@@ -8909,6 +8909,13 @@ S: Maintained
F: sound/soc/fsl/fsl*
F: sound/soc/fsl/imx*
+FREESCALE SOC LPC32XX SOUND DRIVERS
+M: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
+L: alsa-devel@alsa-project.org (moderated for non-subscribers)
+L: linuxppc-dev@lists.ozlabs.org
+S: Orphan
+F: sound/soc/fsl/lpc3xxx-*
+
FREESCALE SOC SOUND QMC DRIVER
M: Herve Codina <herve.codina@bootlin.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -221,6 +221,8 @@ spi2: spi@20090000 {
i2s0: i2s@20094000 {
compatible = "nxp,lpc3220-i2s";
reg = <0x20094000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_I2S0>;
+ clock-names = "i2s_clk";
status = "disabled";
};
@@ -237,6 +239,8 @@ sd: sd@20098000 {
i2s1: i2s@2009c000 {
compatible = "nxp,lpc3220-i2s";
reg = <0x2009c000 0x1000>;
+ clocks = <&clk LPC32XX_CLK_I2S1>;
+ clock-names = "i2s_clk";
status = "disabled";
};
@@ -9,6 +9,7 @@
*/
#include <linux/amba/pl08x.h>
+#include <linux/amba/pl022.h>
#include <linux/mtd/lpc32xx_mlc.h>
#include <linux/mtd/lpc32xx_slc.h>
#include <linux/of_platform.h>
@@ -29,6 +30,46 @@ static struct pl08x_channel_data pl08x_slave_channels[] = {
.max_signal = 12,
.periph_buses = PL08X_AHB1,
},
+ {
+ .bus_id = "i2s-tx",
+ .min_signal = 13,
+ .max_signal = 13,
+ .periph_buses = PL08X_AHB1,
+ },
+ {
+ .bus_id = "i2s-rx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .periph_buses = PL08X_AHB1,
+ },
+ {
+ .bus_id = "ssp0-tx",
+ .min_signal = 15,
+ .max_signal = 15,
+ .muxval = 1,
+ .periph_buses = PL08X_AHB1,
+ },
+ {
+ .bus_id = "ssp0-rx",
+ .min_signal = 14,
+ .max_signal = 14,
+ .muxval = 1,
+ .periph_buses = PL08X_AHB1,
+ },
+ {
+ .bus_id = "ssp1-tx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .muxval = 1,
+ .periph_buses = PL08X_AHB1,
+ },
+ {
+ .bus_id = "ssp1-rx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .muxval = 1,
+ .periph_buses = PL08X_AHB1,
+ },
};
static int pl08x_get_signal(const struct pl08x_channel_data *cd)
@@ -60,12 +101,31 @@ static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = {
.dma_filter = pl08x_filter_id,
};
+static struct pl022_ssp_controller lpc32xx_ssp_data[] = {
+ {
+ .bus_id = 0,
+ .enable_dma = 0,
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "ssp0-tx",
+ .dma_rx_param = "ssp0-rx",
+ },
+ {
+ .bus_id = 1,
+ .enable_dma = 0,
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "ssp1-tx",
+ .dma_rx_param = "ssp1-rx",
+ }
+};
+
static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash",
&lpc32xx_slc_data),
OF_DEV_AUXDATA("nxp,lpc3220-mlc", 0x200a8000, "200a8000.flash",
&lpc32xx_mlc_data),
+ OF_DEV_AUXDATA("arm,pl022", 0x20084000, NULL, &lpc32xx_ssp_data[0]),
+ OF_DEV_AUXDATA("arm,pl022", 0x2008c000, NULL, &lpc32xx_ssp_data[1]),
{ }
};
@@ -130,6 +130,13 @@ config SND_SOC_FSL_RPMSG
This option is only useful for out-of-tree drivers since
in-tree drivers select it automatically.
+config SND_SOC_FSL_LPC3XXX
+ tristate "SoC Audio for NXP LPC32XX CPUs"
+ depends on ARCH_LPC32XX && SND_SOC
+ select SND_SOC_GENERIC_DMAENGINE_PCM
+ help
+ Say Y or M if you want to add support for the LPC3XXX I2S interface.
