| Message ID | 20221111113547.100442-3-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ASoC: dt-bindings: Rework Qualcomm APR/GPR Sound nodes for SM8450 | expand |
On Fri, 11 Nov 2022 12:35:39 +0100, Krzysztof Kozlowski wrote: > The APR/GPR nodes are organized like: > > apr-or-gpr-device-node <- qcom,apr.yaml > apr-gpr-service@[0-9] <- qcom,apr.yaml > service-specific-components <- /schemas/sound/qcom,q6*.yaml > > The schema for services (apr-gpr-service@[0-9]) already grows > considerably and is still quite not specific. It allows several > incorrect combinations, like adding a clock-controller to a APM device. > Restricting it would complicate the schema even more. Bringing new > support for sound on Qualcomm SM8450 and SC8280XP SoC would grow it as > well. > > Simplify the qcom,apr.yaml by splitting the services to a shared file > which will be: > 1. Referenced by qcom,apr.yaml with additionalProperties:true, > 2. Referenced by specific bindings for services with > additionalProperties:false (not yet in this commit). > > While moving the code, add also required 'reg' and > 'qcom,protection-domain' to further constrain the bindings. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > .../bindings/soc/qcom/qcom,apr-services.yaml | 54 +++++++++ > .../bindings/soc/qcom/qcom,apr.yaml | 108 +----------------- > MAINTAINERS | 2 +- > 3 files changed, 58 insertions(+), 106 deletions(-) > create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/soc/qcom/qcom,apr.example.dtb:0:0: /example-0/apr/service@3: failed to match any schema with compatible: ['qcom,q6core'] Documentation/devicetree/bindings/soc/qcom/qcom,apr.example.dtb:0:0: /example-0/apr/service@4: failed to match any schema with compatible: ['qcom,q6afe'] Documentation/devicetree/bindings/soc/qcom/qcom,apr.example.dtb:0:0: /example-0/apr/service@7: failed to match any schema with compatible: ['qcom,q6asm'] Documentation/devicetree/bindings/soc/qcom/qcom,apr.example.dtb:0:0: /example-0/apr/service@8: failed to match any schema with compatible: ['qcom,q6adm'] Documentation/devicetree/bindings/soc/qcom/qcom,apr.example.dtb:0:0: /example-1/gpr/service@1: failed to match any schema with compatible: ['qcom,q6apm'] Documentation/devicetree/bindings/sound/qcom,q6adm-routing.example.dtb:0:0: /example-0/apr/service@8: failed to match any schema with compatible: ['qcom,q6adm'] Documentation/devicetree/bindings/sound/qcom,q6asm-dais.example.dtb:0:0: /example-0/apr/service@7: failed to match any schema with compatible: ['qcom,q6asm'] Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.example.dtb:0:0: /example-0/apr/service@4: failed to match any schema with compatible: ['qcom,q6afe'] /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.example.dtb: gpr: service@2: 'qcom,protection-domain' is a required property From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.example.dtb:0:0: /example-1/gpr/service@2: failed to match any schema with compatible: ['qcom,q6prm'] /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.example.dtb: gpr: service@1: 'qcom,protection-domain' is a required property From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml Documentation/devicetree/bindings/sound/qcom,q6apm-dai.example.dtb:0:0: /example-0/gpr/service@1: failed to match any schema with compatible: ['qcom,q6apm'] Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.example.dtb:0:0: /example-0/apr/service@4: failed to match any schema with compatible: ['qcom,q6afe'] /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.example.dtb: gpr: service@1: 'qcom,protection-domain' is a required property From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.example.dtb:0:0: /example-1/gpr/service@1: failed to match any schema with compatible: ['qcom,q6apm'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On 11/11/2022 14:30, Rob Herring wrote: > > On Fri, 11 Nov 2022 12:35:39 +0100, Krzysztof Kozlowski wrote: >> The APR/GPR nodes are organized like: >> >> apr-or-gpr-device-node <- qcom,apr.yaml >> apr-gpr-service@[0-9] <- qcom,apr.yaml >> service-specific-components <- /schemas/sound/qcom,q6*.yaml >> >> The schema for services (apr-gpr-service@[0-9]) already grows >> considerably and is still quite not specific. It allows several >> incorrect combinations, like adding a clock-controller