From patchwork Tue May 9 16:38:28 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Martin_Povi=C5=A1er?= X-Patchwork-Id: 13235955 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 30878C77B75 for ; Tue, 9 May 2023 16:41:07 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id 1DBB610B6; Tue, 9 May 2023 18:40:14 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz 1DBB610B6 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1683650464; bh=QKXC51sVfIJBS6ax6eXTfjWFM4TJKoPsJbULSJpNEyI=; h=From:To:Subject:Date:In-Reply-To:References:CC:List-Id: List-Archive:List-Help:List-Owner:List-Post:List-Subscribe: List-Unsubscribe:From; b=ust916YByUHXPztzE5x1JFF2RBOJ7ir1u+jXIMoljunLdghPQ9wM0vqEzZclug2u1 Av7ZLh1BjPjyaiu7721X9Fo3bkXxPTUrNK+xp99BCMe7kPW8BMw64Duusw+JwXDcQN KTBbSsRIBvk63dloRRSWFtlw9glgo02PysEwXDvk= Received: from mailman-core.alsa-project.org (mailman-core.alsa-project.org [10.254.200.10]) by alsa1.perex.cz (Postfix) with ESMTP id 4DE97F8053D; Tue, 9 May 2023 18:39:32 +0200 (CEST) Received: by alsa1.perex.cz (Postfix, from userid 50401) id D84D9F8053D; Tue, 9 May 2023 18:39:27 +0200 (CEST) Received: from hutie.ust.cz (unknown [IPv6:2a03:3b40:fe:f0::1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 0E85FF8014C for ; Tue, 9 May 2023 18:39:11 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 0E85FF8014C Authentication-Results: alsa1.perex.cz; dkim=pass (1024-bit key, unprotected) header.d=cutebit.org header.i=@cutebit.org header.a=rsa-sha256 header.s=mail header.b=Iyy1Etgt From: =?utf-8?q?Martin_Povi=C5=A1er?= DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=cutebit.org; s=mail; t=1683650349; bh=eGud85/h3eSwGCh0iG3yWoR+nfpaGjBgEpdObFXqDHQ=; h=From:To:Cc:Subject:Date:In-Reply-To:References; b=Iyy1EtgtAoQIkr9NCu401Casgz/FG/fYmL0P8KLrc9WJrSAjFz83DmobRs7fK4cSj RcgF0WTE+eHLVCKYnlByrmq1NOK/Lv3o+dFeTwQDgwDnqRYmYwxuOAhQx9smDfekC9 7o/CR38GPggITriM/LTw5n6tBw/CgHqITNA9+Xy4= To: =?utf-8?q?Martin_Povi=C5=A1er?= , Liam Girdwood , Mark Brown , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Jaroslav Kysela , Takashi Iwai , Lars-Peter Clausen , =?utf-8?q?Nuno_S=C3=A1?= Subject: [PATCH 2/2] ASoC: ssm3515: Add new amp driver Date: Tue, 9 May 2023 18:38:28 +0200 Message-Id: <20230509163828.86003-2-povik+lin@cutebit.org> In-Reply-To: <20230509163828.86003-1-povik+lin@cutebit.org> References: <20230509163828.86003-1-povik+lin@cutebit.org> MIME-Version: 1.0 Message-ID-Hash: HBG3EY6QRUMKZME2Q5PDPURXPJESYZEM X-Message-ID-Hash: HBG3EY6QRUMKZME2Q5PDPURXPJESYZEM X-MailFrom: povik+lin@cutebit.org X-Mailman-Rule-Misses: dmarc-mitigation; no-senders; approved; emergency; loop; banned-address; member-moderation; header-match-alsa-devel.alsa-project.org-0; header-match-alsa-devel.alsa-project.org-1; nonmember-moderation; administrivia; implicit-dest; max-recipients; max-size; news-moderation; no-subject; digests; suspicious-header CC: asahi@lists.linux.dev, alsa-devel@alsa-project.