deleted file mode 100644
@@ -1,108 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/sound/mchp,i2s-mcc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Microchip I2S Multi-Channel Controller
-
-maintainers:
- - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
-
-description:
- The I2SMCC complies with the Inter-IC Sound (I2S) bus specification and
- supports a Time Division Multiplexed (TDM) interface with external
- multi-channel audio codecs. It consists of a receiver, a transmitter and a
- common clock generator that can be enabled separately to provide Adapter,
- Client or Controller modes with receiver and/or transmitter active.
- On later I2SMCC versions (starting with Microchip's SAMA7G5) I2S
- multi-channel is supported by using multiple data pins, output and
- input, without TDM.
-
-properties:
- "#sound-dai-cells":
- const: 0
-
- compatible:
- enum:
- - microchip,sam9x60-i2smcc
- - microchip,sama7g5-i2smcc
-
- reg:
- maxItems: 1
-
- interrupts:
- maxItems: 1
-
- clocks:
- items:
- - description: Peripheral Bus Clock
- - description: Generic Clock (Optional). Should be set mostly when Master
- Mode is required.
- minItems: 1
-
- clock-names:
- items:
- - const: pclk
- - const: gclk
- minItems: 1
-
- dmas:
- items:
- - description: TX DMA Channel
- - description: RX DMA Channel
-
- dma-names:
- items:
- - const: tx
- - const: rx
-
- microchip,tdm-data-pair:
- description:
- Represents the DIN/DOUT pair pins that are used to receive/send
- TDM data. It is optional and it is only needed if the controller
- uses the TDM mode.
- $ref: /schemas/types.yaml#/definitions/uint8
- enum: [0, 1, 2, 3]
- default: 0
-
-if:
- properties:
- compatible:
- const: microchip,sam9x60-i2smcc
-then:
- properties:
- microchip,tdm-data-pair: false
-
-required:
- - "#sound-dai-cells"
- - compatible
- - reg
- - interrupts
- - clocks
- - clock-names
- - dmas
- - dma-names
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/dma/at91.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
-
- i2s@f001c000 {
- #sound-dai-cells = <0>;
- compatible = "microchip,sam9x60-i2smcc";
- reg = <0xf001c000 0x100>;
- interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
- dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
- AT91_XDMAC_DT_PERID(36))>,
- <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
- AT91_XDMAC_DT_PERID(37))>;
- dma-names = "tx", "rx";
- clocks = <&i2s_clk>, <&i2s_gclk>;
- clock-names = "pclk", "gclk";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2s_default>;
- };
similarity index 100%
rename from Documentation/devicetree/bindings/sound/microchip,pdmc.yaml
rename to Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml
similarity index 100%
rename from Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
rename to Documentation/devicetree/bindings/sound/microchip,sama7g5-spdifrx.yaml
similarity index 100%
rename from Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
rename to Documentation/devicetree/bindings/sound/microchip,sama7g5-spdiftx.yaml
Use the following syntax for Microchip ASoC YAML files: vendor,device.yaml Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- .../bindings/sound/mchp,i2s-mcc.yaml | 108 ------------------ ...,pdmc.yaml => microchip,sama7g5-pdmc.yaml} | 0 ...rx.yaml => microchip,sama7g5-spdifrx.yaml} | 0 ...tx.yaml => microchip,sama7g5-spdiftx.yaml} | 0 4 files changed, 108 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml rename Documentation/devicetree/bindings/sound/{microchip,pdmc.yaml => microchip,sama7g5-pdmc.yaml} (100%) rename Documentation/devicetree/bindings/sound/{mchp,spdifrx.yaml => microchip,sama7g5-spdifrx.yaml} (100%) rename Documentation/devicetree/bindings/sound/{mchp,spdiftx.yaml => microchip,sama7g5-spdiftx.yaml} (100%)