to a APM device. >> Restricting it would complicate the schema even more. Bringing new >> support for sound on Qualcomm SM8450 and SC8280XP SoC would grow it as >> well. >> >> Simplify the qcom,apr.yaml by splitting the services to a shared file >> which will be: >> 1. Referenced by qcom,apr.yaml with additionalProperties:true, >> 2. Referenced by specific bindings for services with >> additionalProperties:false (not yet in this commit). >> >> While moving the code, add also required 'reg' and >> 'qcom,protection-domain' to further constrain the bindings. >> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> --- >> .../bindings/soc/qcom/qcom,apr-services.yaml | 54 +++++++++ >> .../bindings/soc/qcom/qcom,apr.yaml | 108 +----------------- >> MAINTAINERS | 2 +- >> 3 files changed, 58 insertions(+), 106 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml >> > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > Documentation/devicetree/bindings/soc/qcom/qcom,apr.example.dtb:0:0: /example-0/apr/service@3: failed to match any schema with compatible: ['qcom,q6core'] > Documentation/devicetree/bindings/soc/qcom/qcom,apr.example.dtb:0:0: /example-0/apr/service@4: failed to match any schema with compatible: ['qcom,q6afe'] > Documentation/devicetree/bindings/soc/qcom/qcom,apr.example.dtb:0:0: /example-0/apr/service@7: failed to match any schema with compatible: ['qcom,q6asm'] > Documentation/devicetree/bindings/soc/qcom/qcom,apr.example.dtb:0:0: /example-0/apr/service@8: failed to match any schema with compatible: ['qcom,q6adm'] This is expected. I should have mention maybe in commit msg that these compatibles are being removed in this commit and re-added in further commits. Change is therefore not entirely bisectable, but should be easier for review. If desired, I can squash these commits. Best regards, Krzysztof
On 11/11/2022 11:35, Krzysztof Kozlowski wrote: > The APR/GPR nodes are organized like: > > apr-or-gpr-device-node <- qcom,apr.yaml > apr-gpr-service@[0-9] <- qcom,apr.yaml > service-specific-components <- /schemas/sound/qcom,q6*.yaml > > The schema for services (apr-gpr-service@[0-9]) already grows I have not seen these grow or change alteast in the past 9 years. Old APR (Elite f/w) and new GPR (AudioReach) interface provides access to static services on the DSP. > considerably and is still quite not specific. It allows several > incorrect combinations, like adding a clock-controller to a APM device. This should be fixed for sure for validation. We had dedicated bindings per service before. As the service has changed as part of new AudioReach Firmware, we could have added new bindings for these services again. But as we are dealing with the same audio hardware and clock resources a new bindings per service did not make sense. Since then we moved all the lpass audio ports and clocks related bindings to qcom,q6dsp-lpass-clocks.yaml and qcom,q6dsp-lpass-ports.yaml. --srini > Restricting it would complicate the schema even more. Bringing new > support for sound on Qualcomm SM8450 and SC8280XP SoC would grow it as > well. > > Simplify the qcom,apr.yaml by splitting the services to a shared file > which will be: > 1. Referenced by qcom,apr.yaml with additionalProperties:true, > 2. Referenced by specific bindings for services with > additionalProperties:false (not yet in this commit). > > While moving the code, add also required 'reg' and > 'qcom,protection-domain' to further constrain the bindings. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > .../bindings/soc/qcom/qcom,apr-services.yaml | 54 +++++++++ > .../bindings/soc/qcom/qcom,apr.yaml | 108 +----------------- > MAINTAINERS | 2 +- > 3 files changed, 58 insertions(+), 106 deletions(-) > create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml > > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml > new file mode 100644 > index 000000000000..290555426c39 > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml > @@ -0,0 +1,54 @@ > +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/soc/qcom/qcom,apr-services.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm APR/GPR services shared parts > + > +maintainers: > + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > + > +description: > + Common parts of a static service in Qualcomm APR/GPR (Asynchronous/Generic > + Packet Router). > + > +properties: > + reg: > + minimum: 1 > + maximum: 13 > + description: | > + APR Service ID > + 3 = DSP Core Service > + 4 = Audio Front End Service. > + 5 = Voice Stream Manager Service. > + 6 = Voice processing manager. > + 7 = Audio Stream Manager Service. > + 8 = Audio Device Manager Service. > + 9 = Multimode voice manager. > + 10 = Core voice stream. > + 11 = Core voice processor. > + 12 = Ultrasound stream manager. > + 13 = Listen stream manager. > + GPR Service ID > + 1 = Audio Process Manager Service > + 2 = Proxy Resource Manager Service. > + 3 = AMDB Service. > + 4 = Voice processing manager. > + > + qcom,protection-domain: > + $ref: /schemas/types.yaml#/definitions/string-array > + description: | > + Protection domain service name and path for APR service > + possible values are:: > + "avs/audio", "msm/adsp/audio_pd". > + "kernel/elf_loader", "msm/modem/wlan_pd". > + "tms/servreg", "msm/adsp/audio_pd". > + "tms/servreg", "msm/modem/wlan_pd". > + "tms/servreg", "msm/slpi/sensor_pd". > + > +required: > + - reg > + - qcom,protection-domain > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml > index 0a7a34cb2497..9302ffe567d6 100644 > --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml > @@ -80,115 +80,13 @@ properties: > '#size-cells': > const: 0 > > -#APR/GPR Services > patternProperties: > "^service@[1-9a-d]$": > type: object > + $ref: /schemas/soc/qcom/qcom,apr-services.yaml > + additionalProperties: true > description: > - APR/GPR node's client devices use subnodes for desired static port services. > - > - properties: > - compatible: > - enum: > - - qcom,q6core > - - qcom,q6asm > - - qcom,q6afe > - - qcom,q6adm > - - qcom,q6apm > - - qcom,q6prm > - > - reg: > - minimum: 1 > - maximum: 13 > - description: > - APR Service ID > - 3 = DSP Core Service > - 4 = Audio Front End Service. > - 5 = Voice Stream Manager Service. > - 6 = Voice processing manager. > - 7 = Audio Stream Manager Service. > - 8 = Audio Device Manager Service. > - 9 = Multimode voice manager. > - 10 = Core voice stream. > - 11 = Core voice processor. > - 12 = Ultrasound stream manager. > - 13 = Listen stream manager. > - GPR Service ID > - 1 = Audio Process Manager Service > - 2 = Proxy Resource Manager Service. > - 3 = AMDB Service. > - 4 = Voice processing manager. > - > - clock-controller: > - $ref: /schemas/sound/qcom,q6dsp-lpass-clocks.yaml# > - description: Qualcomm DSP LPASS clock controller > - unevaluatedProperties: false > - > - dais: > - type: object > - oneOf: > - - $ref: /schemas/sound/qcom,q6apm-dai.yaml# > - - $ref: /schemas/sound/qcom,q6dsp-lpass-ports.yaml# > - - $ref: /schemas/sound/qcom,q6asm-dais.yaml# > - unevaluatedProperties: false > - description: Qualcomm DSP audio ports > - > - routing: > - type: object > - $ref: /schemas/sound/qcom,q6adm-routing.yaml# > - unevaluatedProperties: false > - description: Qualcomm DSP LPASS audio routing > - > - qcom,protection-domain: > - $ref: /schemas/types.yaml#/definitions/string-array > - description: protection domain service name and path for apr service > - possible values are > - "avs/audio", "msm/adsp/audio_pd". > - "kernel/elf_loader", "msm/modem/wlan_pd". > - "tms/servreg", "msm/adsp/audio_pd". > - "tms/servreg", "msm/modem/wlan_pd". > - "tms/servreg", "msm/slpi/sensor_pd". > - > - allOf: > - - if: > - properties: > - compatible: > - enum: > - - qcom,q6afe > - then: > - properties: > - dais: > - properties: > - compatible: > - const: qcom,q6afe-dais > - > - - if: > - properties: > - compatible: > - enum: > - - qcom,q6apm > - then: > - properties: > - dais: > - properties: > - compatible: > - enum: > - - qcom,q6apm-dais > - - qcom,q6apm-lpass-dais > - > - - if: > - properties: > - compatible: > - enum: > - - qcom,q6asm > - then: > - properties: > - dais: > - properties: > - compatible: > - const: qcom,q6asm-dais > - > - additionalProperties: false > + APR/GPR static port services. > > required: > - compatible > diff --git a/MAINTAINERS b/MAINTAINERS > index 3df7b9a3f5ba..804e4a700477 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -16893,7 +16893,7 @@ M: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > M: Banajit Goswami <bgoswami@quicinc.com> > L: alsa-devel@alsa-project.org (moderated for non-subscribers) > S: Supported > -F: Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml > +F: Documentation/devicetree/bindings/soc/qcom/qcom,apr* > F: Documentation/devicetree/bindings/sound/qcom,* > F: drivers/soc/qcom/apr.c > F: include/dt-bindings/sound/qcom,wcd9335.h
