@@ -206,10 +206,10 @@ static const struct snd_kcontrol_new adau1372_controls[] = {
2, 1, 0, adau1372_pga_boost_tlv),
SOC_SINGLE_TLV("PGA 3 Boost Capture Volume", ADAU1372_REG_PGA_BOOST,
3, 1, 0, adau1372_pga_boost_tlv),
- SOC_SINGLE("PGA 0 Capture Switch", ADAU1372_REG_PGA_CTRL(0), 7, 1, 1),
- SOC_SINGLE("PGA 1 Capture Switch", ADAU1372_REG_PGA_CTRL(1), 7, 1, 1),
- SOC_SINGLE("PGA 2 Capture Switch", ADAU1372_REG_PGA_CTRL(2), 7, 1, 1),
- SOC_SINGLE("PGA 3 Capture Switch", ADAU1372_REG_PGA_CTRL(3), 7, 1, 1),
+ SOC_SINGLE("PGA 0 Capture Switch", ADAU1372_REG_PGA_CTRL(0), 7, 1, 0),
+ SOC_SINGLE("PGA 1 Capture Switch", ADAU1372_REG_PGA_CTRL(1), 7, 1, 0),
+ SOC_SINGLE("PGA 2 Capture Switch", ADAU1372_REG_PGA_CTRL(2), 7, 1, 0),
+ SOC_SINGLE("PGA 3 Capture Switch", ADAU1372_REG_PGA_CTRL(3), 7, 1, 0),
SOC_SINGLE_TLV("DAC 0 Playback Volume", ADAU1372_REG_DAC_VOL(0),
0, 0xff, 1, adau1372_digital_tlv),
@@ -369,10 +369,10 @@ static const struct snd_soc_dapm_widget adau1372_dapm_widgets[] = {
SND_SOC_DAPM_SUPPLY("MICBIAS0", ADAU1372_REG_MICBIAS, 4, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("MICBIAS1", ADAU1372_REG_MICBIAS, 5, 0, NULL, 0),
- SND_SOC_DAPM_PGA("PGA0", ADAU1372_REG_PGA_CTRL(0), 6, 0, NULL, 0),
- SND_SOC_DAPM_PGA("PGA1", ADAU1372_REG_PGA_CTRL(1), 6, 0, NULL, 0),
- SND_SOC_DAPM_PGA("PGA2", ADAU1372_REG_PGA_CTRL(2), 6, 0, NULL, 0),
- SND_SOC_DAPM_PGA("PGA3", ADAU1372_REG_PGA_CTRL(3), 6, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("PGA0", ADAU1372_REG_PGA_CTRL(0), 6, 1, NULL, 0),
+ SND_SOC_DAPM_PGA("PGA1", ADAU1372_REG_PGA_CTRL(1), 6, 1, NULL, 0),
+ SND_SOC_DAPM_PGA("PGA2", ADAU1372_REG_PGA_CTRL(2), 6, 1, NULL, 0),
+ SND_SOC_DAPM_PGA("PGA3", ADAU1372_REG_PGA_CTRL(3), 6, 1, NULL, 0),
SND_SOC_DAPM_ADC("ADC0", NULL, ADAU1372_REG_ADC_CTRL2, 0, 0),
SND_SOC_DAPM_ADC("ADC1", NULL, ADAU1372_REG_ADC_CTRL2, 1, 0),
SND_SOC_DAPM_ADC("ADC2", NULL, ADAU1372_REG_ADC_CTRL3, 0, 0),
The DAPM control for PGAx uses the PGA mute bit for power management. This bit is active high but is set to non-inverted (ie when powering, it will mute). The ALSA control "PGA x Capture Switch" uses the active high PGA_ENx bit, but is set to inverted. So when enabling this switch, the PGA gets disabled. To correct the behaviour, invert both these bits. Signed-off-by: Maarten Zanders <maarten.zanders@mind.be> --- sound/soc/codecs/adau1372.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)