+
config SND_SOC_IMX_PCM_DMA
tristate
select SND_SOC_GENERIC_DMAENGINE_PCM
@@ -25,6 +25,7 @@ snd-soc-fsl-xcvr-y := fsl_xcvr.o
snd-soc-fsl-aud2htx-y := fsl_aud2htx.o
snd-soc-fsl-rpmsg-y := fsl_rpmsg.o
snd-soc-fsl-qmc-audio-y := fsl_qmc_audio.o
+snd-soc-fsl-lpc3xxx-y := lpc3xxx-pcm.o lpc3xxx-i2s.o
obj-$(CONFIG_SND_SOC_FSL_AUDMIX) += snd-soc-fsl-audmix.o
obj-$(CONFIG_SND_SOC_FSL_ASOC_CARD) += snd-soc-fsl-asoc-card.o
@@ -42,6 +43,7 @@ obj-$(CONFIG_SND_SOC_FSL_XCVR) += snd-soc-fsl-xcvr.o
obj-$(CONFIG_SND_SOC_FSL_AUD2HTX) += snd-soc-fsl-aud2htx.o
obj-$(CONFIG_SND_SOC_FSL_RPMSG) += snd-soc-fsl-rpmsg.o
obj-$(CONFIG_SND_SOC_POWERPC_QMC_AUDIO) += snd-soc-fsl-qmc-audio.o
+obj-$(CONFIG_SND_SOC_FSL_LPC3XXX) += snd-soc-fsl-lpc3xxx.o
# MPC5200 Platform Support
obj-$(CONFIG_SND_MPC52xx_DMA) += mpc5200_dma.o
new file mode 100644
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2008 NXP Semiconductors
+ * Copyright 2023 Timesys Corporation <piotr.wojtaszczyk@timesys.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/dmaengine_pcm.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include "lpc3xxx-i2s.h"
+
+#define I2S_PLAYBACK_FLAG 0x1
+#define I2S_CAPTURE_FLAG 0x2
+
+#define LPC3XXX_I2S_RATES ( \
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
+ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000)
+
+#define LPC3XXX_I2S_FORMATS ( \
+ SNDRV_PCM_FMTBIT_S8 | \
+ SNDRV_PCM_FMTBIT_S16_LE | \
+ SNDRV_PCM_FMTBIT_S32_LE)
+
+static u32 absd32(u32 v1, u32 v2)
+{
+ if (v1 > v2)
+ return v1 - v2;
+ return v2 - v1;
+}
+
+static void __lpc3xxx_find_clkdiv(u32 *clkx, u32 *clky, int freq, int xbytes, u32 clkrate)
+{
+ u32 i2srate;
+ u32 idxx, idyy;
+ u32 savedbitclkrate, diff, trate, baseclk;
+
+ /* Adjust rate for sample size (bits) and 2 channels and offset for
+ * divider in clock output
+ */
+ i2srate = (freq / 100) * 2 * (8 * xbytes);
+ i2srate = i2srate << 1;
+ clkrate = clkrate / 100;
+ baseclk = clkrate;
+ *clkx = 1;
+ *clky = 1;
+
+ /* Find the best divider */
+ *clkx = *clky = 0;
+ savedbitclkrate = 0;
+ diff = ~0;
+ for (idxx = 1; idxx < 0xFF; idxx++) {
+ for (idyy = 1; idyy < 0xFF; idyy++) {
+ trate = (baseclk * idxx) / idyy;
+ if (absd32(trate, i2srate) < diff) {
+ diff = absd32(trate, i2srate);
+ savedbitclkrate = trate;
+ *clkx = idxx;
+ *clky = idyy;
+ }
+ }
+ }
+}
+
+static int lpc3xxx_i2s_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *cpu_dai)
+{
+ struct lpc3xxx_i2s_info *i2s_info_p = snd_soc_dai_get_drvdata(cpu_dai);
+ struct device *dev = i2s_info_p->dev;
+ u32 flag;
+ int ret = 0;
+
+ mutex_lock(&i2s_info_p->lock);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ flag = I2S_PLAYBACK_FLAG;
+ else
+ flag = I2S_CAPTURE_FLAG;
+
+ if (flag & i2s_info_p->streams_in_use) {
+ dev_warn(dev, "I2S channel is busy\n");
+ ret = -EBUSY;
+ goto lpc32xx_unlock;
+ }
+
+ if (i2s_info_p->streams_in_use == 0) {
+ ret = clk_prepare_enable(i2s_info_p->clk);
+ if (ret) {
+ dev_err(dev, "Can't enable clock, err=%d\n", ret);
+ goto lpc32xx_unlock;
+ }
+ }
+
+ i2s_info_p->streams_in_use |= flag;
+
+lpc32xx_unlock:
+ mutex_unlock(&i2s_info_p->lock);
+ return ret;
+}
+
+static void lpc3xxx_i2s_shutdown(struct snd_pcm_substream *substream, struct snd_soc_dai *cpu_dai)
