diff mbox series

[4/4] soundwire: intel_auxdevice: use SDW_DEV_NUM_ALLOC_IDA_WAKE_ONLY

Message ID 20230531033736.792464-5-yung-chuan.liao@linux.intel.com (mailing list archive)
State New, archived
Headers show
Series soundwire: allow for more than 8 devices, keep IDA for wake-capable devices | expand

Commit Message

Bard Liao May 31, 2023, 3:37 a.m. UTC
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

Change the allocation strategy on Intel platforms to use Device Numbers

[1..5]: unconstrained allocation with bus-specific Device Numbers,
typically for amplifiers.

[6..11]: IDA-based system-unique Device Number to be used for
wake-capable devices such as jack codecs or microphone codecs.

These values were chosen based on the typical maximum number of
devices per link given electrical/PHY limitations. This configuration
will e.g. allow for 8 amplifiers on 2 links, and additional devices on
the remaining links.

Example on Dell SDCA device with jack codec, two amplifiers and one
microphone codec: only the jack codec relies on the IDA, others use
the same Device Number 1 on separate links.

rt711-sdca sdw:0:025d:0711:01: signaling enumeration completion for Slave 6
rt1316-sdca sdw:1:025d:1316:01: signaling enumeration completion for Slave 1
rt1316-sdca sdw:2:025d:1316:01: signaling enumeration completion for Slave 1
rt715-sdca sdw:3:025d:0714:01: signaling enumeration completion for Slave 1

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
 drivers/soundwire/intel_auxdevice.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/soundwire/intel_auxdevice.c b/drivers/soundwire/intel_auxdevice.c
index c1df6f014e6b..917edc75ddfb 100644
--- a/drivers/soundwire/intel_auxdevice.c
+++ b/drivers/soundwire/intel_auxdevice.c
@@ -23,8 +23,12 @@ 
 #include "intel.h"
 #include "intel_auxdevice.h"
 
-/* IDA min selected to avoid conflicts with HDaudio/iDISP SDI values */
-#define INTEL_DEV_NUM_IDA_MIN           4
+/*
+ * IDA min selected to allow for 5 unconstrained devices per link,
+ * and 6 system-unique Device Numbers for wake-capable devices.
+ */
+
+#define INTEL_DEV_NUM_IDA_MIN           6
 
 #define INTEL_MASTER_SUSPEND_DELAY_MS	3000
 
@@ -66,9 +70,20 @@  static void generic_new_peripheral_assigned(struct sdw_bus *bus,
 {
 	struct sdw_cdns *cdns = bus_to_cdns(bus);
 	struct sdw_intel *sdw = cdns_to_intel(cdns);
+	int min_dev = 1;
+	int max_dev = SDW_MAX_DEVICES;
+
+	if (bus->dev_num_alloc == SDW_DEV_NUM_ALLOC_IDA) {
+		min_dev = INTEL_DEV_NUM_IDA_MIN;
+	} else if (bus->dev_num_alloc == SDW_DEV_NUM_ALLOC_IDA_WAKE_ONLY) {
+		if (slave->prop.wake_capable)
+			min_dev = INTEL_DEV_NUM_IDA_MIN;
+		else
+			max_dev = INTEL_DEV_NUM_IDA_MIN - 1;
+	}
 
 	/* paranoia check, this should never happen */
-	if (dev_num < INTEL_DEV_NUM_IDA_MIN || dev_num > SDW_MAX_DEVICES)  {
+	if (dev_num < min_dev || dev_num > max_dev)  {
 		dev_err(bus->dev, "%s: invalid dev_num %d\n", __func__, dev_num);
 		return;
 	}
@@ -167,7 +182,7 @@  static int intel_link_probe(struct auxiliary_device *auxdev,
 	cdns->msg_count = 0;
 
 	bus->link_id = auxdev->id;
-	bus->dev_num_alloc = SDW_DEV_NUM_ALLOC_IDA;
+	bus->dev_num_alloc = SDW_DEV_NUM_ALLOC_IDA_WAKE_ONLY;
 	bus->dev_num_ida_min = INTEL_DEV_NUM_IDA_MIN;
 	bus->clk_stop_timeout = 1;