@@ -38,11 +38,16 @@ struct byt_wm5102_private {
int mclk_freq;
};
-/* Bits 0-3 are reserved for the input-map */
+#define BYT_WM5102_IN_MAP GENMASK(3, 0)
#define BYT_WM5102_OUT_MAP GENMASK(7, 4)
#define BYT_WM5102_SSP2 BIT(16)
#define BYT_WM5102_MCLK_19_2MHZ BIT(17)
+enum {
+ BYT_WM5102_INTMIC_IN3L_HSMIC_IN1L,
+ BYT_WM5102_INTMIC_IN1L_HSMIC_IN2L,
+};
+
/* Note these values are pre-shifted for easy use of setting quirks */
enum {
BYT_WM5102_SPK_SPK_MAP = FIELD_PREP_CONST(BYT_WM5102_OUT_MAP, 0),
@@ -57,6 +62,20 @@ MODULE_PARM_DESC(quirk, "Board-specific quirk override");
static void log_quirks(struct device *dev)
{
+ switch (quirk & BYT_WM5102_IN_MAP) {
+ case BYT_WM5102_INTMIC_IN3L_HSMIC_IN1L:
+ dev_info_once(dev, "quirk INTMIC_IN3L_HSMIC_IN1L enabled\n");
+ break;
+ case BYT_WM5102_INTMIC_IN1L_HSMIC_IN2L:
+ dev_info_once(dev, "quirk INTMIC_IN1L_HSMIC_IN2L enabled\n");
+ break;
+ default:
+ dev_warn_once(dev, "quirk sets invalid input map: 0x%lx, defaulting to INTMIC_IN3L_HSMIC_IN1L\n",
+ quirk & BYT_WM5102_IN_MAP);
+ quirk &= ~BYT_WM5102_IN_MAP;
+ quirk |= BYT_WM5102_INTMIC_IN3L_HSMIC_IN1L;
+ break;
+ }
switch (quirk & BYT_WM5102_OUT_MAP) {
case BYT_WM5102_SPK_SPK_MAP:
dev_info_once(dev, "quirk SPK_SPK_MAP enabled\n");
@@ -191,16 +210,13 @@ static const struct snd_soc_dapm_route byt_wm5102_audio_map[] = {
{"Headphone", NULL, "HPOUT1L"},
{"Headphone", NULL, "HPOUT1R"},
- {"Internal Mic", NULL, "MICBIAS3"},
- {"IN3L", NULL, "Internal Mic"},
-
/*
* The Headset Mix uses MICBIAS1 or 2 depending on if a CTIA/OMTP Headset
* is connected, as the MICBIAS is applied after the CTIA/OMTP cross-switch.
*/
{"Headset Mic", NULL, "MICBIAS1"},
{"Headset Mic", NULL, "MICBIAS2"},
- {"IN1L", NULL, "Headset Mic"},
+ {"Internal Mic", NULL, "MICBIAS3"},
};
static const struct snd_soc_dapm_route bytcr_wm5102_ssp0_map[] = {
@@ -231,6 +247,16 @@ static const struct snd_soc_dapm_route byt_wm5102_spk_hpout2_map[] = {
{"Speaker", NULL, "HPOUT2R"},
};
+static const struct snd_soc_dapm_route byt_wm5102_intmic_in3l_hsmic_in1l_map[] = {
+ {"IN3L", NULL, "Internal Mic"},
+ {"IN1L", NULL, "Headset Mic"},
+};
+
+static const struct snd_soc_dapm_route byt_wm5102_intmic_in1l_hsmic_in2l_map[] = {
+ {"IN1L", NULL, "Internal Mic"},
+ {"IN2L", NULL, "Headset Mic"},
+};
+
static const struct snd_kcontrol_new byt_wm5102_controls[] = {
SOC_DAPM_PIN_SWITCH("Headphone"),
SOC_DAPM_PIN_SWITCH("Headset Mic"),
@@ -271,6 +297,20 @@ static int byt_wm5102_init(struct snd_soc_pcm_runtime *runtime)
return ret;
}
+ switch (quirk & BYT_WM5102_IN_MAP) {
+ case BYT_WM5102_INTMIC_IN3L_HSMIC_IN1L:
+ custom_map = byt_wm5102_intmic_in3l_hsmic_in1l_map;
+ num_routes = ARRAY_SIZE(byt_wm5102_intmic_in3l_hsmic_in1l_map);
+ break;