+{
+ struct lpc3xxx_i2s_info *i2s_info_p = snd_soc_dai_get_drvdata(cpu_dai);
+ struct regmap *regs = i2s_info_p->regs;
+ const u32 stop_bits = (I2S_RESET | I2S_STOP);
+ u32 flag;
+
+ mutex_lock(&i2s_info_p->lock);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ flag = I2S_PLAYBACK_FLAG;
+ regmap_write(regs, I2S_TX_RATE, 0);
+ regmap_update_bits(regs, I2S_DAO, stop_bits, stop_bits);
+ } else {
+ flag = I2S_CAPTURE_FLAG;
+ regmap_write(regs, I2S_RX_RATE, 0);
+ regmap_update_bits(regs, I2S_DAI, stop_bits, stop_bits);
+ }
+ i2s_info_p->streams_in_use &= ~flag;
+
+ if (i2s_info_p->streams_in_use == 0)
+ clk_disable_unprepare(i2s_info_p->clk);
+
+ mutex_unlock(&i2s_info_p->lock);
+}
+
+static int lpc3xxx_i2s_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct lpc3xxx_i2s_info *i2s_info_p = snd_soc_dai_get_drvdata(cpu_dai);
+
+ /* Will use in HW params later */
+ i2s_info_p->freq = freq;
+
+ return 0;
+}
+
+static int lpc3xxx_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
+{
+ struct lpc3xxx_i2s_info *i2s_info_p = snd_soc_dai_get_drvdata(cpu_dai);
+ struct device *dev = i2s_info_p->dev;
+
+ if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_I2S) {
+ dev_warn(dev, "unsupported bus format %d\n", fmt);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int lpc3xxx_i2s_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct lpc3xxx_i2s_info *i2s_info_p = snd_soc_dai_get_drvdata(cpu_dai);
+ struct device *dev = i2s_info_p->dev;
+ struct regmap *regs = i2s_info_p->regs;
+ int xfersize;
+ u32 tmp, clkx, clky;
+
+ tmp = I2S_RESET | I2S_STOP;
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S8:
+ tmp |= I2S_WW8 | I2S_WS_HP(I2S_WW8_HP);
+ xfersize = 1;
+ break;
+
+ case SNDRV_PCM_FORMAT_S16_LE:
+ tmp |= I2S_WW16 | I2S_WS_HP(I2S_WW16_HP);
+ xfersize = 2;
+ break;
+
+ case SNDRV_PCM_FORMAT_S32_LE:
+ tmp |= I2S_WW32 | I2S_WS_HP(I2S_WW32_HP);
+ xfersize = 4;
+ break;
+
+ default:
+ dev_warn(dev, "Unsupported audio data format %d\n", params_format(params));
+ return -EINVAL;
+ }
+
+ if (params_channels(params) == 1)
+ tmp |= I2S_MONO;
+
+ __lpc3xxx_find_clkdiv(&clkx, &clky, i2s_info_p->freq, xfersize, i2s_info_p->clkrate);
+
+ dev_dbg(dev, "Stream : %s\n",
+ substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? "playback" : "capture");
+ dev_dbg(dev, "Desired clock rate : %d\n", i2s_info_p->freq);
+ dev_dbg(dev, "Base clock rate : %d\n", i2s_info_p->clkrate);
+ dev_dbg(dev, "Transfer size (bytes) : %d\n", xfersize);
+ dev_dbg(dev, "Clock divider (x) : %d\n", clkx);
+ dev_dbg(dev, "Clock divider (y) : %d\n", clky);
+ dev_dbg(dev, "Channels : %d\n", params_channels(params));
+ dev_dbg(dev, "Data format : %s\n", "I2S");
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ regmap_write(regs, I2S_DMA1, I2S_DMA1_TX_EN | I2S_DMA0_TX_DEPTH(4));
+ regmap_write(regs, I2S_TX_RATE, (clkx << 8) | clky);
+ regmap_write(regs, I2S_DAO, tmp);
+ } else {
+ regmap_write(regs, I2S_DMA0, I2S_DMA0_RX_EN | I2S_DMA1_RX_DEPTH(4));
+ regmap_write(regs, I2S_RX_RATE, (clkx << 8) | clky);
+ regmap_write(regs, I2S_DAI, tmp);
+ }
+
+ return 0;
+}
+
+static int lpc3xxx_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct lpc3xxx_i2s_info *i2s_info_p = snd_soc_dai_get_drvdata(cpu_dai);