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org X-Mailman-Version: 3.3.8 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" Archived-At: List-Archive: List-Help: List-Owner: List-Post: List-Subscribe: List-Unsubscribe: The Analog Devices' SSM3515 is a mono audio amplifier with digital input, equipped on Apple's 2021 iMacs. Add an ASoC driver for it, and register both the driver code and schema in MAINTAINERS. Signed-off-by: Martin Povišer --- MAINTAINERS | 2 + sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ssm3515.c | 482 +++++++++++++++++++++++++++++++++++++ 4 files changed, 492 insertions(+) create mode 100644 sound/soc/codecs/ssm3515.c diff --git a/MAINTAINERS b/MAINTAINERS index 460f953f331b..78136300b026 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1990,9 +1990,11 @@ M: Martin Povišer L: asahi@lists.linux.dev L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Maintained +F: Documentation/devicetree/bindings/sound/adi,ssm3515.yaml F: Documentation/devicetree/bindings/sound/apple,* F: sound/soc/apple/* F: sound/soc/codecs/cs42l83-i2c.c +F: sound/soc/codecs/ssm3515.c ARM/ARTPEC MACHINE SUPPORT M: Jesper Nilsson diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 8020097d4e4c..d5665c21b6f3 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1652,6 +1652,12 @@ config SND_SOC_SSM2602_I2C select SND_SOC_SSM2602 select REGMAP_I2C +config SND_SOC_SSM3515 + tristate "Analog Devices SSM3515 amplifier driver" + select REGMAP_I2C + depends on I2C + depends on OF + config SND_SOC_SSM4567 tristate "Analog Devices ssm4567 amplifier driver support" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 5cdbae88e6e3..8a35bc01c486 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -256,6 +256,7 @@ snd-soc-ssm2518-objs := ssm2518.o snd-soc-ssm2602-objs := ssm2602.o snd-soc-ssm2602-spi-objs := ssm2602-spi.o snd-soc-ssm2602-i2c-objs := ssm2602-i2c.o +snd-soc-ssm3515-objs := ssm3515.o snd-soc-ssm4567-objs := ssm4567.o snd-soc-sta32x-objs := sta32x.o snd-soc-sta350-objs := sta350.o @@ -623,6 +624,7 @@ obj-$(CONFIG_SND_SOC_SSM2518) += snd-soc-ssm2518.o obj-$(CONFIG_SND_SOC_SSM2602) += snd-soc-ssm2602.o obj-$(CONFIG_SND_SOC_SSM2602_SPI) += snd-soc-ssm2602-spi.o obj-$(CONFIG_SND_SOC_SSM2602_I2C) += snd-soc-ssm2602-i2c.o +obj-$(CONFIG_SND_SOC_SSM3515) += snd-soc-ssm3515.o obj-$(CONFIG_SND_SOC_SSM4567) += snd-soc-ssm4567.o obj-$(CONFIG_SND_SOC_STA32X) += snd-soc-sta32x.o obj-$(CONFIG_SND_SOC_STA350) += snd-soc-sta350.o diff --git a/sound/soc/codecs/ssm3515.c b/sound/soc/codecs/ssm3515.c new file mode 100644 index 000000000000..278b57d029f6 --- /dev/null +++ b/sound/soc/codecs/ssm3515.c @@ -0,0 +1,482 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +// +// Analog Devices' SSM3515 audio amp driver +// +// Copyright (C) The Asahi Linux Contributors + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + + +#define SSM3515_PWR 0x00 +#define SSM3515_PWR_APWDN_EN BIT(7) +#define SSM3515_PWR_BSNS_PWDN BIT(6) +#define SSM3515_PWR_S_RST BIT(1) +#define SSM3515_PWR_SPWDN BIT(0) + +#define SSM3515_GEC 0x01 +#define SSM3515_GEC_EDGE BIT(4) +#define SSM3515_GEC_EDGE_SHIFT 4 +#define SSM3515_GEC_ANA_GAIN GENMASK(1, 0) + +#define SSM3515_DAC 0x02 +#define SSM3515_DAC_HV BIT(7) +#define SSM3515_DAC_MUTE BIT(6) +#define SSM3515_DAC_HPF BIT(5) +#define SSM3515_DAC_LPM BIT(4) +#define SSM3515_DAC_FS GENMASK(2, 0) + +#define SSM3515_DAC_VOL 0x03 + +#define SSM3515_SAI1 0x04 +#define SSM3515_SAI1_DAC_POL BIT(7) +#define SSM3515_SAI1_BCLK_POL BIT(6) +#define SSM3515_SAI1_TDM_BCLKS GENMASK(5, 3) +#define SSM3515_SAI1_FSYNC_MODE BIT(2) +#define SSM3515_SAI1_SDATA_FMT BIT(1) +#define SSM3515_SAI1_SAI_MODE BIT(0) + +#define SSM3515_SAI2 0x05 +#define SSM3515_SAI2_DATA_WIDTH BIT(7) +#define SSM3515_SAI2_AUTO_SLOT BIT(4) +#define SSM3515_SAI2_TDM_SLOT GENMASK(3, 0) + +#define SSM3515_VBAT_OUT 0x06 + +#define