@@ -58,8 +58,6 @@ static const struct reg_sequence cs35l41_hda_config[] = {
{ CS35L41_DSP1_RX3_SRC, 0x00000018 }, // DSP1RX3 SRC = VMON
{ CS35L41_DSP1_RX4_SRC, 0x00000019 }, // DSP1RX4 SRC = IMON
{ CS35L41_DSP1_RX5_SRC, 0x00000020 }, // DSP1RX5 SRC = ERRVOL
- { CS35L41_AMP_DIG_VOL_CTRL, 0x00008000 }, // AMP_HPF_PCM_EN = 1, AMP_VOL_PCM 0.0 dB
- { CS35L41_AMP_GAIN_CTRL, 0x00000084 }, // AMP_GAIN_PCM 4.5 dB
};
static const struct reg_sequence cs35l41_hda_config_dsp[] = {
@@ -82,6 +80,14 @@ static const struct reg_sequence cs35l41_hda_config_dsp[] = {
{ CS35L41_DSP1_RX3_SRC, 0x00000018 }, // DSP1RX3 SRC = VMON
{ CS35L41_DSP1_RX4_SRC, 0x00000019 }, // DSP1RX4 SRC = IMON
{ CS35L41_DSP1_RX5_SRC, 0x00000029 }, // DSP1RX5 SRC = VBSTMON
+};
+
+static const struct reg_sequence cs35l41_hda_unmute[] = {
+ { CS35L41_AMP_DIG_VOL_CTRL, 0x00008000 }, // AMP_HPF_PCM_EN = 1, AMP_VOL_PCM 0.0 dB
+ { CS35L41_AMP_GAIN_CTRL, 0x00000084 }, // AMP_GAIN_PCM 4.5 dB
+};
+
+static const struct reg_sequence cs35l41_hda_unmute_dsp[] = {
{ CS35L41_AMP_DIG_VOL_CTRL, 0x00008000 }, // AMP_HPF_PCM_EN = 1, AMP_VOL_PCM 0.0 dB
{ CS35L41_AMP_GAIN_CTRL, 0x00000233 }, // AMP_GAIN_PCM = 17.5dB AMP_GAIN_PDM = 19.5dB
};
@@ -522,6 +528,13 @@ static void cs35l41_hda_play_done(struct device *dev)
cs35l41_global_enable(dev, reg, cs35l41->hw_cfg.bst_type, 1, NULL,
cs35l41->firmware_running);
+ if (cs35l41->firmware_running) {
+ regmap_multi_reg_write(reg, cs35l41_hda_unmute_dsp,
+ ARRAY_SIZE(cs35l41_hda_unmute_dsp));
+ } else {
+ regmap_multi_reg_write(reg, cs35l41_hda_unmute,
+ ARRAY_SIZE(cs35l41_hda_unmute));
+ }
}
static void cs35l41_hda_pause_start(struct device *dev)
@@ -1616,6 +1629,11 @@ int cs35l41_hda_probe(struct device *dev, const char *device_name, int id, int i
if (ret)
goto err;
+ ret = regmap_multi_reg_write(cs35l41->regmap, cs35l41_hda_mute,
+ ARRAY_SIZE(cs35l41_hda_mute));
+ if (ret)
+ goto err;
+
INIT_WORK(&cs35l41->fw_load_work, cs35l41_fw_load_work);
mutex_init(&cs35l41->fw_mutex);
Currently we only mute after playback has finished, and unmute prior to setting global enable. To prevent any possible pops and clicks, mute at probe, and then only unmute after global enable is set. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> --- sound/pci/hda/cs35l41_hda.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-)