| Message ID | 20221026110210.6575-7-srinivas.kandagatla@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | soundwire: qcom: fixes and support for v1.7 | expand |
> @@ -1582,6 +1597,7 @@ static const struct of_device_id qcom_swrm_of_match[] = { > { .compatible = "qcom,soundwire-v1.3.0", .data = &swrm_v1_3_data }, > { .compatible = "qcom,soundwire-v1.5.1", .data = &swrm_v1_5_data }, > { .compatible = "qcom,soundwire-v1.6.0", .data = &swrm_v1_6_data }, > + { .compatible = "qcom,soundwire-v1.7.0", .data = &swrm_v1_5_data }, is this line intentional, it looks odd that 1.7 is compatible with 1.5, but 1.6 isn't?
Hi Pierre, On 26/10/2022 21:14, Pierre-Louis Bossart wrote: > >> @@ -1582,6 +1597,7 @@ static const struct of_device_id qcom_swrm_of_match[] = { >> { .compatible = "qcom,soundwire-v1.3.0", .data = &swrm_v1_3_data }, >> { .compatible = "qcom,soundwire-v1.5.1", .data = &swrm_v1_5_data }, >> { .compatible = "qcom,soundwire-v1.6.0", .data = &swrm_v1_6_data }, >> + { .compatible = "qcom,soundwire-v1.7.0", .data = &swrm_v1_5_data }, > > is this line intentional, it looks odd that 1.7 is compatible with 1.5, > but 1.6 isn't? This is more around the data rather than compatible, 1.6 data is marked with sw_clk_gate_required = true which is not the case with 1.7. from 1.5 we use same frame shape info for 1.6, 1.7, except that 1.6 had this sw_clk_gate_required flag set. --srini >
>>> @@ -1582,6 +1597,7 @@ static const struct of_device_id >>> qcom_swrm_of_match[] = { >>> { .compatible = "qcom,soundwire-v1.3.0", .data = >>> &swrm_v1_3_data }, >>> { .compatible = "qcom,soundwire-v1.5.1", .data = >>> &swrm_v1_5_data }, >>> { .compatible = "qcom,soundwire-v1.6.0", .data = >>> &swrm_v1_6_data }, >>> + { .compatible = "qcom,soundwire-v1.7.0", .data = &swrm_v1_5_data }, >> >> is this line intentional, it looks odd that 1.7 is compatible with 1.5, >> but 1.6 isn't? > This is more around the data rather than compatible, 1.6 data is marked > with sw_clk_gate_required = true which is not the case with 1.7. > > from 1.5 we use same frame shape info for 1.6, 1.7, except that 1.6 had > this sw_clk_gate_required flag set. probably worthy of a comment to show intent and explain the differences?
diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index 54d370f4b291..335424870290 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -25,6 +25,8 @@ #define SWRM_COMP_SW_RESET 0x008 #define SWRM_COMP_STATUS 0x014 +#define SWRM_LINK_MANAGER_EE 0x018 +#define SWRM_EE_CPU 1 #define SWRM_FRM_GEN_ENABLED BIT(0) #define SWRM_COMP_HW_VERSION 0x00 #define SWRM_COMP_CFG_ADDR 0x04 @@ -693,7 +695,14 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) u32p_replace_bits(&val, SWRM_DEF_CMD_NO_PINGS, SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK); ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val); - ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START); + if (ctrl->version >= 0x01070000) { + ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU); + ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, + SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU); + } else { + ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START); + } + /* Configure number of retries of a read/write cmd */ if (ctrl->version > 0x01050001) { /* Only for versions >= 1.5.1 */ @@ -1518,7 +1527,13 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev) } else { reset_control_reset(ctrl->audio_cgcr); - ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START); + if (ctrl->version >= 0x01070000) { + ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU); + ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, + SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU); + } else { + ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START); + } ctrl->reg_write(ctrl, SWRM_INTERRUPT_CLEAR, SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET); @@ -1582,6 +1597,7 @@ static const struct of_device_id qcom_swrm_of_match[] = { { .compatible = "qcom,soundwire-v1.3.0", .data = &swrm_v1_3_data }, { .compatible = "qcom,soundwire-v1.5.1", .data = &swrm_v1_5_data }, { .compatible = "qcom,soundwire-v1.6.0", .data = &swrm_v1_6_data }, + { .compatible = "qcom,soundwire-v1.7.0", .data = &swrm_v1_5_data }, {/* sentinel */}, };
This patch add support for v1.7 SoundWire Controller which has support for Multi-EE (Execution Environment), resulting in a new register and extending field in BUS_CTRL register. With these updates v1.7.0 is fully supported. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- drivers/soundwire/qcom.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)