| Message ID | 20230126031424.14582-22-quic_wcheng@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Introduce QC USB SND audio offloading support | expand |
On 26/01/2023 04:14, Wesley Cheng wrote: > Add a dt-binding to describe the definition of enabling the Q6 USB backend > device for audio offloading. The node carries information, which is passed > along to the QC USB SND class driver counterpart. These parameters will be > utilized during QMI stream enable requests. Subject: drop second/last, redundant "bindings". The "dt-bindings" prefix is already stating that these are bindings. > > Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> > --- > .../bindings/sound/qcom,q6usb-dais.yaml | 55 +++++++++++++++++++ > 1 file changed, 55 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml > > diff --git a/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml > new file mode 100644 > index 000000000000..e24b4d52fa7e > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml > @@ -0,0 +1,55 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/qcom,q6usb-dais.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm ASoC USB backend DAI > + > +maintainers: > + - Wesley Cheng <quic_wcheng@quicinc.com> > + > +description: > + The Q6USB backend is a supported AFE port on the Q6DSP. This backend > + driver will communicate the required settings to the QC USB SND class > + driver for properly enabling the audio stream. Parameters defined > + under this node will carry settings, which will be passed along during > + the QMI stream enable request. > + > +properties: > + compatible: > + enum: > + - qcom,q6usb-dais > + > + iommus: > + maxItems: 1 > + > + "#sound-dai-cells": > + const: 1 > + > + qcom,usb-audio-stream-id: > + description: > + SID for the Q6DSP processor for IOMMU mapping. > + $ref: /schemas/types.yaml#/definitions/uint32 > + > + qcom,usb-audio-intr-num: > + description: > + Desired XHCI interrupter number to use. > + $ref: /schemas/types.yaml#/definitions/uint32 > + > +required: > + - compatible > + - '#sound-dai-cells' Use consistent quotes - either " or ' > + - qcom,usb-audio-intr-num > + > +additionalProperties: false > + > +examples: > + - | > + usbdai: usbd { Generic node name, so: dais Drop also label, not needed/used in example. > + compatible = "qcom,q6usb-dais"; > + #sound-dai-cells = <1>; > + iommus = <&apps_smmu 0x180f 0x0>; > + qcom,usb-audio-stream-id = <0xf>; > + qcom,usb-audio-intr-num = <2>; > + }; Best regards, Krzysztof
On 26/01/2023 03:14, Wesley Cheng wrote: > Add a dt-binding to describe the definition of enabling the Q6 USB backend > device for audio offloading. The node carries information, which is passed > along to the QC USB SND class driver counterpart. These parameters will be > utilized during QMI stream enable requests. > > Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> > --- > .../bindings/sound/qcom,q6usb-dais.yaml | 55 +++++++++++++++++++ > 1 file changed, 55 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml > > diff --git a/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml > new file mode 100644 > index 000000000000..e24b4d52fa7e > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml > @@ -0,0 +1,55 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/qcom,q6usb-dais.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm ASoC USB backend DAI > + > +maintainers: > + - Wesley Cheng <quic_wcheng@quicinc.com> > + > +description: > + The Q6USB backend is a supported AFE port on the Q6DSP. This backend > + driver will communicate the required settings to the QC USB SND class > + driver for properly enabling the audio stream. Parameters defined > + under this node will carry settings, which will be passed along during > + the QMI stream enable request. > + > +properties: > + compatible: > + enum: > + - qcom,q6usb-dais > + > + iommus: > + maxItems: 1 > + > + "#sound-dai-cells": > + const: 1 > + > + qcom,usb-audio-stream-id: > + description: > + SID for the Q6DSP processor for IOMMU mapping. > + $ref: /schemas/types.yaml#/definitions/uint32 We could derive this directly from iommus property as we do it like q6asm-dai.c --srini > + > + qcom,usb-audio-intr-num: > + description: > + Desired XHCI interrupter number to use. > + $ref: /schemas/types.yaml#/definitions/uint32 > + > +required: > + - compatible > + - '#sound-dai-cells' > + - qcom,usb-audio-intr-num > + > +additionalProperties: false > + > +examples: > + - | > + usbdai: usbd { > + compatible = "qcom,q6usb-dais"; > + #sound-dai-cells = <1>; > + iommus = <&apps_smmu 0x180f 0x0>; > + qcom,usb-audio-stream-id = <0xf>; > + qcom,usb-audio-intr-num = <2>; > + };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml new file mode 100644 index 000000000000..e24b4d52fa7e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,q6usb-dais.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm ASoC USB backend DAI + +maintainers: + - Wesley Cheng <quic_wcheng@quicinc.com> + +description: + The Q6USB backend is a supported AFE port on the Q6DSP. This backend + driver will communicate the required settings to the QC USB SND class + driver for properly enabling the audio stream. Parameters defined + under this node will carry settings, which will be passed along during + the QMI stream enable request. + +properties: + compatible: + enum: + - qcom,q6usb-dais + + iommus: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + qcom,usb-audio-stream-id: + description: + SID for the Q6DSP processor for IOMMU mapping. + $ref: /schemas/types.yaml#/definitions/uint32 + + qcom,usb-audio-intr-num: + description: + Desired XHCI interrupter number to use. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - '#sound-dai-cells' + - qcom,usb-audio-intr-num + +additionalProperties: false + +examples: + - | + usbdai: usbd { + compatible = "qcom,q6usb-dais"; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x180f 0x0>; + qcom,usb-audio-stream-id = <0xf>; + qcom,usb-audio-intr-num = <2>; + };
Add a dt-binding to describe the definition of enabling the Q6 USB backend device for audio offloading. The node carries information, which is passed along to the QC USB SND class driver counterpart. These parameters will be utilized during QMI stream enable requests. Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> --- .../bindings/sound/qcom,q6usb-dais.yaml | 55 +++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml