| Message ID | 20230829210657.9904-11-quic_wcheng@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Introduce QC USB SND audio offloading support | expand |
On 8/29/2023 11:06 PM, Wesley Cheng wrote: > Create a USB BE component that will register a new USB port to the ASoC USB > framework. This will handle determination on if the requested audio > profile is supported by the USB device currently selected. > > Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> > --- > include/sound/q6usboffload.h | 20 ++++ > sound/soc/qcom/Kconfig | 4 + > sound/soc/qcom/qdsp6/Makefile | 1 + > sound/soc/qcom/qdsp6/q6usb.c | 200 ++++++++++++++++++++++++++++++++++ > 4 files changed, 225 insertions(+) > create mode 100644 include/sound/q6usboffload.h > create mode 100644 sound/soc/qcom/qdsp6/q6usb.c > > diff --git a/include/sound/q6usboffload.h b/include/sound/q6usboffload.h > new file mode 100644 > index 000000000000..4fb1912d9f55 > --- /dev/null > +++ b/include/sound/q6usboffload.h > @@ -0,0 +1,20 @@ > +/* SPDX-License-Identifier: GPL-2.0 > + * > + * linux/sound/q6usboffload.h -- QDSP6 USB offload > + * > + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/** > + * struct q6usb_offload > + * @dev - dev handle to usb be > + * @sid - streamID for iommu > + * @intr_num - usb interrupter number > + * @domain - allocated iommu domain > + **/ > +struct q6usb_offload { > + struct device *dev; > + long long sid; > + u32 intr_num; > + struct iommu_domain *domain; > +}; > diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig > index e7b00d1d9e99..bb285af6bb04 100644 > --- a/sound/soc/qcom/Kconfig > +++ b/sound/soc/qcom/Kconfig > @@ -114,6 +114,9 @@ config SND_SOC_QDSP6_APM > config SND_SOC_QDSP6_PRM_LPASS_CLOCKS > tristate > > +config SND_SOC_QDSP6_USB > + tristate > + > config SND_SOC_QDSP6_PRM > tristate > select SND_SOC_QDSP6_PRM_LPASS_CLOCKS > @@ -134,6 +137,7 @@ config SND_SOC_QDSP6 > select SND_SOC_TOPOLOGY > select SND_SOC_QDSP6_APM > select SND_SOC_QDSP6_PRM > + select SND_SOC_QDSP6_USB > help > To add support for MSM QDSP6 Soc Audio. > This will enable sound soc platform specific > diff --git a/sound/soc/qcom/qdsp6/Makefile b/sound/soc/qcom/qdsp6/Makefile > index 3963bf234664..c9457ee898d0 100644 > --- a/sound/soc/qcom/qdsp6/Makefile > +++ b/sound/soc/qcom/qdsp6/Makefile > @@ -17,3 +17,4 @@ obj-$(CONFIG_SND_SOC_QDSP6_APM_DAI) += q6apm-dai.o > obj-$(CONFIG_SND_SOC_QDSP6_APM_LPASS_DAI) += q6apm-lpass-dais.o > obj-$(CONFIG_SND_SOC_QDSP6_PRM) += q6prm.o > obj-$(CONFIG_SND_SOC_QDSP6_PRM_LPASS_CLOCKS) += q6prm-clocks.o > +obj-$(CONFIG_SND_SOC_QDSP6_USB) += q6usb.o > diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c > new file mode 100644 > index 000000000000..88aa0a64201a > --- /dev/null > +++ b/sound/soc/qcom/qdsp6/q6usb.c > @@ -0,0 +1,200 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +#include <linux/err.h> > +#include <linux/init.h> > +#include <linux/module.h> > +#include <linux/device.