SSM3515_STATUS 0x0a +#define SSM3515_STATUS_UVLO_REG BIT(6) +#define SSM3515_STATUS_LIM_EG BIT(5) +#define SSM3515_STATUS_CLIP BIT(4) +#define SSM3515_STATUS_AMP_OC BIT(3) +#define SSM3515_STATUS_OTF BIT(2) +#define SSM3515_STATUS_OTW BIT(1) +#define SSM3515_STATUS_BAT_WARN BIT(0) + +static bool ssm3515_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case SSM3515_STATUS: + case SSM3515_VBAT_OUT: + return true; + + default: + return false; + } +} + +static const struct reg_default ssm3515_reg_defaults[] = { + { SSM3515_PWR, 0x81 }, + { SSM3515_GEC, 0x01 }, + { SSM3515_DAC, 0x32 }, + { SSM3515_DAC_VOL, 0x40 }, + { SSM3515_SAI1, 0x11 }, + { SSM3515_SAI2, 0x00 }, +}; + +static const struct regmap_config ssm3515_i2c_regmap = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = ssm3515_volatile_reg, + .max_register = 0xb, + .reg_defaults = ssm3515_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(ssm3515_reg_defaults), + .cache_type = REGCACHE_FLAT, +}; + +struct ssm3515_data { + struct device *dev; + struct regmap *regmap; + u32 ana_gain; +}; + +// The specced range is -71.25...24.00 dB with step size of 0.375 dB, +// and a mute item below that. This is represented by -71.62...24.00 dB +// with the mute item mapped onto the low end. +static DECLARE_TLV_DB_MINMAX_MUTE(ssm3515_dac_volume, -7162, 2400); + +static const struct snd_kcontrol_new ssm3515_snd_controls[] = { + SOC_SINGLE_TLV("DAC Playback Volume", SSM3515_DAC_VOL, + 0, 255, 1, ssm3515_dac_volume), + SOC_SINGLE("Low EMI Mode Switch", SSM3515_GEC, + __bf_shf(SSM3515_GEC_EDGE), 1, 0), + SOC_SINGLE("Soft Volume Ramping Switch", SSM3515_DAC, + __bf_shf(SSM3515_DAC_HV), 1, 1), + SOC_SINGLE("HPF Switch", SSM3515_DAC, + __bf_shf(SSM3515_DAC_HPF), 1, 0), + SOC_SINGLE("DAC Invert Switch", SSM3515_SAI1, + __bf_shf(SSM3515_SAI1_DAC_POL), 1, 0), +}; + +static void ssm3515_read_faults(struct snd_soc_component *component) +{ + int ret; + + ret = snd_soc_component_read(component, SSM3515_STATUS); + if (ret <= 0) { + /* + * If the read was erroneous, ASoC core has printed a message, + * and that's all that's appropriate in handling the error here. + */ + return; + } + + dev_err(component->dev, "device reports:%s%s%s%s%s%s%s\n", + FIELD_GET(SSM3515_STATUS_UVLO_REG, ret) ? " voltage regulator fault" : "", + FIELD_GET(SSM3515_STATUS_LIM_EG, ret) ? " limiter engaged" : "", + FIELD_GET(SSM3515_STATUS_CLIP, ret) ? " clipping detected" : "", + FIELD_GET(SSM3515_STATUS_AMP_OC, ret) ? " amp over-current fault" : "", + FIELD_GET(SSM3515_STATUS_OTF, ret) ? " overtemperature fault" : "", + FIELD_GET(SSM3515_STATUS_OTW, ret) ? " overtemperature warning" : "", + FIELD_GET(SSM3515_STATUS_BAT_WARN, ret) ? " bat voltage low warning" : ""); +} + +static int ssm3515_reset(struct snd_soc_component *component) +{ + int ret; + + ret = snd_soc_component_update_bits(component, SSM3515_PWR, + SSM3515_PWR_S_RST, SSM3515_PWR_S_RST); + + if (ret < 0) + return ret; + return 0; +} + +static int ssm3515_setup(struct snd_soc_component *component) +{ + struct ssm3515_data *data = + snd_soc_component_get_drvdata(component); + int ret; + + ret = snd_soc_component_update_bits(component, SSM3515_GEC, + SSM3515_GEC_ANA_GAIN, + FIELD_PREP(SSM3515_GEC_ANA_GAIN, data->ana_gain)); + if (ret < 0) + return ret; + + /* Start out muted */ + ret = snd_soc_component_update_bits(component, SSM3515_DAC, + SSM3515_DAC_MUTE, SSM3515_DAC_MUTE); + if (ret < 0) + return ret; + + /* Disable the 'master power-down' */ + ret = snd_soc_component_update_bits(component, SSM3515_PWR, + SSM3515_PWR_SPWDN, 0); + if (ret < 0) + return ret; + + return 0; +} + +static int ssm3515_probe(struct snd_soc_component *component) +{ + struct ssm3515_data *data = + snd_soc_component_get_drvdata(component); + int ret; + + ret = ssm3515_reset(component); + if (ret < 0) + return ret; + regmap_reinit_cache(data->regmap, &ssm3515_i2c_regmap); + + return ssm3515_setup(component); +} + +static int ssm3515_mute(struct snd_soc_dai *dai, int mute, int direction) +{ + int ret; + + ret = snd_soc_component_update_bits(dai->component, + SSM3515_DAC, + SSM3515_DAC_MUTE, + FIELD_PREP(SSM3515_DAC_MUTE, mute)); + if (ret < 0) + return ret; + return 0; +} + +static int ssm3515_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + int ret, rateval; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16: + case SNDRV_PCM_FORMAT_S24: + ret = snd_soc_component_update_bits(component, + SSM3515_SAI2, SSM3515_SAI2_DATA_WIDTH, + FIELD_PREP(SSM3515_SAI2_DATA_WIDTH, + params_width(params) == 16)); + if (ret < 0) + return ret; + break; + + default: + return -EINVAL; + } + + switch (params_rate(params)) { + case 8000 ... 12000: + rateval = 0; + break; + case 16000 ... 24000: + rateval = 1; + break; + case 32000 ... 48000: + rateval = 2; + break; + case 64000 ... 96000: + rateval = 3; + break; + case 128000 ... 192000: + rateval = 4; + break; + case 48001 ... 63999: /* this is ...72000 but overlaps */ + rateval = 5; + break; + default: + return -EINVAL; + } + + ret = snd_soc_component_update_bits(component, + SSM3515_DAC, SSM3515_DAC_FS, + FIELD_PREP(SSM3515_DAC_FS, rateval)); + if (ret < 0) + return ret; + + return 0; +} + +static int ssm3515_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + bool fpol_inv = false; /* non-inverted: frame starts with low-to-high FSYNC */ + int ret; + u8 sai1 = 0; + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_IB_NF: + case SND_SOC_DAIFMT_IB_IF: + sai1 |= SSM3515_SAI1_BCLK_POL; + break; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + fpol_inv = 1; + sai1 &= ~SSM3515_SAI1_SDATA_FMT; /* 1 bit start delay */ + break; + case SND_SOC_DAIFMT_LEFT_J: + fpol_inv = 0; + sai1 |= SSM3515_SAI1_SDATA_FMT; /* no start delay */ + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_IF: + case SND_SOC_DAIFMT_IB_IF: + fpol_inv ^= 1; + break; + } + + /* Set the serial input to 'TDM mode' */ + sai1 |= SSM3515_SAI1_SAI_MODE; + + if (fpol_inv) { + /* + * We configure the codec in a 'TDM mode', in which the + * FSYNC_MODE bit of SAI1 is supposed to select between + * what the datasheet calls 'Pulsed FSYNC mode' and '50% + * FSYNC mode'. + * + * Experiments suggest that this bit in fact simply selects + * the FSYNC polarity, so go with that. + */ + sai1 |= SSM3515_SAI1_FSYNC_MODE; + } + + ret = snd_soc_component_update_bits(component, SSM3515_SAI1, + SSM3515_SAI1_BCLK_POL | SSM3515_SAI1_SDATA_FMT | + SSM3515_SAI1_SAI_MODE | SSM3515_SAI1_FSYNC_MODE, sai1); + + if (ret < 0) + return ret; + return 0; +} + +static int ssm3515_set_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, + unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + int slot, tdm_bclks_val, ret; + + if (tx_mask == 0 || rx_mask != 0) + return -EINVAL; + + slot = __ffs(tx_mask); + + if (tx_mask & ~BIT(slot)) + return -EINVAL; + + switch (slot_width) { + case 16: + tdm_bclks_val = 0; + break; + case 24: + tdm_bclks_val = 1; + break; + case 32: + tdm_bclks_val = 2; + break; + case 48: + tdm_bclks_val = 3; + break; + case 64: + tdm_bclks_val = 4; + break; + default: + return -EINVAL; + } + + ret = snd_soc_component_update_bits(component, SSM3515_SAI1, + SSM3515_SAI1_TDM_BCLKS, + FIELD_PREP(SSM3515_SAI1_TDM_BCLKS, tdm_bclks_val)); + if (ret < 0) + return ret; + + ret = snd_soc_component_update_bits(component, SSM3515_SAI2, + SSM3515_SAI2_TDM_SLOT, + FIELD_PREP(SSM3515_SAI2_TDM_SLOT, slot)); + if (ret < 0) + return ret; + + return 0; +} + +static int ssm3515_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + /* + * We don't get live notification of faults, so at least at + * this time, when playback is over, check if we have tripped + * over anything and if so, log it. + */ + ssm3515_read_faults(dai->component); + return 0; +} + +static const struct snd_soc_dai_ops ssm3515_dai_ops = { + .mute_stream = ssm3515_mute, + .hw_params = ssm3515_hw_params, + .set_fmt = ssm3515_set_fmt, + .set_tdm_slot = ssm3515_set_tdm_slot, + .hw_free = ssm3515_hw_free, +}; + +static struct snd_soc_dai_driver ssm3515_dai_driver = { + .name = "SSM3515 SAI", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 1, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE, + }, + .ops = &ssm3515_dai_ops, +}; + +static const struct snd_soc_dapm_widget ssm3515_dapm_widgets[] = { + SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_OUTPUT("OUT"), +}; + +static const struct snd_soc_dapm_route ssm3515_dapm_routes[] = { + {"OUT", NULL, "DAC"}, + {"DAC", NULL, "Playback"}, +}; + +static const struct snd_soc_component_driver ssm3515_asoc_component = { + .probe = ssm3515_probe, + .controls = ssm3515_snd_controls, + .num_controls = ARRAY_SIZE(ssm3515_snd_controls), + .dapm_widgets = ssm3515_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(ssm3515_dapm_widgets), + .dapm_routes = ssm3515_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(ssm3515_dapm_routes), + .endianness = 1, +}; + +static int ssm3515_parse_dt(struct ssm3515_data *data) +{ + int ret; + + ret = of_property_read_u32(data->dev->of_node, "adi,ana-gain", + &data->ana_gain); + if (ret) + return dev_err_probe(data->dev, -EINVAL, "missing adi,ana-gain property\n"); + + return 0; +} + +static int ssm3515_i2c_probe(struct i2c_client *client) +{ + struct ssm3515_data *data; + int ret; + + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->dev = &client->dev; + i2c_set_clientdata(client, data); + + data->regmap = devm_regmap_init_i2c(client, &ssm3515_i2c_regmap); + if (IS_ERR(data->regmap)) + return dev_err_probe(data->dev, PTR_ERR(data->regmap), + "initializing register map"); + + ret = ssm3515_parse_dt(data); + if (ret < 0) + return ret; + + return devm_snd_soc_register_component(data->dev, + &ssm3515_asoc_component, + &ssm3515_dai_driver, 1); +} + +static const struct of_device_id ssm3515_of_match[] = { + { .compatible = "adi,ssm3515" }, + {} +}; +MODULE_DEVICE_TABLE(of, ssm3515_of_match); + +static struct i2c_driver ssm3515_i2c_driver = { + .driver = { + .name = "ssm3515", + .of_match_table = of_match_ptr(ssm3515_of_match), + }, + .probe_new = ssm3515_i2c_probe, +}; +module_i2c_driver(ssm3515_i2c_driver); + +MODULE_AUTHOR("Martin Povišer "); +MODULE_DESCRIPTION("ASoC SSM3515 audio amp driver"); +MODULE_LICENSE("Dual MIT/GPL");