| Message ID | 20231222150133.732662-4-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | reset: gpio: ASoC: shared GPIO resets | expand |
On 22/12/2023 16:01, Krzysztof Kozlowski wrote: > @@ -37,11 +41,14 @@ properties: > required: > - compatible > - reg > - - powerdown-gpios > - '#sound-dai-cells' > - vdd-1p8-supply > - vdd-io-supply > > +oneOf: > + - powerdown-gpios > + - reset-gpios And this obviously was not tested, so Krzysztof: It does not look like you tested the bindings, at least after quick look. Please run `make dt_binding_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). Maybe you need to update your dtschema and yamllint. Best regards, Krzysztof
On Fri, 22 Dec 2023 16:01:32 +0100, Krzysztof Kozlowski wrote: > On newer Qualcomm platforms, like X1E80100-CRD, the WSA884x speakers > share SD_N GPIOs between two speakers, thus a coordinated assertion is > needed. Linux supports handling shared GPIO lines through "reset-gpios" > property, thus allow specifying either powerdown or reset GPIOs (these > are the same). > > Cc: Bartosz Golaszewski <brgl@bgdev.pl> > Cc: Sean Anderson <sean.anderson@seco.com> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > If previous patches are fine, then this commit is independent and could > be taken via ASoC. > --- > .../devicetree/bindings/sound/qcom,wsa8840.yaml | 9 ++++++++- > 1 file changed, 8 insertions(+), 1 deletion(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml: oneOf:0: 'powerdown-gpios' is not of type 'object', 'boolean' from schema $id: http://json-schema.org/draft-07/schema# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml: oneOf:1: 'reset-gpios' is not of type 'object', 'boolean' from schema $id: http://json-schema.org/draft-07/schema# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml: oneOf: ['powerdown-gpios', 'reset-gpios'] should not be valid under {'items': {'propertyNames': {'const': 'const'}, 'required': ['const']}} hint: Use 'enum' rather than 'oneOf' + 'const' entries from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# Traceback (most recent call last): File "/usr/local/bin/dt-validate", line 8, in <module> sys.exit(main()) ^^^^^^ File "/usr/local/lib/python3.11/dist-packages/dtschema/dtb_validate.py", line 144, in main sg.check_dtb(filename) File "/usr/local/lib/python3.11/dist-packages/dtschema/dtb_validate.py", line 89, in check_dtb self.check_subtree(dt, subtree, False, "/", "/", filename) File "/usr/local/lib/python3.11/dist-packages/dtschema/dtb_validate.py", line 82, in check_subtree self.check_subtree(tree, value, disabled, name, fullname + name, filename) File "/usr/local/lib/python3.11/dist-packages/dtschema/dtb_validate.py", line 82, in check_subtree self.check_subtree(tree, value, disabled, name, fullname + name, filename) File "/usr/local/lib/python3.11/dist-packages/dtschema/dtb_validate.py", line 82, in check_subtree self.check_subtree(tree, value, disabled, name, fullname + name, filename) File "/usr/local/lib/python3.11/dist-packages/dtschema/dtb_validate.py", line 77, in check_subtree self.check_node(tree, subtree, disabled, nodename, fullname, filename) File "/usr/local/lib/python3.11/dist-packages/dtschema/dtb_validate.py", line 33, in check_node for error in self.validator.iter_errors(node, filter=match_schema_file): File "/usr/local/lib/python3.11/dist-packages/dtschema/validator.py", line 403, in iter_errors for error in self.DtValidator(sch, File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 288, in iter_errors for error in errors: File "/usr/local/lib/python3.11/dist-packages/jsonschema/_validators.py", line 414, in if_ yield from validator.descend(instance, then, schema_path="then") File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 305, in descend for error in self.evolve(schema=schema).iter_errors(instance): File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 288, in iter_errors for error in errors: File "/usr/local/lib/python3.11/dist-packages/jsonschema/_validators.py", line 383, in oneOf errs = list(validator.descend(instance, subschema, schema_path=index)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 305, in descend for error in self.evolve(schema=schema).iter_errors(instance): File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 278, in iter_errors scope = id_of(_schema) ^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/jsonschema/validators.py", line 101, in _id_of return schema.get("$id", "") ^^^^^^^^^^ AttributeError: 'str' object has no attribute 'get' doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231222150133.732662-4-krzysztof.kozlowski@linaro.org The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml index d717017b0fdb..4b4bcbeba9c1 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml @@ -28,6 +28,10 @@ properties: description: Powerdown/Shutdown line to use (pin SD_N) maxItems: 1 + reset-gpios: + description: Powerdown/Shutdown line to use (pin SD_N) + maxItems: 1 + '#sound-dai-cells': const: 0 @@ -37,11 +41,14 @@ properties: required: - compatible - reg - - powerdown-gpios - '#sound-dai-cells' - vdd-1p8-supply - vdd-io-supply +oneOf: + - powerdown-gpios + - reset-gpios + unevaluatedProperties: false examples:
On newer Qualcomm platforms, like X1E80100-CRD, the WSA884x speakers share SD_N GPIOs between two speakers, thus a coordinated assertion is needed. Linux supports handling shared GPIO lines through "reset-gpios" property, thus allow specifying either powerdown or reset GPIOs (these are the same). Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- If previous patches are fine, then this commit is independent and could be taken via ASoC. --- .../devicetree/bindings/sound/qcom,wsa8840.yaml | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)