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > +#include <linux/iommu.h> > +#include <linux/dma-mapping.h> > +#include <linux/dma-map-ops.h> > + > +#include <sound/pcm.h> > +#include <sound/soc.h> > +#include <sound/soc-usb.h> > +#include <sound/pcm_params.h> > +#include <sound/asound.h> > +#include <sound/q6usboffload.h> > + > +#include "q6dsp-lpass-ports.h" > +#include "q6afe.h" > + > +#define SID_MASK 0xF > + > +struct q6usb_port_data { > + struct q6afe_usb_cfg usb_cfg; > + struct snd_soc_usb *usb; > + struct q6usb_offload priv; > + int active_idx; > +}; > + > +static const struct snd_soc_dapm_widget q6usb_dai_widgets[] = { > + SND_SOC_DAPM_HP("USB_RX_BE", NULL), > +}; > + > +static const struct snd_soc_dapm_route q6usb_dapm_routes[] = { > + {"USB Playback", NULL, "USB_RX_BE"}, > +}; > + > +static int q6usb_hw_params(struct snd_pcm_substream *substream, > + struct snd_pcm_hw_params *params, > + struct snd_soc_dai *dai) > +{ > + return 0; > +} Missing new line after closing bracket between function and following struct. > +static const struct snd_soc_dai_ops q6usb_ops = { > + .hw_params = q6usb_hw_params, > +}; > + > +static struct snd_soc_dai_driver q6usb_be_dais[] = { > + { > + .playback = { > + .stream_name = "USB BE RX", > + .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | > + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | > + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | > + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | > + SNDRV_PCM_RATE_192000, > + .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | > + SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE | > + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE | > + SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE, > + .channels_min = 1, > + .channels_max = 2, > + .rate_max = 192000, > + .rate_min = 8000, > + }, > + .id = USB_RX, > + .name = "USB_RX_BE", > + .ops = &q6usb_ops, > + }, > +}; > + > +static int q6usb_audio_ports_of_xlate_dai_name(struct snd_soc_component *component, > + const struct of_phandle_args *args, > + const char **dai_name) > +{ > + int id = args->args[0]; > + int ret = -EINVAL; > + int i; > + > + for (i = 0; i < ARRAY_SIZE(q6usb_be_dais); i++) { Double space after second i. > + if (q6usb_be_dais[i].id == id) { > + *dai_name = q6usb_be_dais[i].name; > + ret = 0; > + break; > + } > + } > + > + return ret; > +} > + > +static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb, > + struct snd_soc_usb_device *sdev, bool connected) > +{ > + struct q6usb_port_data *data; > + > + if (!usb->component) > + return -ENODEV; > + > + data = dev_get_drvdata(usb->component->dev); > + > + if (connected) > + /* We only track the latest USB headset plugged in */ > + data->active_idx = sdev->card_idx; Maybe add brackets around both comment and code? Not sure what guidance there is in such cases, but above code looks weird to me. > + > + return 0; > +} > + > +static int q6usb_component_probe(struct snd_soc_component *component) > +{ > + struct q6usb_port_data *data = dev_get_drvdata(component->dev); > + > + data->usb = snd_soc_usb_add_port(component->dev, &data->priv, q6usb_alsa_connection_cb); > + if (IS_ERR(data->usb)) { > + dev_err(component->dev, "failed to add usb port\n"); > + return -ENODEV; > + } > + > + data->usb->component = component; > + > + return 0; > +} > + > +static void q6usb_component_remove(struct snd_soc_component *component) > +{ > + snd_soc_usb_remove_port(component->dev); > +} > + > +static const struct snd_soc_component_driver q6usb_dai_component = { > + .probe = q6usb_component_probe, > + .remove = q6usb_component_remove, > + .name = "q6usb-dai-component", > + .dapm_widgets = q6usb_dai_widgets, > + .num_dapm_widgets = ARRAY_SIZE(q6usb_dai_widgets), > + .dapm_routes = q6usb_dapm_routes, > + .num_dapm_routes = ARRAY_SIZE(q6usb_dapm_routes), > + .of_xlate_dai_name = q6usb_audio_ports_of_xlate_dai_name, > +}; > + > +static int q6usb_dai_dev_probe(struct platform_device *pdev) > +{ > + struct device_node *node = pdev->dev.of_node; > + struct q6usb_port_data *data; > + struct device *dev = &pdev->dev; > + struct of_phandle_args args; > + int ret; > + > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); > + if (!data) > + return -ENOMEM; > + > + ret = of_property_read_u32(node, "qcom,usb-audio-intr-num", > + &data->priv.intr_num); > + if (ret) { > + dev_err(&pdev->dev, "failed to read intr num.\n"); > + return ret; > + } > + > + ret = of_parse_phandle_with_fixed_args(node, "iommus", 1, 0, &args); > + if (ret < 0) > + data->priv.sid = -1; > + else > + data->priv.sid = args.args[0] & SID_MASK; > + > + data->priv.domain = iommu_get_domain_for_dev(&pdev->dev); > + > + data->priv.dev = dev; > + dev_set_drvdata(dev, data); > + > + return devm_snd_soc_register_component(dev, &q6usb_dai_component, > + q6usb_be_dais, ARRAY_SIZE(q6usb_be_dais)); > +} > + > +static int q6usb_dai_dev_remove(struct platform_device *pdev) > +{ > + return 0; > +} Does platform driver really need empty remove function? Remove it. > + > +static const struct of_device_id q6usb_dai_device_id[] = { > + { .compatible = "qcom,q6usb" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, q6usb_dai_device_id); > + > +static struct platform_driver q6usb_dai_platform_driver = { > + .driver = { > + .name = "q6usb-dai", > + .of_match_table = of_match_ptr(q6usb_dai_device_id), > + }, > + .probe = q6usb_dai_dev_probe, > + .remove = q6usb_dai_dev_remove, > +}; > +module_platform_driver(q6usb_dai_platform_driver); > + > +MODULE_DESCRIPTION("Q6 USB backend dai driver"); > +MODULE_LICENSE("GPL");
Hi, On 8/30/2023 5:50 AM, Amadeusz Sławiński wrote: > On 8/29/2023 11:06 PM, Wesley Cheng wrote: >> Create a USB BE component that will register a new USB port to the >> ASoC USB >> framework. This will handle determination on if the requested audio >> profile is supported by the USB device currently selected. >> >> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> >> --- >> include/sound/q6usboffload.h | 20 ++++ >> sound/soc/qcom/Kconfig | 4 + >> sound/soc/qcom/qdsp6/Makefile | 1 + >> sound/soc/qcom/qdsp6/q6usb.c | 200 ++++++++++++++++++++++++++++++++++ >> 4 files changed, 225 insertions(+) >> create mode 100644 include/sound/q6usboffload.h >> create mode 100644 sound/soc/qcom/qdsp6/q6usb.c >> >> diff --git a/include/sound/q6usboffload.h b/include/sound/q6usboffload.h >> new file mode 100644 >> index 000000000000..4fb1912d9f55 >> --- /dev/null >> +++ b/include/sound/q6usboffload.h >> @@ -0,0 +1,20 @@ >> +/* SPDX-License-Identifier: GPL-2.0 >> + * >> + * linux/sound/q6usboffload.h -- QDSP6 USB offload >> + * >> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All >> rights reserved. >> + */ >> + >> +/** >> + * struct q6usb_offload >> + * @dev - dev handle to usb be >> + * @sid - streamID for iommu >> + * @intr_num - usb interrupter number >> + * @domain - allocated iommu domain >> + **/ >> +struct q6usb_offload { >> + struct device *dev; >> + long long sid; >> + u32 intr_num; >> + struct iommu_domain *domain; >> +}; >> diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig >> index e7b00d1d9e99..bb285af6bb04 100644 >> --- a/sound/soc/qcom/Kconfig >> +++ b/sound/soc/qcom/Kconfig >> @@ -114,6 +114,9 @@ config SND_SOC_QDSP6_APM >> config SND_SOC_QDSP6_PRM_LPASS_CLOCKS >> tristate >> +config SND_SOC_QDSP6_USB >> + tristate >> + >> config SND_SOC_QDSP6_PRM >> tristate >> select SND_SOC_QDSP6_PRM_LPASS_CLOCKS >> @@ -134,6 +137,7 @@ config SND_SOC_QDSP6 >> select SND_SOC_TOPOLOGY >> select SND_SOC_QDSP6_APM >> select SND_SOC_QDSP6_PRM >> + select SND_SOC_QDSP6_USB >> help >> To add support for MSM QDSP6 Soc Audio. >> This will enable sound soc platform specific >> diff --git a/sound/soc/qcom/qdsp6/Makefile >> b/sound/soc/qcom/qdsp6/Makefile >> index 3963bf234664..c9457ee898d0 100644 >> --- a/sound/soc/qcom/qdsp6/Makefile >> +++ b/sound/soc/qcom/qdsp6/Makefile >> @@ -17,3 +17,4 @@ obj-$(CONFIG_SND_SOC_QDSP6_APM_DAI) += q6apm-dai.o >> obj-$(CONFIG_SND_SOC_QDSP6_APM_LPASS_DAI) += q6apm-lpass-dais.o >> obj-$(CONFIG_SND_SOC_QDSP6_PRM) += q6prm.o >> obj-$(CONFIG_SND_SOC_QDSP6_PRM_LPASS_CLOCKS) += q6prm-clocks.o >> +obj-$(CONFIG_SND_SOC_QDSP6_USB) += q6usb.o >> diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c >> new file mode 100644 >> index 000000000000..88aa0a64201a >> --- /dev/null >> +++ b/sound/soc/qcom/qdsp6/q6usb.c >> @@ -0,0 +1,200 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All >> rights reserved. >> + */ >> + >> +#include <linux/err.h> >> +#include <linux/init.h> >> +#include <linux/module.h> >> +#include <linux/device.h> >> +#include <linux/platform_device.h> >> +#include <linux/slab.h> >> +#include <linux/iommu.h> >> +#include <linux/dma-mapping.h> >> +#include <linux/dma-map-ops.h> >> + >> +#include <sound/pcm.h> >> +#include <sound/soc.h> >> +#include <sound/soc-usb.h> >> +#include <sound/pcm_params.h> >> +#include <sound/asound.h> >> +#include <sound/q6usboffload.h> >> + >> +#include "q6dsp-lpass-ports.h" >> +#include "q6afe.h" >> + >> +#define SID_MASK 0xF >> + >> +struct q6usb_port_data { >> + struct q6afe_usb_cfg usb_cfg; >> + struct snd_soc_usb *usb; >> + struct q6usb_offload priv; >> + int active_idx; >> +}; >> + >> +static const struct snd_soc_dapm_widget q6usb_dai_widgets[] = { >> + SND_SOC_DAPM_HP("USB_RX_BE", NULL), >> +}; >> + >> +static const struct snd_soc_dapm_route q6usb_dapm_routes[] = { >> + {"USB Playback", NULL, "USB_RX_BE"}, >> +}; >> + >> +static int q6usb_hw_params(struct snd_pcm_substream *substream, >> + struct snd_pcm_hw_params *params, >> + struct snd_soc_dai *dai) >> +{ >> + return 0; >> +} > > Missing new line after closing bracket between function and following > struct. > Thanks for the review, will fix this. >> +static const struct snd_soc_dai_ops q6usb_ops = { >> + .hw_params = q6usb_hw_params, >> +}; >> + >> +static struct snd_soc_dai_driver q6usb_be_dais[] = { >> + { >> + .playback = { >> + .stream_name = "USB BE RX", >> + .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | >> + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | >> + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | >> + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | >> + SNDRV_PCM_RATE_192000, >> + .formats = SNDRV_PCM_FMTBIT_S16_LE | >> SNDRV_PCM_FMTBIT_S16_BE | >> + SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE | >> + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE | >> + SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE, >> + .channels_min = 1, >> + .channels_max = 2, >> + .rate_max = 192000, >> + .rate_min = 8000, >> + }, >> + .id = USB_RX, >> + .name = "USB_RX_BE", >> + .ops = &q6usb_ops, >> + }, >> +}; >> + >> +static int q6usb_audio_ports_of_xlate_dai_name(struct >> snd_soc_component *component, >> + const struct of_phandle_args *args, >> + const char **dai_name) >> +{ >> + int id = args->args[0]; >> + int ret = -EINVAL; >> + int i; >> + >> + for (i = 0; i < ARRAY_SIZE(q6usb_be_dais); i++) { > > Double space after second i. > Will change. >> + if (q6usb_be_dais[i].id == id) { >> + *dai_name = q6usb_be_dais[i].name; >> + ret = 0; >> + break; >> + } >> + } >> + >> + return ret; >> +} >> + >> +static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb, >> + struct snd_soc_usb_device *sdev, bool connected) >> +{ >> + struct q6usb_port_data *data; >> + >> + if (!usb->component) >> + return -ENODEV; >> + >> + data = dev_get_drvdata(usb->component->dev); >> + >> + if (connected) >> + /* We only track the latest USB headset plugged in */ >> + data->active_idx = sdev->card_idx; > > Maybe add brackets around both comment and code? Not sure what guidance > there is in such cases, but above code looks weird to me. > Sure. >> + >> + return 0; >> +} >> + >> +static int q6usb_component_probe(struct snd_soc_component *component) >> +{ >> + struct q6usb_port_data *data = dev_get_drvdata(component->dev); >> + >> + data->usb = snd_soc_usb_add_port(component->dev, &data->priv, >> q6usb_alsa_connection_cb); >> + if (IS_ERR(data->usb)) { >> + dev_err(component->dev, "failed to add usb port\n"); >> + return -ENODEV; >> + } >> + >> + data->usb->component = component; >> + >> + return 0; >> +} >> + >> +static void q6usb_component_remove(struct snd_soc_component *component) >> +{ >> + snd_soc_usb_remove_port(component->dev); >> +} >> + >> +static const struct snd_soc_component_driver q6usb_dai_component = { >> + .probe = q6usb_component_probe, >> + .remove = q6usb_component_remove, >> + .name = "q6usb-dai-component", >> + .dapm_widgets = q6usb_dai_widgets, >> + .num_dapm_widgets = ARRAY_SIZE(q6usb_dai_widgets), >> + .dapm_routes = q6usb_dapm_routes, >> + .num_dapm_routes = ARRAY_SIZE(q6usb_dapm_routes), >> + .of_xlate_dai_name = q6usb_audio_ports_of_xlate_dai_name, >> +}; >> + >> +static int q6usb_dai_dev_probe(struct platform_device *pdev) >> +{ >> + struct device_node *node = pdev->dev.of_node; >> + struct q6usb_port_data *data; >> + struct device *dev = &pdev->dev; >> + struct of_phandle_args args; >> + int ret; >> + >> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); >> + if (!data) >> + return -ENOMEM; >> + >> + ret = of_property_read_u32(node, "qcom,usb-audio-intr-num", >> + &data->priv.intr_num); >> + if (ret) { >> + dev_err(&pdev->dev, "failed to read intr num.\n"); >> + return ret; >> + } >> + >> + ret = of_parse_phandle_with_fixed_args(node, "iommus", 1, 0, &args); >> + if (ret < 0) >> + data->priv.sid = -1; >> + else >> + data->priv.sid = args.args[0] & SID_MASK; >> + >> + data->priv.domain = iommu_get_domain_for_dev(&pdev->dev); >> + >> + data->priv.dev = dev; >> + dev_set_drvdata(dev, data); >> + >> + return devm_snd_soc_register_component(dev, &q6usb_dai_component, >> + q6usb_be_dais, ARRAY_SIZE(q6usb_be_dais)); >> +} >> + >> +static int q6usb_dai_dev_remove(struct platform_device *pdev) >> +{ >> + return 0; >> +} > > Does platform driver really need empty remove function? Remove it. > Wasn't too sure about this either, so I included it to be consistent. Will remove this and add a small comment on why it isn't required.. Thanks Wesley Cheng
