| Message ID | 20231207095425.19597-1-peter.ujfalusi@linux.intel.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | ce17aa4cf2db7d6b95a3f854ac52d0d49881dd49 |
| Headers | show |
| Series | ASoC: SOF: Intel: hda-codec: Delay the codec device registration | expand |
On Thu, 07 Dec 2023 11:54:25 +0200, Peter Ujfalusi wrote: > The current code flow is: > 1. snd_hdac_device_register() > 2. set parameters needed by the hdac driver > 3. request_codec_module() > the hdac driver is probed at this point > > During boot the codec drivers are not loaded when the hdac device is > registered, it is going to be probed later when loading the codec module, > which point the parameters are set. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/1] ASoC: SOF: Intel: hda-codec: Delay the codec device registration commit: ce17aa4cf2db7d6b95a3f854ac52d0d49881dd49 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/sound/soc/sof/intel/hda-codec.c b/sound/soc/sof/intel/hda-codec.c index 28ecbebb4b84..9f84b0d287a5 100644 --- a/sound/soc/sof/intel/hda-codec.c +++ b/sound/soc/sof/intel/hda-codec.c @@ -54,8 +54,16 @@ static int request_codec_module(struct hda_codec *codec) static int hda_codec_load_module(struct hda_codec *codec) { - int ret = request_codec_module(codec); + int ret; + + ret = snd_hdac_device_register(&codec->core); + if (ret) { + dev_err(&codec->core.dev, "failed to register hdac device\n"); + put_device(&codec->core.dev); + return ret; + } + ret = request_codec_module(codec); if (ret <= 0) { codec->probe_id = HDA_CODEC_ID_GENERIC; ret = request_codec_module(codec); @@ -116,7 +124,6 @@ EXPORT_SYMBOL_NS_GPL(hda_codec_jack_check, SND_SOC_SOF_HDA_AUDIO_CODEC); static struct hda_codec *hda_codec_device_init(struct hdac_bus *bus, int addr, int type) { struct hda_codec *codec; - int ret; codec = snd_hda_codec_device_init(to_hda_bus(bus), addr, "ehdaudio%dD%d", bus->idx, addr); if (IS_ERR(codec)) { @@ -126,13 +133,6 @@ static struct hda_codec *hda_codec_device_init(struct hdac_bus *bus, int addr, i codec->core.type = type; - ret = snd_hdac_device_register(&codec->core); - if (ret) { - dev_err(bus->dev, "failed to register hdac device\n"); - put_device(&codec->core.dev); - return ERR_PTR(ret); - } - return codec; }
The current code flow is: 1. snd_hdac_device_register() 2. set parameters needed by the hdac driver 3. request_codec_module() the hdac driver is probed at this point During boot the codec drivers are not loaded when the hdac device is registered, it is going to be probed later when loading the codec module, which point the parameters are set. On module remove/insert rmmod snd_sof_pci_intel_tgl modprobe snd_sof_pci_intel_tgl The codec module remains loaded and the driver will be probed when the hdac device is created right away, before the parameters for the driver has been configured: 1. snd_hdac_device_register() the hdac driver is probed at this point 2. set parameters needed by the hdac driver 3. request_codec_module() will be a NOP as the module is already loaded Move the snd_hdac_device_register() later, to be done right before requesting the codec module to make sure that the parameters are all set before the device is created: 1. set parameters needed by the hdac driver 2. snd_hdac_device_register() 3. request_codec_module() This way at the hdac driver probe all parameters will be set in all cases. Link: https://github.com/thesofproject/linux/issues/4731 Fixes: a0575b4add21 ("ASoC: hdac_hda: Conditionally register dais for HDMI and Analog") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> --- Hi, The conditional DAI registering ended up using the need_display_power parameter of hda_priv which worked fine in testing when all modules were removed then re-loaded. It failed when only the snd_sof_pci_intel_tgl is removed/loaded for example, because at next module loading the hdac_hda_dev_probe() got called before the hda_priv was prepared for it. This has been an 'issue' prior to that patch as well, but the hda_priv was not used, so it went unnoticed. Regards, Peter sound/soc/sof/intel/hda-codec.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)