+ case BYT_WM5102_INTMIC_IN1L_HSMIC_IN2L:
+ custom_map = byt_wm5102_intmic_in1l_hsmic_in2l_map;
+ num_routes = ARRAY_SIZE(byt_wm5102_intmic_in1l_hsmic_in2l_map);
+ break;
+ }
+ ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes);
+ if (ret)
+ return ret;
+
switch (quirk & BYT_WM5102_OUT_MAP) {
case BYT_WM5102_SPK_SPK_MAP:
custom_map = byt_wm5102_spk_spk_map;
@@ -481,6 +521,8 @@ static char byt_wm5102_components[64]; /* = "cfg-spk:* cfg-int-mic:* cfg-hs-mic:
static int snd_byt_wm5102_mc_probe(struct platform_device *pdev)
{
static const char * const out_map_name[] = { "spk", "hpout2" };
+ static const char * const intmic_map_name[] = { "in3l", "in1l" };
+ static const char * const hsmic_map_name[] = { "in1l", "in2l" };
char codec_name[SND_ACPI_I2C_ID_LEN];
struct device *dev = &pdev->dev;
struct byt_wm5102_private *priv;
@@ -541,9 +583,10 @@ static int snd_byt_wm5102_mc_probe(struct platform_device *pdev)
/*
* CHT always uses SSP2 and 19.2 MHz; and
* the one currently supported CHT design uses HPOUT2 as
- * speaker output.
+ * speaker output and has the intmic on IN1L + hsmic on IN2L.
*/
quirk = BYT_WM5102_SSP2 | BYT_WM5102_MCLK_19_2MHZ |
+ BYT_WM5102_INTMIC_IN1L_HSMIC_IN2L |
BYT_WM5102_SPK_HPOUT2_MAP;
}
if (quirk_override != -1) {
@@ -554,7 +597,10 @@ static int snd_byt_wm5102_mc_probe(struct platform_device *pdev)
log_quirks(dev);
snprintf(byt_wm5102_components, sizeof(byt_wm5102_components),
- "cfg-spk:%s", out_map_name[FIELD_GET(BYT_WM5102_OUT_MAP, quirk)]);
+ "cfg-spk:%s cfg-intmic:%s cfg-hsmic:%s",
+ out_map_name[FIELD_GET(BYT_WM5102_OUT_MAP, quirk)],
+ intmic_map_name[FIELD_GET(BYT_WM5102_IN_MAP, quirk)],
+ hsmic_map_name[FIELD_GET(BYT_WM5102_IN_MAP, quirk)]);
byt_wm5102_card.components = byt_wm5102_components;
/* find index of codec dai */
Unlike all designs supported sofar the Lenovo Yoga Tab 3 YT3-X90 does not have its internal microphone (intmic) on IN3L with the headset microphone on IN1L. Instead this tablet has the intmic on IN1L and the hsmic on IN2L. Add a BYT_WM5102_IN_MAP quirk mechanism to allow selecting between different input maps and add support for both setups with the current settings being the default map. The new INTMIC_IN1L_HSMIC_IN2L map is enabled by default on CHT because the Lenovo Yoga Tab 3 YT3-X90 model is the only Cherry Trail design currently supported. If different CHT designs turn up which need different input maps we can add DMI quirks to select a different map later. The userspace UCM profile also needs to know about this so extend the components string with this info too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- sound/soc/intel/boards/bytcr_wm5102.c | 60 +++++++++++++++++++++++---- 1 file changed, 53 insertions(+), 7 deletions(-)