diff --git a/include/sound/q6usboffload.h b/include/sound/q6usboffload.h new file mode 100644 index 000000000000..4fb1912d9f55 --- /dev/null +++ b/include/sound/q6usboffload.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * linux/sound/q6usboffload.h -- QDSP6 USB offload + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/** + * struct q6usb_offload + * @dev - dev handle to usb be + * @sid - streamID for iommu + * @intr_num - usb interrupter number + * @domain - allocated iommu domain + **/ +struct q6usb_offload { + struct device *dev; + long long sid; + u32 intr_num; + struct iommu_domain *domain; +}; diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index e7b00d1d9e99..bb285af6bb04 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -114,6 +114,9 @@ config SND_SOC_QDSP6_APM config SND_SOC_QDSP6_PRM_LPASS_CLOCKS tristate +config SND_SOC_QDSP6_USB + tristate + config SND_SOC_QDSP6_PRM tristate select SND_SOC_QDSP6_PRM_LPASS_CLOCKS @@ -134,6 +137,7 @@ config SND_SOC_QDSP6 select SND_SOC_TOPOLOGY select SND_SOC_QDSP6_APM select SND_SOC_QDSP6_PRM + select SND_SOC_QDSP6_USB help To add support for MSM QDSP6 Soc Audio. This will enable sound soc platform specific diff --git a/sound/soc/qcom/qdsp6/Makefile b/sound/soc/qcom/qdsp6/Makefile index 3963bf234664..c9457ee898d0 100644 --- a/sound/soc/qcom/qdsp6/Makefile +++ b/sound/soc/qcom/qdsp6/Makefile @@ -17,3 +17,4 @@ obj-$(CONFIG_SND_SOC_QDSP6_APM_DAI) += q6apm-dai.o obj-$(CONFIG_SND_SOC_QDSP6_APM_LPASS_DAI) += q6apm-lpass-dais.o obj-$(CONFIG_SND_SOC_QDSP6_PRM) += q6prm.o obj-$(CONFIG_SND_SOC_QDSP6_PRM_LPASS_CLOCKS) += q6prm-clocks.o +obj-$(CONFIG_SND_SOC_QDSP6_USB) += q6usb.o diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c new file mode 100644 index 000000000000..88aa0a64201a --- /dev/null +++ b/sound/soc/qcom/qdsp6/q6usb.c @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/iommu.h> +#include <linux/dma-mapping.h> +#include <linux/dma-map-ops.h> + +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-usb.h> +#include <sound/pcm_params.h> +#include <sound/asound.h> +#include <sound/q6usboffload.h> + +#include "q6dsp-lpass-ports.h" +#include "q6afe.h" + +#define SID_MASK 0xF + +struct q6usb_port_data { + struct q6afe_usb_cfg usb_cfg; + struct snd_soc_usb *usb; + struct q6usb_offload priv; + int active_idx; +}; + +static const struct snd_soc_dapm_widget q6usb_dai_widgets[] = { + SND_SOC_DAPM_HP("USB_RX_BE", NULL), +}; + +static const struct snd_soc_dapm_route q6usb_dapm_routes[] = { + {"USB Playback", NULL, "USB_RX_BE"}, +}; + +static int q6usb_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + return 0; +} +static const struct snd_soc_dai_ops q6usb_ops = { + .hw_params = q6usb_hw_params, +}; + +static struct snd_soc_dai_driver q6usb_be_dais[] = { + { + .playback = { + .stream_name = "USB BE RX", + .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | + SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE | + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE | + SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE, + .channels_min = 1, + .channels_max = 2, + .rate_max = 192000, + .rate_min = 8000, + }, + .id = USB_RX, + .name = "USB_RX_BE", + .ops = &q6usb_ops, + }, +}; + +static int q6usb_audio_ports_of_xlate_dai_name(struct snd_soc_component *component, + const struct of_phandle_args *args, + const char **dai_name) +{ + int id = args->args[0]; + int ret = -EINVAL; + int i; + + for (i = 0; i < ARRAY_SIZE(q6usb_be_dais); i++) { + if (q6usb_be_dais[i].id == id) { + *dai_name = q6usb_be_dais[i].name; + ret = 0; + break; + } + } + + return ret; +} + +static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb, + struct snd_soc_usb_device *sdev, bool connected) +{ + struct q6usb_port_data *data; + + if (!usb->component) + return -ENODEV; + + data = dev_get_drvdata(usb->component->dev); + + if (connected) + /* We only track the latest USB headset plugged in */ + data->active_idx = sdev->card_idx; + + return 0; +} + +static int q6usb_component_probe(struct snd_soc_component *component) +{ + struct q6usb_port_data *data = dev_get_drvdata(component->dev); + + data->usb = snd_soc_usb_add_port(component->dev, &data->priv, q6usb_alsa_connection_cb); + if (IS_ERR(data->usb)) { + dev_err(component->dev, "failed to add usb port\n"); + return -ENODEV; + } + + data->usb->component = component; + + return 0; +} + +static void q6usb_component_remove(struct snd_soc_component *component) +{ + snd_soc_usb_remove_port(component->dev); +} + +static const struct snd_soc_component_driver q6usb_dai_component = { + .probe = q6usb_component_probe, + .remove = q6usb_component_remove, + .name = "q6usb-dai-component", + .dapm_widgets = q6usb_dai_widgets, + .num_dapm_widgets = ARRAY_SIZE(q6usb_dai_widgets), + .dapm_routes = q6usb_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(q6usb_dapm_routes), + .of_xlate_dai_name = q6usb_audio_ports_of_xlate_dai_name, +}; + +static int q6usb_dai_dev_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct q6usb_port_data *data; + struct device *dev = &pdev->dev; + struct of_phandle_args args; + int ret; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + ret = of_property_read_u32(node, "qcom,usb-audio-intr-num", + &data->priv.intr_num); + if (ret) { + dev_err(&pdev->dev, "failed to read intr num.\n"); + return ret; + } + + ret = of_parse_phandle_with_fixed_args(node, "iommus", 1, 0, &args); + if (ret < 0) + data->priv.sid = -1; + else + data->priv.sid = args.args[0] & SID_MASK; + + data->priv.domain = iommu_get_domain_for_dev(&pdev->dev); + + data->priv.dev = dev; + dev_set_drvdata(dev, data); + + return devm_snd_soc_register_component(dev, &q6usb_dai_component, + q6usb_be_dais, ARRAY_SIZE(q6usb_be_dais)); +} + +static int q6usb_dai_dev_remove(struct platform_device *pdev) +{ + return 0; +} + +static const struct of_device_id q6usb_dai_device_id[] = { + { .compatible = "qcom,q6usb" }, + {}, +}; +MODULE_DEVICE_TABLE(of, q6usb_dai_device_id); + +static struct platform_driver q6usb_dai_platform_driver = { + .driver = { + .name = "q6usb-dai", + .of_match_table = of_match_ptr(q6usb_dai_device_id), + }, + .probe = q6usb_dai_dev_probe, + .remove = q6usb_dai_dev_remove, +}; +module_platform_driver(q6usb_dai_platform_driver); + +MODULE_DESCRIPTION("Q6 USB backend dai driver"); +MODULE_LICENSE("GPL");
Create a USB BE component that will register a new USB port to the ASoC USB framework. This will handle determination on if the requested audio profile is supported by the USB device currently selected. Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> --- include/sound/q6usboffload.h | 20 ++++ sound/soc/qcom/Kconfig | 4 + sound/soc/qcom/qdsp6/Makefile | 1 + sound/soc/qcom/qdsp6/q6usb.c | 200 ++++++++++++++++++++++++++++++++++ 4 files changed, 225 insertions(+) create mode 100644 include/sound/q6usboffload.h create mode 100644 sound/soc/qcom/qdsp6/q6usb.c