_cfg->valid = true;
put_device(physdev);
- if (strncmp(hid, "CLSA0100", 8) == 0) {
+ if ((strncmp(hid, "CLSA0100", 8) == 0) ||
+ (strncmp(hid, "CSC3551", 7) == 0)) {
hw_cfg->bst_type = CS35L41_EXT_BOOST_NO_VSPK_SWITCH;
} else if (strncmp(hid, "CLSA0101", 8) == 0) {
hw_cfg->bst_type = CS35L41_EXT_BOOST;
@@ -9179,6 +9179,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x83b9, "HP Spectre x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
SND_PCI_QUIRK(0x103c, 0x841c, "HP Pavilion 15-CK0xx", ALC269_FIXUP_HP_MUTE_LED_MIC3),
SND_PCI_QUIRK(0x103c, 0x8497, "HP Envy x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
+ SND_PCI_QUIRK(0x103c, 0x8a31, "HP ENVY x360 2-in-1 Laptop 15-ey0xxx", ALC287_FIXUP_CS35L41_I2C_2),
SND_PCI_QUIRK(0x103c, 0x84da, "HP OMEN dc0019-ur", ALC295_FIXUP_HP_OMEN),
SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),
SND_PCI_QUIRK(0x103c, 0x8519, "HP Spectre x360 15-df0xxx", ALC285_FIXUP_HP_SPECTRE_X360),
This patch fixes speaker output on the HP Envy x360 ey0xxx The mic/speaker mute LEDs are still non-functional but they aren't required for basic funtionality Also the quirk is labeled ALC287_FIXUP_CS35L41_I2C_2 however it does not only apply to ALC287 Its function is the generic cs35l41 fixup telling the driver that there's 2 i2c speakers. It isn't actually specific to ALC287 I did have a bit of luck getting the mic mute LED to work but it was to finicky to submit ( I used the ALC245_FIXUP_HP_GPIO_LED quirk ) I had no luck getting the speaker mute LED to work Signed-off-by: Fae <faenkhauser@gmail.com> --- sound/pci/hda/cs35l41_hda.c | 3 ++- sound/pci/hda/patch_realtek.c | 1 + 2 files changed, 3 insertions(+), 1 deletion(-)