From patchwork Fri Nov 11 01:31:34 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bard Liao X-Patchwork-Id: 13039490 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id B3C7EC433FE for ; Fri, 11 Nov 2022 01:32:56 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id D7D2B1674; Fri, 11 Nov 2022 02:32:04 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz D7D2B1674 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1668130374; bh=1K171+GuLTJ4GyHu3bemwaBkNeNhXW7lLDgjVRwStEk=; h=From:To:Subject:Date:In-Reply-To:References:Cc:List-Id: List-Unsubscribe:List-Archive:List-Post:List-Help:List-Subscribe: From; b=Uo3d/djZASScjiiszwxferM4qgG9OlGaf06DCbzv/4yUrm/LYI8pZxemDHdGAkC0i AtfzhKdLeMSGY9TIBOIoWpUPtms27dunQY9n2sfOtHg2MiHSJgfPdyx7etLnpwPtkS 4OcUt2K0MNw+mfm/j0ff+b99F7uZXA4hp8lQICiw= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id 37BB7F805A0; Fri, 11 Nov 2022 02:30:12 +0100 (CET) Received: by alsa1.perex.cz (Postfix, from userid 50401) id CB569F8057E; Fri, 11 Nov 2022 02:30:09 +0100 (CET) Received: from mga05.intel.com (mga05.intel.com [192.55.52.43]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id ECC41F80566 for ; Fri, 11 Nov 2022 02:30:02 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz ECC41F80566 Authentication-Results: alsa1.perex.cz; dkim=pass (2048-bit key) header.d=intel.com header.i=@intel.com header.b="YjVdi+9V" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1668130204; x=1699666204; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=1K171+GuLTJ4GyHu3bemwaBkNeNhXW7lLDgjVRwStEk=; b=YjVdi+9VeZnNnO+xj+6Y1AaaPfO/jLBWHfWYmc1AkQMTlwUerxBiaf7w WR2/NPMWJIIzFwQvnnyS69VpUaowAjfBkARZmo3o1ZZN+ZaniaVCdDeph VoxHyaj9A8t4YVhyp7LGRqf35drV66MXtrdC6Do5+hxzKfC8R+FIaEsqk ZdCym2TpvBUq54eK5QfnWYuJzhAeMZebYHH6yLPVDCvToKxIUUMkGL4de ILCV/LYAnq12rSulKuU7F0UL1nAmkuyb28EkGvCj90aPWcJoiV7rmizqD Jbe3vKcEKtmAeHVyeqrLcsoZ8NIEb1QeV/I5b50IbBJIn8PU+6BU+vv68 w==; X-IronPort-AV: E=McAfee;i="6500,9779,10527"; a="397789752" X-IronPort-AV: E=Sophos;i="5.96,155,1665471600"; d="scan'208";a="397789752" Received: from fmsmga001.fm.intel.com ([10.253.24.23]) by fmsmga105.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 10 Nov 2022 17:30:01 -0800 X-IronPort-AV: E=McAfee;i="6500,9779,10527"; a="780003281" X-IronPort-AV: E=Sophos;i="5.96,155,1665471600"; d="scan'208";a="780003281" Received: from bard-ubuntu.sh.intel.com ([10.239.185.57]) by fmsmga001-auth.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 10 Nov 2022 17:29:58 -0800 From: Bard Liao To: alsa-devel@alsa-project.org, vkoul@kernel.org Subject: [PATCH 7/7] soundwire: intel: split auxdevice to different file Date: Fri, 11 Nov 2022 09:31:34 +0800 Message-Id: <20221111013135.38289-8-yung-chuan.liao@linux.intel.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221111013135.38289-1-yung-chuan.liao@linux.intel.com> References: <20221111013135.38289-1-yung-chuan.liao@linux.intel.com> MIME-Version: 1.0 Cc: pierre-louis.bossart@linux.intel.com, vinod.koul@linaro.org, bard.liao@intel.com, linux-kernel@vger.kernel.org X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" From: Pierre-Louis Bossart The auxdevice layer is completely generic, it should be split from intel.c which is only geared to the 'cnl' hw_ops now. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Signed-off-by: Bard Liao --- drivers/soundwire/Makefile | 2 +- drivers/soundwire/intel.c | 657 --------------------------- drivers/soundwire/intel.h | 11 +- drivers/soundwire/intel_auxdevice.c | 678 ++++++++++++++++++++++++++++ drivers/soundwire/intel_auxdevice.h | 18 + drivers/soundwire/intel_init.c | 1 + 6 files changed, 700 insertions(+), 667 deletions(-) create mode 100644 drivers/soundwire/intel_auxdevice.c create mode 100644 drivers/soundwire/intel_auxdevice.h diff --git a/drivers/soundwire/Makefile b/drivers/soundwire/Makefile index 986776787b9e..ca97414ada70 100644 --- a/drivers/soundwire/Makefile +++ b/drivers/soundwire/Makefile @@ -20,7 +20,7 @@ soundwire-cadence-y := cadence_master.o obj-$(CONFIG_SOUNDWIRE_CADENCE) += soundwire-cadence.o #Intel driver -soundwire-intel-y := intel.o intel_init.o dmi-quirks.o +soundwire-intel-y := intel.o intel_auxdevice.o intel_init.o dmi-quirks.o obj-$(CONFIG_SOUNDWIRE_INTEL) += soundwire-intel.o #Qualcomm driver diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c index ea6479b4010d..bc9c50bacc49 100644 --- a/drivers/soundwire/intel.c +++ b/drivers/soundwire/intel.c @@ -8,10 +8,7 @@ #include #include #include -#include -#include #include -#include #include #include #include @@ -22,27 +19,6 @@ #include "bus.h" #include "intel.h" -/* IDA min selected to avoid conflicts with HDaudio/iDISP SDI values */ -#define INTEL_DEV_NUM_IDA_MIN 4 - -#define INTEL_MASTER_SUSPEND_DELAY_MS 3000 -#define INTEL_MASTER_RESET_ITERATIONS 10 - -/* - * debug/config flags for the Intel SoundWire Master. - * - * Since we may have multiple masters active, we can have up to 8 - * flags reused in each byte, with master0 using the ls-byte, etc. - */ - -#define SDW_INTEL_MASTER_DISABLE_PM_RUNTIME BIT(0) -#define SDW_INTEL_MASTER_DISABLE_CLOCK_STOP BIT(1) -#define SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE BIT(2) -#define SDW_INTEL_MASTER_DISABLE_MULTI_LINK BIT(3) - -static int md_flags; -module_param_named(sdw_md_flags, md_flags, int, 0444); -MODULE_PARM_DESC(sdw_md_flags, "SoundWire Intel Master device flags (0x0 all off)"); enum