On 11/11/2022 17:35, Srinivas Kandagatla wrote: > > > On 11/11/2022 11:35, Krzysztof Kozlowski wrote: >> The APR/GPR nodes are organized like: >> >> apr-or-gpr-device-node <- qcom,apr.yaml >> apr-gpr-service@[0-9] <- qcom,apr.yaml >> service-specific-components <- /schemas/sound/qcom,q6*.yaml >> >> The schema for services (apr-gpr-service@[0-9]) already grows > > I have not seen these grow or change alteast in the past 9 years. You added GPR to services in 2021, so it grew past 9 years. Then it grew in 2022 when I started adding missing pieces - missing compatibles and properties. > > Old APR (Elite f/w) and new GPR (AudioReach) interface provides access > to static services on the DSP. > >> considerably and is still quite not specific. It allows several >> incorrect combinations, like adding a clock-controller to a APM device. > > This should be fixed for sure for validation. This cannot be fixed without making schema over-complicated. It includes six different compatibles. Except few of them - these compatibles represent different devices. > > We had dedicated bindings per service before. Where? > > As the service has changed as part of new AudioReach Firmware, we could > have added new bindings for these services again. But as we are dealing > with the same audio hardware and clock resources a new bindings per > service did not make sense. Since then we moved all the lpass audio > ports and clocks related bindings to qcom,q6dsp-lpass-clocks.yaml and > qcom,q6dsp-lpass-ports.yaml. These are not bindings for services but bindings for their devices. Best regards, Krzysztof
On 11/11/2022 12:35, Krzysztof Kozlowski wrote: > The APR/GPR nodes are organized like: > > apr-or-gpr-device-node <- qcom,apr.yaml > apr-gpr-service@[0-9] <- qcom,apr.yaml > service-specific-components <- /schemas/sound/qcom,q6*.yaml > (...) > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml > index 0a7a34cb2497..9302ffe567d6 100644 > --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml > @@ -80,115 +80,13 @@ properties: > '#size-cells': > const: 0 > > -#APR/GPR Services > patternProperties: > "^service@[1-9a-d]$": > type: object > + $ref: /schemas/soc/qcom/qcom,apr-services.yaml > + additionalProperties: true > description: > - APR/GPR node's client devices use subnodes for desired static port services. > - > - properties: > - compatible: > - enum: > - - qcom,q6core > - - qcom,q6asm > - - qcom,q6afe > - - qcom,q6adm > - - qcom,q6apm > - - qcom,q6prm I think that this piece could stay here. Otherwise we allow any compatible which matches the qcom,apr-services.yaml binding, but that's easy to achieve. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml new file mode 100644 index 000000000000..290555426c39 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,apr-services.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm APR/GPR services shared parts + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Common parts of a static service in Qualcomm APR/GPR (Asynchronous/Generic + Packet Router). + +properties: + reg: + minimum: 1 + maximum: 13 + description: | + APR Service ID + 3 = DSP Core Service + 4 = Audio Front End Service. + 5 = Voice Stream Manager Service. + 6 = Voice processing manager. + 7 = Audio Stream Manager Service. + 8 = Audio Device Manager Service. + 9 = Multimode voice manager. + 10 = Core voice stream. + 11 = Core voice processor. + 12 = Ultrasound stream manager. + 13 = Listen stream manager. + GPR Service ID + 1 = Audio Process Manager Service + 2 = Proxy Resource Manager Service. + 3 = AMDB Service. + 4 = Voice processing manager. + + qcom,protection-domain: + $ref: /schemas/types.yaml#/definitions/string-array + description: | + Protection domain service name and path for APR service + possible values are:: + "avs/audio", "msm/adsp/audio_pd". + "kernel/elf_loader", "msm/modem/wlan_pd". + "tms/servreg", "msm/adsp/audio_pd". + "tms/servreg", "msm/modem/wlan_pd". + "tms/servreg", "msm/slpi/sensor_pd". + +required: + - reg + - qcom,protection-domain + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml index 0a7a34cb2497..9302ffe567d6 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml @@ -80,115 +80,13 @@ properties: '#size-cells': const: 0 -#APR/GPR Services patternProperties: "^service@[1-9a-d]$": type: object + $ref: /schemas/soc/qcom/qcom,apr-services.yaml + additionalProperties: true description: - APR/GPR node's client devices use subnodes for desired static port services. - - properties: - compatible: - enum: - - qcom,q6core - - qcom,q6asm - - qcom,q6afe - - qcom,q6adm - - qcom,q6apm - - qcom,q6prm - - reg: - minimum: 1 - maximum: 13 - description: - APR Service ID - 3 = DSP Core Service - 4 = Audio Front End Service. - 5 = Voice Stream Manager Service. - 6 = Voice processing manager. - 7 = Audio Stream Manager Service. - 8 = Audio Device Manager Service. - 9 = Multimode voice manager. - 10 = Core voice stream. - 11 = Core voice processor. - 12 = Ultrasound stream manager. - 13 = Listen stream manager. - GPR Service ID - 1 = Audio Process Manager Service - 2 = Proxy Resource Manager Service. - 3 = AMDB Service. - 4 = Voice processing manager. - - clock-controller: - $ref: /schemas/sound/qcom,q6dsp-lpass-clocks.yaml# - description: Qualcomm DSP LPASS clock controller - unevaluatedProperties: false - - dais: - type: object - oneOf: - - $ref: /schemas/sound/qcom,q6apm-dai.yaml# - - $ref: /schemas/sound/qcom,q6dsp-lpass-ports.yaml# - - $ref: /schemas/sound/qcom,q6asm-dais.yaml# - unevaluatedProperties: false - description: Qualcomm DSP audio ports - - routing: - type: object - $ref: /schemas/sound/qcom,q6adm-routing.yaml# - unevaluatedProperties: false - description: Qualcomm DSP LPASS audio routing - - qcom,protection-domain: - $ref: /schemas/types.yaml#/definitions/string-array - description: protection domain service name and path for apr service - possible values are - "avs/audio", "msm/adsp/audio_pd". - "kernel/elf_loader", "msm/modem/wlan_pd". - "tms/servreg", "msm/adsp/audio_pd". - "tms/servreg", "msm/modem/wlan_pd". - "tms/servreg", "msm/slpi/sensor_pd". - - allOf: - - if: - properties: - compatible: - enum: - - qcom,q6afe - then: - properties: - dais: - properties: - compatible: - const: qcom,q6afe-dais - - - if: - properties: - compatible: - enum: - - qcom,q6apm - then: - properties: - dais: - properties: - compatible: - enum: - - qcom,q6apm-dais - - qcom,q6apm-lpass-dais - - - if: - properties: - compatible: - enum: - - qcom,q6asm - then: - properties: - dais: - properties: - compatible: - const: qcom,q6asm-dais - - additionalProperties: false + APR/GPR static port services. required: - compatible diff --git a/MAINTAINERS b/MAINTAINERS index 3df7b9a3f5ba..804e4a700477 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16893,7 +16893,7 @@ M: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> M: Banajit Goswami <bgoswami@quicinc.com> L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Supported -F: Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml +F: Documentation/devicetree/bindings/soc/qcom/qcom,apr* F: Documentation/devicetree/bindings/sound/qcom,* F: drivers/soc/qcom/apr.c F: include/dt-bindings/sound/qcom,wcd9335.h
The APR/GPR nodes are organized like: apr-or-gpr-device-node <- qcom,apr.yaml apr-gpr-service@[0-9] <- qcom,apr.yaml service-specific-components <- /schemas/sound/qcom,q6*.yaml The schema for services (apr-gpr-service@[0-9]) already grows considerably and is still quite not specific. It allows several incorrect combinations, like adding a clock-controller to a APM device. Restricting it would complicate the schema even more. Bringing new support for sound on Qualcomm SM8450 and SC8280XP SoC would grow it as well. Simplify the qcom,apr.yaml by splitting the services to a shared file which will be: 1. Referenced by qcom,apr.yaml with additionalProperties:true, 2. Referenced by specific bindings for services with additionalProperties:false (not yet in this commit). While moving the code, add also required 'reg' and 'qcom,protection-domain' to further constrain the bindings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../bindings/soc/qcom/qcom,apr-services.yaml | 54 +++++++++ .../bindings/soc/qcom/qcom,apr.yaml | 108 +----------------- MAINTAINERS | 2 +- 3 files changed, 58 insertions(+), 106 deletions(-) create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml