[v2,2/2] ASoC: nau8821: Add slew rate controls.

Commit Message

Seven Lee Oct. 27, 2023, 8:21 a.m. UTC

The patch supports DMIC clock slew rate selection.

Signed-off-by: Seven Lee <[e-mail]>
---
 sound/soc/codecs/nau8821.c | 7 +++++++
 sound/soc/codecs/nau8821.h | 3 +++
 2 files changed, 10 insertions(+)

Patch

diff --git a/sound/soc/codecs/nau8821.c b/sound/soc/codecs/nau8821.c
index 6e1b6b26298a..d8190e8a431f 100644
--- a/sound/soc/codecs/nau8821.c
+++ b/sound/soc/codecs/nau8821.c
@@ -1738,6 +1738,10 @@  static int nau8821_read_device_properties(struct device *dev,
 		&nau8821->dmic_clk_threshold);
 	if (ret)
 		nau8821->dmic_clk_threshold = 3072000;
+	ret = device_property_read_u32(dev, "nuvoton,dmic-slew-rate-selection",
+		&nau8821->dmic_slew_rate_sel);
+	if (ret)
+		nau8821->dmic_slew_rate_sel = 0;
 
 	return 0;
 }
@@ -1797,6 +1801,9 @@  static void nau8821_init_regs(struct nau8821 *nau8821)
 		NAU8821_ADC_SYNC_DOWN_MASK, NAU8821_ADC_SYNC_DOWN_64);
 	regmap_update_bits(regmap, NAU8821_R2C_DAC_CTRL1,
 		NAU8821_DAC_OVERSAMPLE_MASK, NAU8821_DAC_OVERSAMPLE_64);
+	regmap_update_bits(regmap, NAU8821_R13_DMIC_CTRL,
+		NAU8821_DMIC_SLEW_MASK, nau8821->dmic_slew_rate_sel <<
+		NAU8821_DMIC_SLEW_SFT);
 	if (nau8821->left_input_single_end) {
 		regmap_update_bits(regmap, NAU8821_R6B_PGA_MUTE,
 			NAU8821_MUTE_MICNL_EN, NAU8821_MUTE_MICNL_EN);
diff --git a/sound/soc/codecs/nau8821.h b/sound/soc/codecs/nau8821.h
index 00a888ed07ce..480f605d5d50 100644
--- a/sound/soc/codecs/nau8821.h
+++ b/sound/soc/codecs/nau8821.h
@@ -236,6 +236,8 @@ 
 #define NAU8821_DMIC_SRC_MASK	(0x3 << NAU8821_DMIC_SRC_SFT)
 #define NAU8821_CLK_DMIC_SRC	(0x2 << NAU8821_DMIC_SRC_SFT)
 #define NAU8821_DMIC_EN_SFT	0
+#define NAU8821_DMIC_SLEW_SFT  8
+#define NAU8821_DMIC_SLEW_MASK (0x7 << NAU8821_DMIC_SLEW_SFT)
 
 /* GPIO12_CTRL (0x1a) */
 #define NAU8821_JKDET_PULL_UP	(0x1 << 11) /* 0 - pull down, 1 - pull up */
@@ -573,6 +575,7 @@  struct nau8821 {
 	int jack_eject_debounce;
 	int fs;
 	int dmic_clk_threshold;
+	int dmic_slew_rate_sel;
 	int key_enable;
 };