intel_pdi_type { INTEL_PDI_IN = 0, @@ -1445,636 +1421,3 @@ const struct sdw_intel_hw_ops sdw_intel_cnl_hw_ops = { }; EXPORT_SYMBOL_NS(sdw_intel_cnl_hw_ops, SOUNDWIRE_INTEL); -static int generic_pre_bank_switch(struct sdw_bus *bus) -{ - struct sdw_cdns *cdns = bus_to_cdns(bus); - struct sdw_intel *sdw = cdns_to_intel(cdns); - - return sdw->link_res->hw_ops->pre_bank_switch(sdw); -} - -static int generic_post_bank_switch(struct sdw_bus *bus) -{ - struct sdw_cdns *cdns = bus_to_cdns(bus); - struct sdw_intel *sdw = cdns_to_intel(cdns); - - return sdw->link_res->hw_ops->post_bank_switch(sdw); -} - -static int sdw_master_read_intel_prop(struct sdw_bus *bus) -{ - struct sdw_master_prop *prop = &bus->prop; - struct fwnode_handle *link; - char name[32]; - u32 quirk_mask; - - /* Find master handle */ - snprintf(name, sizeof(name), - "mipi-sdw-link-%d-subproperties", bus->link_id); - - link = device_get_named_child_node(bus->dev, name); - if (!link) { - dev_err(bus->dev, "Master node %s not found\n", name); - return -EIO; - } - - fwnode_property_read_u32(link, - "intel-sdw-ip-clock", - &prop->mclk_freq); - - /* the values reported by BIOS are the 2x clock, not the bus clock */ - prop->mclk_freq /= 2; - - fwnode_property_read_u32(link, - "intel-quirk-mask", - &quirk_mask); - - if (quirk_mask & SDW_INTEL_QUIRK_MASK_BUS_DISABLE) - prop->hw_disabled = true; - - prop->quirks = SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH | - SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY; - - return 0; -} - -static int intel_prop_read(struct sdw_bus *bus) -{ - /* Initialize with default handler to read all DisCo properties */ - sdw_master_read_prop(bus); - - /* read Intel-specific properties */ - sdw_master_read_intel_prop(bus); - - return 0; -} - -static struct sdw_master_ops sdw_intel_ops = { - .read_prop = intel_prop_read, - .override_adr = sdw_dmi_override_adr, - .xfer_msg = cdns_xfer_msg, - .xfer_msg_defer = cdns_xfer_msg_defer, - .reset_page_addr = cdns_reset_page_addr, - .set_bus_conf = cdns_bus_conf, - .pre_bank_switch = generic_pre_bank_switch, - .post_bank_switch = generic_post_bank_switch, - .read_ping_status = cdns_read_ping_status, -}; - -/* - * probe and init (aux_dev_id argument is required by function prototype but not used) - */ -static int intel_link_probe(struct auxiliary_device *auxdev, - const struct auxiliary_device_id *aux_dev_id) - -{ - struct device *dev = &auxdev->dev; - struct sdw_intel_link_dev *ldev = auxiliary_dev_to_sdw_intel_link_dev(auxdev); - struct sdw_intel *sdw; - struct sdw_cdns *cdns; - struct sdw_bus *bus; - int ret; - - sdw = devm_kzalloc(dev, sizeof(*sdw), GFP_KERNEL); - if (!sdw) - return -ENOMEM; - - cdns = &sdw->cdns; - bus = &cdns->bus; - - sdw->instance = auxdev->id; - sdw->link_res = &ldev->link_res; - cdns->dev = dev; - cdns->registers = sdw->link_res->registers; - cdns->instance = sdw->instance; - cdns->msg_count = 0; - - bus->link_id = auxdev->id; - bus->dev_num_ida_min = INTEL_DEV_NUM_IDA_MIN; - bus->clk_stop_timeout = 1; - - sdw_cdns_probe(cdns); - - /* Set ops */ - bus->ops = &sdw_intel_ops; - - /* set driver data, accessed by snd_soc_dai_get_drvdata() */ - auxiliary_set_drvdata(auxdev, cdns); - - /* use generic bandwidth allocation algorithm */ - sdw->cdns.bus.compute_params = sdw_compute_params; - - /* avoid resuming from pm_runtime suspend if it's not required */ - dev_pm_set_driver_flags(dev, DPM_FLAG_SMART_SUSPEND); - - ret = sdw_bus_master_add(bus, dev, dev->fwnode); - if (ret) { - dev_err(dev, "sdw_bus_master_add fail: %d\n", ret); - return ret; - } - - if (bus->prop.hw_disabled) - dev_info(dev, - "SoundWire master %d is disabled, will be ignored\n", - bus->link_id); - /* - * Ignore BIOS err_threshold, it's a really bad idea when dealing - * with multiple hardware synchronized links - */ - bus->prop.err_threshold = 0; - - return 0; -} - -int intel_link_startup(struct auxiliary_device *auxdev) -{ - struct device *dev = &auxdev->dev; - struct sdw_cdns *cdns = auxiliary_get_drvdata(auxdev); - struct sdw_intel *sdw = cdns_to_intel(cdns); - struct sdw_bus *bus = &cdns->bus; - int link_flags; - bool multi_link; - u32 clock_stop_quirks; - int ret; - - if (bus->prop.hw_disabled) { - dev_info(dev, - "SoundWire master %d is disabled, ignoring\n", - sdw->instance); - return 0; - } - - link_flags = md_flags >> (bus->link_id * 8); - multi_link = !(link_flags & SDW_INTEL_MASTER_DISABLE_MULTI_LINK); - if (!multi_link) { - dev_dbg(dev, "Multi-link is disabled\n"); - } else { - /* - * hardware-based synchronization is required regardless - * of the number of segments used by a stream: SSP-based - * synchronization is gated by gsync when the multi-master - * mode is set. - */ - bus->hw_sync_min_links = 1; - } - bus->multi_link = multi_link; - - /* Initialize shim, controller */ - ret = sdw_intel_link_power_up(sdw); - if (ret) - goto err_init; - - /* Register DAIs */ - ret = sdw_intel_register_dai(sdw); - if (ret) { - dev_err(dev, "DAI registration failed: %d\n", ret); - goto err_power_up; - } - - sdw_intel_debugfs_init(sdw); - - /* start bus */ - ret = sdw_intel_start_bus(sdw); - if (ret) { - dev_err(dev, "bus start failed: %d\n", ret); - goto err_power_up; - } - - /* Enable runtime PM */ - if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME)) { - pm_runtime_set_autosuspend_delay(dev, - INTEL_MASTER_SUSPEND_DELAY_MS); - pm_runtime_use_autosuspend(dev); - pm_runtime_mark_last_busy(dev); - - pm_runtime_set_active(dev); - pm_runtime_enable(dev); - } - - clock_stop_quirks = sdw->link_res->clock_stop_quirks; - if (clock_stop_quirks & SDW_INTEL_CLK_STOP_NOT_ALLOWED) { - /* - * To keep the clock running we need to prevent - * pm_runtime suspend from happening by increasing the - * reference count. - * This quirk is specified by the parent PCI device in - * case of specific latency requirements. It will have - * no effect if pm_runtime is disabled by the user via - * a module parameter for testing purposes. - */ - pm_runtime_get_noresume(dev); - } - - /* - * The runtime PM status of Slave devices is "Unsupported" - * until they report as ATTACHED. If they don't, e.g. because - * there are no Slave devices populated or if the power-on is - * delayed or dependent on a power switch, the Master will - * remain active and prevent its parent from suspending. - * - * Conditionally force the pm_runtime core to re-evaluate the - * Master status in the absence of any Slave activity. A quirk - * is provided to e.g. deal with Slaves that may be powered on - * with a delay. A more complete solution would require the - * definition of Master properties. - */ - if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE)) - pm_runtime_idle(dev); - - sdw->startup_done = true; - return 0; - -err_power_up: - sdw_intel_link_power_down(sdw); -err_init: - return ret; -} - -static void intel_link_remove(struct auxiliary_device *auxdev) -{ - struct sdw_cdns *cdns = auxiliary_get_drvdata(auxdev); - struct sdw_intel *sdw = cdns_to_intel(cdns); - struct sdw_bus *bus = &cdns->bus; - - /* - * Since pm_runtime is already disabled, we don't decrease - * the refcount when the clock_stop_quirk is - * SDW_INTEL_CLK_STOP_NOT_ALLOWED - */ - if (!bus->prop.hw_disabled) { - sdw_intel_debugfs_exit(sdw); - sdw_cdns_enable_interrupt(cdns, false); - } - sdw_bus_master_delete(bus); -} - -int intel_link_process_wakeen_event(struct auxiliary_device *auxdev) -{ - struct device *dev = &auxdev->dev; - struct sdw_intel *sdw; - struct sdw_bus *bus; - - sdw = auxiliary_get_drvdata(auxdev); - bus = &sdw->cdns.bus; - - if (bus->prop.hw_disabled || !sdw->startup_done) { - dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", - bus->link_id); - return 0; - } - - if (!sdw_intel_shim_check_wake(sdw)) - return 0; - - /* disable WAKEEN interrupt ASAP to prevent interrupt flood */ - sdw_intel_shim_wake(sdw, false); - - /* - * resume the Master, which will generate a bus reset and result in - * Slaves re-attaching and be re-enumerated. The SoundWire physical - * device which generated the wake will trigger an interrupt, which - * will in turn cause the corresponding Linux Slave device to be - * resumed and the Slave codec driver to check the status. - */ - pm_request_resume(dev); - - return 0; -} - -/* - * PM calls - */ - -static int intel_resume_child_device(struct device *dev, void *data) -{ - int ret; - struct sdw_slave *slave = dev_to_sdw_dev(dev); - - if (!slave->probed) { - dev_dbg(dev, "skipping device, no probed driver\n"); - return 0; - } - if (!slave->dev_num_sticky) { - dev_dbg(dev, "skipping device, never detected on bus\n"); - return 0; - } - - ret = pm_request_resume(dev); - if (ret < 0) - dev_err(dev, "%s: pm_request_resume failed: %d\n", __func__, ret); - - return ret; -} - -static int __maybe_unused intel_pm_prepare(struct device *dev) -{ - struct sdw_cdns *cdns = dev_get_drvdata(dev); - struct sdw_intel *sdw = cdns_to_intel(cdns); - struct sdw_bus *bus = &cdns->bus; - u32 clock_stop_quirks; - int ret; - - if (bus->prop.hw_disabled || !sdw->startup_done) { - dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", - bus->link_id); - return 0; - } - - clock_stop_quirks = sdw->link_res->clock_stop_quirks; - - if (pm_runtime_suspended(dev) && - pm_runtime_suspended(dev->parent) && - ((clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) || - !clock_stop_quirks)) { - /* - * if we've enabled clock stop, and the parent is suspended, the SHIM registers - * are not accessible and the shim wake cannot be disabled. - * The only solution is to resume the entire bus to full power - */ - - /* - * If any operation in this block fails, we keep going since we don't want - * to prevent system suspend from happening and errors should be recoverable - * on resume. - */ - - /* - * first resume the device for this link. This will also by construction - * resume the PCI parent device. - */ - ret = pm_request_resume(dev); - if (ret < 0) { - dev_err(dev, "%s: pm_request_resume failed: %d\n", __func__, ret); - return 0; - } - - /* - * Continue resuming the entire bus (parent + child devices) to exit - * the clock stop mode. If there are no devices connected on this link - * this is a no-op. - * The resume to full power could have been implemented with a .prepare - * step in SoundWire codec drivers. This would however require a lot - * of code to handle an Intel-specific corner case. It is simpler in - * practice to add a loop at the link level. - */ - ret = device_for_each_child(bus->dev, NULL, intel_resume_child_device); - - if (ret < 0) - dev_err(dev, "%s: intel_resume_child_device failed: %d\n", __func__, ret); - } - - return 0; -} - -static int __maybe_unused intel_suspend(struct device *dev) -{ - struct sdw_cdns *cdns = dev_get_drvdata(dev); - struct sdw_intel *sdw = cdns_to_intel(cdns); - struct sdw_bus *bus = &cdns->bus; - u32 clock_stop_quirks; - int ret; - - if (bus->prop.hw_disabled || !sdw->startup_done) { - dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", - bus->link_id); - return 0; - } - - if (pm_runtime_suspended(dev)) { - dev_dbg(dev, "pm_runtime status: suspended\n"); - - clock_stop_quirks = sdw->link_res->clock_stop_quirks; - - if ((clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) || - !clock_stop_quirks) { - - if (pm_runtime_suspended(dev->parent)) { - /* - * paranoia check: this should not happen with the .prepare - * resume to full power - */ - dev_err(dev, "%s: invalid config: parent is suspended\n", __func__); - } else { - sdw_intel_shim_wake(sdw, false); - } - } - - return 0; - } - - ret = sdw_intel_stop_bus(sdw, false); - if (ret < 0) { - dev_err(dev, "%s: cannot stop bus: %d\n", __func__, ret); - return ret; - } - - return 0; -} - -static int __maybe_unused intel_suspend_runtime(struct device *dev) -{ - struct sdw_cdns *cdns = dev_get_drvdata(dev); - struct sdw_intel *sdw = cdns_to_intel(cdns); - struct sdw_bus *bus = &cdns->bus; - u32 clock_stop_quirks; - int ret; - - if (bus->prop.hw_disabled || !sdw->startup_done) { - dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", - bus->link_id); - return 0; - } - - clock_stop_quirks = sdw->link_res->clock_stop_quirks; - - if (clock_stop_quirks & SDW_INTEL_CLK_STOP_TEARDOWN) { - ret = sdw_intel_stop_bus(sdw, false); - if (ret < 0) { - dev_err(dev, "%s: cannot stop bus during teardown: %d\n", - __func__, ret); - return ret; - } - } else if (clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET || !clock_stop_quirks) { - ret = sdw_intel_stop_bus(sdw, true); - if (ret < 0) { - dev_err(dev, "%s: cannot stop bus during clock_stop: %d\n", - __func__, ret); - return ret; - } - } else { - dev_err(dev, "%s clock_stop_quirks %x unsupported\n", - __func__, clock_stop_quirks); - ret = -EINVAL; - } - - return ret; -} - -static int __maybe_unused intel_resume(struct device *dev) -{ - struct sdw_cdns *cdns = dev_get_drvdata(dev); - struct sdw_intel *sdw = cdns_to_intel(cdns); - struct sdw_bus *bus = &cdns->bus; - int link_flags; - int ret; - - if (bus->prop.hw_disabled || !sdw->startup_done) { - dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", - bus->link_id); - return 0; - } - - link_flags = md_flags >> (bus->link_id * 8); - - if (pm_runtime_suspended(dev)) { - dev_dbg(dev, "pm_runtime status was suspended, forcing active\n"); - - /* follow required sequence from runtime_pm.rst */ - pm_runtime_disable(dev); - pm_runtime_set_active(dev); - pm_runtime_mark_last_busy(dev); - pm_runtime_enable(dev); - - link_flags = md_flags >> (bus->link_id * 8); - - if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE)) - pm_runtime_idle(dev); - } - - ret = sdw_intel_link_power_up(sdw); - if (ret) { - dev_err(dev, "%s failed: %d\n", __func__, ret); - return ret; - } - - /* - * make sure all Slaves are tagged as UNATTACHED and provide - * reason for reinitialization - */ - sdw_clear_slave_status(bus, SDW_UNATTACH_REQUEST_MASTER_RESET); - - ret = sdw_intel_start_bus(sdw); - if (ret < 0) { - dev_err(dev, "cannot start bus during resume\n"); - sdw_intel_link_power_down(sdw); - return ret; - } - - /* - * after system resume, the pm_runtime suspend() may kick in - * during the enumeration, before any children device force the - * master device to remain active. Using pm_runtime_get() - * routines is not really possible, since it'd prevent the - * master from suspending. - * A reasonable compromise is to update the pm_runtime - * counters and delay the pm_runtime suspend by several - * seconds, by when all enumeration should be complete. - */ - pm_runtime_mark_last_busy(dev); - - return 0; -} - -static int __maybe_unused intel_resume_runtime(struct device *dev) -{ - struct sdw_cdns *cdns = dev_get_drvdata(dev); - struct sdw_intel *sdw = cdns_to_intel(cdns); - struct sdw_bus *bus = &cdns->bus; - u32 clock_stop_quirks; - int ret; - - if (bus->prop.hw_disabled || !sdw->startup_done) { - dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", - bus->link_id); - return 0; - } - - /* unconditionally disable WAKEEN interrupt */ - sdw_intel_shim_wake(sdw, false); - - clock_stop_quirks = sdw->link_res->clock_stop_quirks; - - if (clock_stop_quirks & SDW_INTEL_CLK_STOP_TEARDOWN) { - ret = sdw_intel_link_power_up(sdw); - if (ret) { - dev_err(dev, "%s: power_up failed after teardown: %d\n", __func__, ret); - return ret; - } - - /* - * make sure all Slaves are tagged as UNATTACHED and provide - * reason for reinitialization - */ - sdw_clear_slave_status(bus, SDW_UNATTACH_REQUEST_MASTER_RESET); - - ret = sdw_intel_start_bus(sdw); - if (ret < 0) { - dev_err(dev, "%s: cannot start bus after teardown: %d\n", __func__, ret); - sdw_intel_link_power_down(sdw); - return ret; - } - - - } else if (clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) { - ret = sdw_intel_link_power_up(sdw); - if (ret) { - dev_err(dev, "%s: power_up failed after bus reset: %d\n", __func__, ret); - return ret; - } - - ret = sdw_intel_start_bus_after_reset(sdw); - if (ret < 0) { - dev_err(dev, "%s: cannot start bus after reset: %d\n", __func__, ret); - sdw_intel_link_power_down(sdw); - return ret; - } - } else if (!clock_stop_quirks) { - - sdw_intel_check_clock_stop(sdw); - - ret = sdw_intel_link_power_up(sdw); - if (ret) { - dev_err(dev, "%s: power_up failed: %d\n", __func__, ret); - return ret; - } - - ret = sdw_intel_start_bus_after_clock_stop(sdw); - if (ret < 0) { - dev_err(dev, "%s: cannot start bus after clock stop: %d\n", __func__, ret); - sdw_intel_link_power_down(sdw); - return ret; - } - } else { - dev_err(dev, "%s: clock_stop_quirks %x unsupported\n", - __func__, clock_stop_quirks); - ret = -EINVAL; - } - - return ret; -} - -static const struct dev_pm_ops intel_pm = { - .prepare = intel_pm_prepare, - SET_SYSTEM_SLEEP_PM_OPS(intel_suspend, intel_resume) - SET_RUNTIME_PM_OPS(intel_suspend_runtime, intel_resume_runtime, NULL) -}; - -static const struct auxiliary_device_id intel_link_id_table[] = { - { .name = "soundwire_intel.link" }, - {}, -}; -MODULE_DEVICE_TABLE(auxiliary, intel_link_id_table); - -static struct auxiliary_driver sdw_intel_drv = { - .probe = intel_link_probe, - .remove = intel_link_remove, - .driver = { - /* auxiliary_driver_register() sets .name to be the modname */ - .pm = &intel_pm, - }, - .id_table = intel_link_id_table -}; -module_auxiliary_driver(sdw_intel_drv); - -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_DESCRIPTION("Intel Soundwire Link Driver"); diff --git a/drivers/soundwire/intel.h b/drivers/soundwire/intel.h index 9ac3397757a0..de9883313c8f 100644 --- a/drivers/soundwire/intel.h +++ b/drivers/soundwire/intel.h @@ -50,16 +50,9 @@ struct sdw_intel { #endif }; -int intel_link_startup(struct auxiliary_device *auxdev); -int intel_link_process_wakeen_event(struct auxiliary_device *auxdev); +#define cdns_to_intel(_cdns) container_of(_cdns, struct sdw_intel, cdns) -struct sdw_intel_link_dev { - struct auxiliary_device auxdev; - struct sdw_intel_link_res link_res; -}; - -#define auxiliary_dev_to_sdw_intel_link_dev(auxiliary_dev) \ - container_of(auxiliary_dev, struct sdw_intel_link_dev, auxdev) +#define INTEL_MASTER_RESET_ITERATIONS 10 #define SDW_INTEL_CHECK_OPS(sdw, cb) ((sdw) && (sdw)->link_res && (sdw)->link_res->hw_ops && \ (sdw)->link_res->hw_ops->cb) diff --git a/drivers/soundwire/intel_auxdevice.c b/drivers/soundwire/intel_auxdevice.c new file mode 100644 index 000000000000..96c6b2112feb --- /dev/null +++ b/drivers/soundwire/intel_auxdevice.c @@ -0,0 +1,678 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-22 Intel Corporation. + +/* + * Soundwire Intel Manager Driver + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "cadence_master.h" +#include "bus.h" +#include "intel.h" +#include "intel_auxdevice.h" + +/* IDA min selected to avoid conflicts with HDaudio/iDISP SDI values */ +#define INTEL_DEV_NUM_IDA_MIN 4 + +#define INTEL_MASTER_SUSPEND_DELAY_MS 3000 + +/* + * debug/config flags for the Intel SoundWire Master. + * + * Since we may have multiple masters active, we can have up to 8 + * flags reused in each byte, with master0 using the ls-byte, etc. + */ + +#define SDW_INTEL_MASTER_DISABLE_PM_RUNTIME BIT(0) +#define SDW_INTEL_MASTER_DISABLE_CLOCK_STOP BIT(1) +#define SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE BIT(2) +#define SDW_INTEL_MASTER_DISABLE_MULTI_LINK BIT(3) + +static int md_flags; +module_param_named(sdw_md_flags, md_flags, int, 0444); +MODULE_PARM_DESC(sdw_md_flags, "SoundWire Intel Master device flags (0x0 all off)"); + +static int generic_pre_bank_switch(struct sdw_bus *bus) +{ + struct sdw_cdns *cdns = bus_to_cdns(bus); + struct sdw_intel *sdw = cdns_to_intel(cdns); + + return sdw->link_res->hw_ops->pre_bank_switch(sdw); +} + +static int generic_post_bank_switch(struct sdw_bus *bus) +{ + struct sdw_cdns *cdns = bus_to_cdns(bus); + struct sdw_intel *sdw = cdns_to_intel(cdns); + + return sdw->link_res->hw_ops->post_bank_switch(sdw); +} + +static int sdw_master_read_intel_prop(struct sdw_bus *bus) +{ + struct sdw_master_prop *prop = &bus->prop; + struct fwnode_handle *link; + char name[32]; + u32 quirk_mask; + + /* Find master handle */ + snprintf(name, sizeof(name), + "mipi-sdw-link-%d-subproperties", bus->link_id); + + link = device_get_named_child_node(bus->dev, name); + if (!link) { + dev_err(bus->dev, "Master node %s not found\n", name); + return -EIO; + } + + fwnode_property_read_u32(link, + "intel-sdw-ip-clock", + &prop->mclk_freq); + + /* the values reported by BIOS are the 2x clock, not the bus clock */ + prop->mclk_freq /= 2; + + fwnode_property_read_u32(link, + "intel-quirk-mask", + &quirk_mask); + + if (quirk_mask & SDW_INTEL_QUIRK_MASK_BUS_DISABLE) + prop->hw_disabled = true; + + prop->quirks = SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH | + SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY; + + return 0; +} + +static int intel_prop_read(struct sdw_bus *bus) +{ + /* Initialize with default handler to read all DisCo properties */ + sdw_master_read_prop(bus); + + /* read Intel-specific properties */ + sdw_master_read_intel_prop(bus); + + return 0; +} + +static struct sdw_master_ops sdw_intel_ops = { + .read_prop = intel_prop_read, + .override_adr = sdw_dmi_override_adr, + .xfer_msg = cdns_xfer_msg, + .xfer_msg_defer = cdns_xfer_msg_defer, + .reset_page_addr = cdns_reset_page_addr, + .set_bus_conf = cdns_bus_conf, + .pre_bank_switch = generic_pre_bank_switch, + .post_bank_switch = generic_post_bank_switch, + .read_ping_status = cdns_read_ping_status, +}; + +/* + * probe and init (aux_dev_id argument is required by function prototype but not used) + */ +static int intel_link_probe(struct auxiliary_device *auxdev, + const struct auxiliary_device_id *aux_dev_id) + +{ + struct device *dev = &auxdev->dev; + struct sdw_intel_link_dev *ldev = auxiliary_dev_to_sdw_intel_link_dev(auxdev); + struct sdw_intel *sdw; + struct sdw_cdns *cdns; + struct sdw_bus *bus; + int ret; + + sdw = devm_kzalloc(dev, sizeof(*sdw), GFP_KERNEL); + if (!sdw) + return -ENOMEM; + + cdns = &sdw->cdns; + bus = &cdns->bus; + + sdw->instance = auxdev->id; + sdw->link_res = &ldev->link_res; + cdns->dev = dev; + cdns->registers = sdw->link_res->registers; + cdns->instance = sdw->instance; + cdns->msg_count = 0; + + bus->link_id = auxdev->id; + bus->dev_num_ida_min = INTEL_DEV_NUM_IDA_MIN; + bus->clk_stop_timeout = 1; + + sdw_cdns_probe(cdns); + + /* Set ops */ + bus->ops = &sdw_intel_ops; + + /* set driver data, accessed by snd_soc_dai_get_drvdata() */ + auxiliary_set_drvdata(auxdev, cdns); + + /* use generic bandwidth allocation algorithm */ + sdw->cdns.bus.compute_params = sdw_compute_params; + + /* avoid resuming from pm_runtime suspend if it's not required */ + dev_pm_set_driver_flags(dev, DPM_FLAG_SMART_SUSPEND); + + ret = sdw_bus_master_add(bus, dev, dev->fwnode); + if (ret) { + dev_err(dev, "sdw_bus_master_add fail: %d\n", ret); + return ret; + } + + if (bus->prop.hw_disabled) + dev_info(dev, + "SoundWire master %d is disabled, will be ignored\n", + bus->link_id); + /* + * Ignore BIOS err_threshold, it's a really bad idea when dealing + * with multiple hardware synchronized links + */ + bus->prop.err_threshold = 0; + + return 0; +} + +int intel_link_startup(struct auxiliary_device *auxdev) +{ + struct device *dev = &auxdev->dev; + struct sdw_cdns *cdns = auxiliary_get_drvdata(auxdev); + struct sdw_intel *sdw = cdns_to_intel(cdns); + struct sdw_bus *bus = &cdns->bus; + int link_flags; + bool multi_link; + u32 clock_stop_quirks; + int ret; + + if (bus->prop.hw_disabled) { + dev_info(dev, + "SoundWire master %d is disabled, ignoring\n", + sdw->instance); + return 0; + } + + link_flags = md_flags >> (bus->link_id * 8); + multi_link = !(link_flags & SDW_INTEL_MASTER_DISABLE_MULTI_LINK); + if (!multi_link) { + dev_dbg(dev, "Multi-link is disabled\n"); + } else { + /* + * hardware-based synchronization is required regardless + * of the number of segments used by a stream: SSP-based + * synchronization is gated by gsync when the multi-master + * mode is set. + */ + bus->hw_sync_min_links = 1; + } + bus->multi_link = multi_link; + + /* Initialize shim, controller */ + ret = sdw_intel_link_power_up(sdw); + if (ret) + goto err_init; + + /* Register DAIs */ + ret = sdw_intel_register_dai(sdw); + if (ret) { + dev_err(dev, "DAI registration failed: %d\n", ret); + goto err_power_up; + } + + sdw_intel_debugfs_init(sdw); + + /* start bus */ + ret = sdw_intel_start_bus(sdw); + if (ret) { + dev_err(dev, "bus start failed: %d\n", ret); + goto err_power_up; + } + + /* Enable runtime PM */ + if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME)) { + pm_runtime_set_autosuspend_delay(dev, + INTEL_MASTER_SUSPEND_DELAY_MS); + pm_runtime_use_autosuspend(dev); + pm_runtime_mark_last_busy(dev); + + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + } + + clock_stop_quirks = sdw->link_res->clock_stop_quirks; + if (clock_stop_quirks & SDW_INTEL_CLK_STOP_NOT_ALLOWED) { + /* + * To keep the clock running we need to prevent + * pm_runtime suspend from happening by increasing the + * reference count. + * This quirk is specified by the parent PCI device in + * case of specific latency requirements. It will have + * no effect if pm_runtime is disabled by the user via + * a module parameter for testing purposes. + */ + pm_runtime_get_noresume(dev); + } + + /* + * The runtime PM status of Slave devices is "Unsupported" + * until they report as ATTACHED. If they don't, e.g. because + * there are no Slave devices populated or if the power-on is + * delayed or dependent on a power switch, the Master will + * remain active and prevent its parent from suspending. + * + * Conditionally force the pm_runtime core to re-evaluate the + * Master status in the absence of any Slave activity. A quirk + * is provided to e.g. deal with Slaves that may be powered on + * with a delay. A more complete solution would require the + * definition of Master properties. + */ + if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE)) + pm_runtime_idle(dev); + + sdw->startup_done = true; + return 0; + +err_power_up: + sdw_intel_link_power_down(sdw); +err_init: + return ret; +} + +static void intel_link_remove(struct auxiliary_device *auxdev) +{ + struct sdw_cdns *cdns = auxiliary_get_drvdata(auxdev); + struct sdw_intel *sdw = cdns_to_intel(cdns); + struct sdw_bus *bus = &cdns->bus; + + /* + * Since pm_runtime is already disabled, we don't decrease + * the refcount when the clock_stop_quirk is + * SDW_INTEL_CLK_STOP_NOT_ALLOWED + */ + if (!bus->prop.hw_disabled) { + sdw_intel_debugfs_exit(sdw); + sdw_cdns_enable_interrupt(cdns, false); + } + sdw_bus_master_delete(bus); +} + +int intel_link_process_wakeen_event(struct auxiliary_device *auxdev) +{ + struct device *dev = &auxdev->dev; + struct sdw_intel *sdw; + struct sdw_bus *bus; + + sdw = auxiliary_get_drvdata(auxdev); + bus = &sdw->cdns.bus; + + if (bus->prop.hw_disabled || !sdw->startup_done) { + dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", + bus->link_id); + return 0; + } + + if (!sdw_intel_shim_check_wake(sdw)) + return 0; + + /* disable WAKEEN interrupt ASAP to prevent interrupt flood */ + sdw_intel_shim_wake(sdw, false); + + /* + * resume the Master, which will generate a bus reset and result in + * Slaves re-attaching and be re-enumerated. The SoundWire physical + * device which generated the wake will trigger an interrupt, which + * will in turn cause the corresponding Linux Slave device to be + * resumed and the Slave codec driver to check the status. + */ + pm_request_resume(dev); + + return 0; +} + +/* + * PM calls + */ + +static int intel_resume_child_device(struct device *dev, void *data) +{ + int ret; + struct sdw_slave *slave = dev_to_sdw_dev(dev); + + if (!slave->probed) { + dev_dbg(dev, "skipping device, no probed driver\n"); + return 0; + } + if (!slave->dev_num_sticky) { + dev_dbg(dev, "skipping device, never detected on bus\n"); + return 0; + } + + ret = pm_request_resume(dev); + if (ret < 0) + dev_err(dev, "%s: pm_request_resume failed: %d\n", __func__, ret); + + return ret; +} + +static int __maybe_unused intel_pm_prepare(struct device *dev) +{ + struct sdw_cdns *cdns = dev_get_drvdata(dev); + struct sdw_intel *sdw = cdns_to_intel(cdns); + struct sdw_bus *bus = &cdns->bus; + u32 clock_stop_quirks; + int ret; + + if (bus->prop.hw_disabled || !sdw->startup_done) { + dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", + bus->link_id); + return 0; + } + + clock_stop_quirks = sdw->link_res->clock_stop_quirks; + + if (pm_runtime_suspended(dev) && + pm_runtime_suspended(dev->parent) && + ((clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) || + !clock_stop_quirks)) { + /* + * if we've enabled clock stop, and the parent is suspended, the SHIM registers + * are not accessible and the shim wake cannot be disabled. + * The only solution is to resume the entire bus to full power + */ + + /* + * If any operation in this block fails, we keep going since we don't want + * to prevent system suspend from happening and errors should be recoverable + * on resume. + */ + + /* + * first resume the device for this link. This will also by construction + * resume the PCI parent device. + */ + ret = pm_request_resume(dev); + if (ret < 0) { + dev_err(dev, "%s: pm_request_resume failed: %d\n", __func__, ret); + return 0; + } + + /* + * Continue resuming the entire bus (parent + child devices) to exit + * the clock stop mode. If there are no devices connected on this link + * this is a no-op. + * The resume to full power could have been implemented with a .prepare + * step in SoundWire codec drivers. This would however require a lot + * of code to handle an Intel-specific corner case. It is simpler in + * practice to add a loop at the link level. + */ + ret = device_for_each_child(bus->dev, NULL, intel_resume_child_device); + + if (ret < 0) + dev_err(dev, "%s: intel_resume_child_device failed: %d\n", __func__, ret); + } + + return 0; +} + +static int __maybe_unused intel_suspend(struct device *dev) +{ + struct sdw_cdns *cdns = dev_get_drvdata(dev); + struct sdw_intel *sdw = cdns_to_intel(cdns); + struct sdw_bus *bus = &cdns->bus; + u32 clock_stop_quirks; + int ret; + + if (bus->prop.hw_disabled || !sdw->startup_done) { + dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", + bus->link_id); + return 0; + } + + if (pm_runtime_suspended(dev)) { + dev_dbg(dev, "pm_runtime status: suspended\n"); + + clock_stop_quirks = sdw->link_res->clock_stop_quirks; + + if ((clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) || + !clock_stop_quirks) { + + if (pm_runtime_suspended(dev->parent)) { + /* + * paranoia check: this should not happen with the .prepare + * resume to full power + */ + dev_err(dev, "%s: invalid config: parent is suspended\n", __func__); + } else { + sdw_intel_shim_wake(sdw, false); + } + } + + return 0; + } + + ret = sdw_intel_stop_bus(sdw, false); + if (ret < 0) { + dev_err(dev, "%s: cannot stop bus: %d\n", __func__, ret); + return ret; + } + + return 0; +} + +static int __maybe_unused intel_suspend_runtime(struct device *dev) +{ + struct sdw_cdns *cdns = dev_get_drvdata(dev); + struct sdw_intel *sdw = cdns_to_intel(cdns); + struct sdw_bus *bus = &cdns->bus; + u32 clock_stop_quirks; + int ret; + + if (bus->prop.hw_disabled || !sdw->startup_done) { + dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", + bus->link_id); + return 0; + } + + clock_stop_quirks = sdw->link_res->clock_stop_quirks; + + if (clock_stop_quirks & SDW_INTEL_CLK_STOP_TEARDOWN) { + ret = sdw_intel_stop_bus(sdw, false); + if (ret < 0) { + dev_err(dev, "%s: cannot stop bus during teardown: %d\n", + __func__, ret); + return ret; + } + } else if (clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET || !clock_stop_quirks) { + ret = sdw_intel_stop_bus(sdw, true); + if (ret < 0) { + dev_err(dev, "%s: cannot stop bus during clock_stop: %d\n", + __func__, ret); + return ret; + } + } else { + dev_err(dev, "%s clock_stop_quirks %x unsupported\n", + __func__, clock_stop_quirks); + ret = -EINVAL; + } + + return ret; +} + +static int __maybe_unused intel_resume(struct device *dev) +{ + struct sdw_cdns *cdns = dev_get_drvdata(dev); + struct sdw_intel *sdw = cdns_to_intel(cdns); + struct sdw_bus *bus = &cdns->bus; + int link_flags; + int ret; + + if (bus->prop.hw_disabled || !sdw->startup_done) { + dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", + bus->link_id); + return 0; + } + + link_flags = md_flags >> (bus->link_id * 8); + + if (pm_runtime_suspended(dev)) { + dev_dbg(dev, "pm_runtime status was suspended, forcing active\n"); + + /* follow required sequence from runtime_pm.rst */ + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_mark_last_busy(dev); + pm_runtime_enable(dev); + + link_flags = md_flags >> (bus->link_id * 8); + + if (!