| Message ID | 20240405144141.47217-1-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] soundwire: qcom: allow multi-link on newer devices | expand |
On 05-04-24, 16:41, Krzysztof Kozlowski wrote: > Newer Qualcomm SoCs like X1E80100 might come with four speakers spread > over two Soundwire controllers, thus they need a multi-link Soundwire > stream runtime. > > Cc: Mark Brown <broonie@kernel.org> > Cc: alsa-devel@alsa-project.org > Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Changes in v2: > 1. Only rebase (slightly different context) Applying /tmp/v2_20240405_krzysztof_kozlowski_soundwire_qcom_allow_multi_link_on_newer_devices.mbx Applying: soundwire: qcom: allow multi-link on newer devices error: drivers/soundwire/qcom.c: does not match index Patch failed at 0001 soundwire: qcom: allow multi-link on newer devices This fails as well :-( > --- > drivers/soundwire/qcom.c | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c > index fb70afe64fcc..ce5cf3ecceb5 100644 > --- a/drivers/soundwire/qcom.c > +++ b/drivers/soundwire/qcom.c > @@ -905,6 +905,18 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) > return 0; > } > > +static int qcom_swrm_read_prop(struct sdw_bus *bus) > +{ > + struct qcom_swrm_ctrl *ctrl = to_qcom_sdw(bus); > + > + if (ctrl->version >= SWRM_VERSION_2_0_0) { > + bus->multi_link = true; > + bus->hw_sync_min_links = 3; > + } > + > + return 0; > +} > + > static enum sdw_command_response qcom_swrm_xfer_msg(struct sdw_bus *bus, > struct sdw_msg *msg) > { > @@ -1056,6 +1068,7 @@ static const struct sdw_master_port_ops qcom_swrm_port_ops = { > }; > > static const struct sdw_master_ops qcom_swrm_ops = { > + .read_prop = qcom_swrm_read_prop, > .xfer_msg = qcom_swrm_xfer_msg, > .pre_bank_switch = qcom_swrm_pre_bank_switch, > }; > @@ -1173,6 +1186,15 @@ static int qcom_swrm_stream_alloc_ports(struct qcom_swrm_ctrl *ctrl, > > mutex_lock(&ctrl->port_lock); > list_for_each_entry(m_rt, &stream->master_list, stream_node) { > + /* > + * For streams with multiple masters: > + * Allocate ports only for devices connected to this master. > + * Such devices will have ports allocated by their own master > + * and its qcom_swrm_stream_alloc_ports() call. > + */ > + if (ctrl->bus.id != m_rt->bus->id) > + continue; > + > if (m_rt->direction == SDW_DATA_DIR_RX) { > maxport = ctrl->num_dout_ports; > port_mask = &ctrl->dout_port_mask; > -- > 2.34.1
On 11/04/2024 11:49, Vinod Koul wrote: > On 05-04-24, 16:41, Krzysztof Kozlowski wrote: >> Newer Qualcomm SoCs like X1E80100 might come with four speakers spread >> over two Soundwire controllers, thus they need a multi-link Soundwire >> stream runtime. >> >> Cc: Mark Brown <broonie@kernel.org> >> Cc: alsa-devel@alsa-project.org >> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> >> --- >> >> Changes in v2: >> 1. Only rebase (slightly different context) > > Applying /tmp/v2_20240405_krzysztof_kozlowski_soundwire_qcom_allow_multi_link_on_newer_devices.mbx > Applying: soundwire: qcom: allow multi-link on newer devices > error: drivers/soundwire/qcom.c: does not match index > Patch failed at 0001 soundwire: qcom: allow multi-link on newer devices > > This fails as well :-( I just applied it on v6.9-rc3 and next-20240410 with b4. No problems. Did anything change since yesterday next? Can you point me to the tree and branch you are using? Best regards, Krzysztof
On 11-04-24, 12:10, Krzysztof Kozlowski wrote: > On 11/04/2024 11:49, Vinod Koul wrote: > > On 05-04-24, 16:41, Krzysztof Kozlowski wrote: > >> Newer Qualcomm SoCs like X1E80100 might come with four speakers spread > >> over two Soundwire controllers, thus they need a multi-link Soundwire > >> stream runtime. > >> > >> Cc: Mark Brown <broonie@kernel.org> > >> Cc: alsa-devel@alsa-project.org > >> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> > >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > >> > >> --- > >> > >> Changes in v2: > >> 1. Only rebase (slightly different context) > > > > Applying /tmp/v2_20240405_krzysztof_kozlowski_soundwire_qcom_allow_multi_link_on_newer_devices.mbx > > Applying: soundwire: qcom: allow multi-link on newer devices > > error: drivers/soundwire/qcom.c: does not match index > > Patch failed at 0001 soundwire: qcom: allow multi-link on newer devices > > > > This fails as well :-( > > I just applied it on v6.9-rc3 and next-20240410 with b4. No problems. > > Did anything change since yesterday next? Can you point me to the tree > and branch you are using? Thanks for the clue, my tree was in a bad state, reset helped and the patch is now applied
On Fri, 05 Apr 2024 16:41:41 +0200, Krzysztof Kozlowski wrote: > Newer Qualcomm SoCs like X1E80100 might come with four speakers spread > over two Soundwire controllers, thus they need a multi-link Soundwire > stream runtime. > > Applied, thanks! [1/1] soundwire: qcom: allow multi-link on newer devices commit: ce5e811e069168898ae2ff02a90de68637ed7dc4 Best regards,
diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index fb70afe64fcc..ce5cf3ecceb5 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -905,6 +905,18 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) return 0; } +static int qcom_swrm_read_prop(struct sdw_bus *bus) +{ + struct qcom_swrm_ctrl *ctrl = to_qcom_sdw(bus); + + if (ctrl->version >= SWRM_VERSION_2_0_0) { + bus->multi_link = true; + bus->hw_sync_min_links = 3; + } + + return 0; +} + static enum sdw_command_response qcom_swrm_xfer_msg(struct sdw_bus *bus, struct sdw_msg *msg) { @@ -1056,6 +1068,7 @@ static const struct sdw_master_port_ops qcom_swrm_port_ops = { }; static const struct sdw_master_ops qcom_swrm_ops = { + .read_prop = qcom_swrm_read_prop, .xfer_msg = qcom_swrm_xfer_msg, .pre_bank_switch = qcom_swrm_pre_bank_switch, }; @@ -1173,6 +1186,15 @@ static int qcom_swrm_stream_alloc_ports(struct qcom_swrm_ctrl *ctrl, mutex_lock(&ctrl->port_lock); list_for_each_entry(m_rt, &stream->master_list, stream_node) { + /* + * For streams with multiple masters: + * Allocate ports only for devices connected to this master. + * Such devices will have ports allocated by their own master + * and its qcom_swrm_stream_alloc_ports() call. + */ + if (ctrl->bus.id != m_rt->bus->id) + continue; + if (m_rt->direction == SDW_DATA_DIR_RX) { maxport = ctrl->num_dout_ports; port_mask = &ctrl->dout_port_mask;