(link_flags & SDW_INTEL_MASTER_DISABLE_PM_RUNTIME_IDLE)) + pm_runtime_idle(dev); + } + + ret = sdw_intel_link_power_up(sdw); + if (ret) { + dev_err(dev, "%s failed: %d\n", __func__, ret); + return ret; + } + + /* + * make sure all Slaves are tagged as UNATTACHED and provide + * reason for reinitialization + */ + sdw_clear_slave_status(bus, SDW_UNATTACH_REQUEST_MASTER_RESET); + + ret = sdw_intel_start_bus(sdw); + if (ret < 0) { + dev_err(dev, "cannot start bus during resume\n"); + sdw_intel_link_power_down(sdw); + return ret; + } + + /* + * after system resume, the pm_runtime suspend() may kick in + * during the enumeration, before any children device force the + * master device to remain active. Using pm_runtime_get() + * routines is not really possible, since it'd prevent the + * master from suspending. + * A reasonable compromise is to update the pm_runtime + * counters and delay the pm_runtime suspend by several + * seconds, by when all enumeration should be complete. + */ + pm_runtime_mark_last_busy(dev); + + return 0; +} + +static int __maybe_unused intel_resume_runtime(struct device *dev) +{ + struct sdw_cdns *cdns = dev_get_drvdata(dev); + struct sdw_intel *sdw = cdns_to_intel(cdns); + struct sdw_bus *bus = &cdns->bus; + u32 clock_stop_quirks; + int ret; + + if (bus->prop.hw_disabled || !sdw->startup_done) { + dev_dbg(dev, "SoundWire master %d is disabled or not-started, ignoring\n", + bus->link_id); + return 0; + } + + /* unconditionally disable WAKEEN interrupt */ + sdw_intel_shim_wake(sdw, false); + + clock_stop_quirks = sdw->link_res->clock_stop_quirks; + + if (clock_stop_quirks & SDW_INTEL_CLK_STOP_TEARDOWN) { + ret = sdw_intel_link_power_up(sdw); + if (ret) { + dev_err(dev, "%s: power_up failed after teardown: %d\n", __func__, ret); + return ret; + } + + /* + * make sure all Slaves are tagged as UNATTACHED and provide + * reason for reinitialization + */ + sdw_clear_slave_status(bus, SDW_UNATTACH_REQUEST_MASTER_RESET); + + ret = sdw_intel_start_bus(sdw); + if (ret < 0) { + dev_err(dev, "%s: cannot start bus after teardown: %d\n", __func__, ret); + sdw_intel_link_power_down(sdw); + return ret; + } + + } else if (clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET) { + ret = sdw_intel_link_power_up(sdw); + if (ret) { + dev_err(dev, "%s: power_up failed after bus reset: %d\n", __func__, ret); + return ret; + } + + ret = sdw_intel_start_bus_after_reset(sdw); + if (ret < 0) { + dev_err(dev, "%s: cannot start bus after reset: %d\n", __func__, ret); + sdw_intel_link_power_down(sdw); + return ret; + } + } else if (!clock_stop_quirks) { + + sdw_intel_check_clock_stop(sdw); + + ret = sdw_intel_link_power_up(sdw); + if (ret) { + dev_err(dev, "%s: power_up failed: %d\n", __func__, ret); + return ret; + } + + ret = sdw_intel_start_bus_after_clock_stop(sdw); + if (ret < 0) { + dev_err(dev, "%s: cannot start bus after clock stop: %d\n", __func__, ret); + sdw_intel_link_power_down(sdw); + return ret; + } + } else { + dev_err(dev, "%s: clock_stop_quirks %x unsupported\n", + __func__, clock_stop_quirks); + ret = -EINVAL; + } + + return ret; +} + +static const struct dev_pm_ops intel_pm = { + .prepare = intel_pm_prepare, + SET_SYSTEM_SLEEP_PM_OPS(intel_suspend, intel_resume) + SET_RUNTIME_PM_OPS(intel_suspend_runtime, intel_resume_runtime, NULL) +}; + +static const struct auxiliary_device_id intel_link_id_table[] = { + { .name = "soundwire_intel.link" }, + {}, +}; +MODULE_DEVICE_TABLE(auxiliary, intel_link_id_table); + +static struct auxiliary_driver sdw_intel_drv = { + .probe = intel_link_probe, + .remove = intel_link_remove, + .driver = { + /* auxiliary_driver_register() sets .name to be the modname */ + .pm = &intel_pm, + }, + .id_table = intel_link_id_table +}; +module_auxiliary_driver(sdw_intel_drv); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("Intel Soundwire Link Driver"); diff --git a/drivers/soundwire/intel_auxdevice.h b/drivers/soundwire/intel_auxdevice.h new file mode 100644 index 000000000000..a00ecde95563 --- /dev/null +++ b/drivers/soundwire/intel_auxdevice.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */ +/* Copyright(c) 2015-2022 Intel Corporation. */ + +#ifndef __SDW_INTEL_AUXDEVICE_H +#define __SDW_INTEL_AUXDEVICE_H + +int intel_link_startup(struct auxiliary_device *auxdev); +int intel_link_process_wakeen_event(struct auxiliary_device *auxdev); + +struct sdw_intel_link_dev { + struct auxiliary_device auxdev; + struct sdw_intel_link_res link_res; +}; + +#define auxiliary_dev_to_sdw_intel_link_dev(auxiliary_dev) \ + container_of(auxiliary_dev, struct sdw_intel_link_dev, auxdev) + +#endif /* __SDW_INTEL_AUXDEVICE_H */ diff --git a/drivers/soundwire/intel_init.c b/drivers/soundwire/intel_init.c index 1e6d74b3e773..b3a8db7c3b77 100644 --- a/drivers/soundwire/intel_init.c +++ b/drivers/soundwire/intel_init.c @@ -17,6 +17,7 @@ #include #include "cadence_master.h" #include "intel.h" +#include "intel_auxdevice.h" static void intel_link_dev_release(struct device *dev) {