+ struct regmap *regs = i2s_info_p->regs;
+ int ret = 0;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ regmap_update_bits(regs, I2S_DAO, I2S_STOP, I2S_STOP);
+ else
+ regmap_update_bits(regs, I2S_DAI, I2S_STOP, I2S_STOP);
+ break;
+
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ regmap_update_bits(regs, I2S_DAO, (I2S_RESET | I2S_STOP), 0);
+ else
+ regmap_update_bits(regs, I2S_DAI, (I2S_RESET | I2S_STOP), 0);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int lpc3xxx_i2s_dai_probe(struct snd_soc_dai *dai)
+{
+ struct lpc3xxx_i2s_info *i2s_info_p = snd_soc_dai_get_drvdata(dai);
+
+ snd_soc_dai_init_dma_data(dai, &i2s_info_p->playback_dma_config,
+ &i2s_info_p->capture_dma_config);
+ return 0;
+}
+
+const struct snd_soc_dai_ops lpc3xxx_i2s_dai_ops = {
+ .probe = lpc3xxx_i2s_dai_probe,
+ .startup = lpc3xxx_i2s_startup,
+ .shutdown = lpc3xxx_i2s_shutdown,
+ .trigger = lpc3xxx_i2s_trigger,
+ .hw_params = lpc3xxx_i2s_hw_params,
+ .set_sysclk = lpc3xxx_i2s_set_dai_sysclk,
+ .set_fmt = lpc3xxx_i2s_set_dai_fmt,
+};
+
+struct snd_soc_dai_driver lpc3xxx_i2s_dai_driver = {
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = LPC3XXX_I2S_RATES,
+ .formats = LPC3XXX_I2S_FORMATS,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = LPC3XXX_I2S_RATES,
+ .formats = LPC3XXX_I2S_FORMATS,
+ },
+ .ops = &lpc3xxx_i2s_dai_ops,
+ .symmetric_rate = 1,
+ .symmetric_channels = 1,
+ .symmetric_sample_bits = 1,
+};
+
+static const struct snd_soc_component_driver lpc32xx_i2s_component = {
+ .name = "lpc32xx-i2s",
+ .legacy_dai_naming = 1,
+};
+
+static const struct regmap_config lpc32xx_i2s_regconfig = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = I2S_RX_RATE,
+};
+
+static int lpc32xx_i2s_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct lpc3xxx_i2s_info *i2s_info_p;
+ struct resource *res;
+ void __iomem *iomem;
+ int ret;
+
+ i2s_info_p = devm_kzalloc(dev, sizeof(*i2s_info_p), GFP_KERNEL);
+ if (!i2s_info_p)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, i2s_info_p);
+ i2s_info_p->dev = dev;
+
+ iomem = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(iomem))
+ return dev_err_probe(dev, PTR_ERR(iomem), "Can't map registers\n");
+
+ i2s_info_p->regs = devm_regmap_init_mmio(dev, iomem, &lpc32xx_i2s_regconfig);
+ if (IS_ERR(i2s_info_p->regs))
+ return dev_err_probe(dev, PTR_ERR(i2s_info_p->regs),
+ "failed to init register map: %d\n", ret);
+
+ i2s_info_p->clk = devm_clk_get(dev, "i2s_clk");
+ if (IS_ERR(i2s_info_p->clk))
+ return dev_err_probe(dev, PTR_ERR(i2s_info_p->clk), "Can't get clock\n");
+
+ i2s_info_p->clkrate = clk_get_rate(i2s_info_p->clk);
+ if (i2s_info_p->clkrate == 0)
+ return dev_err_probe(dev, -EINVAL, "Invalid returned clock rate\n");
+
+ mutex_init(&i2s_info_p->lock);
+
+ ret = devm_snd_soc_register_component(dev, &lpc32xx_i2s_component,
+ &lpc3xxx_i2s_dai_driver, 1);
+ if (ret)
+ return dev_err_probe(dev, ret, "Can't register cpu_dai component\n");
+
+ i2s_info_p->playback_dma_config.addr = (dma_addr_t)(res->start + I2S_TX_FIFO);
+ i2s_info_p->playback_dma_config.maxburst = 4;
+ i2s_info_p->playback_dma_config.filter_data = "i2s-tx";
+ i2s_info_p->capture_dma_config.addr = (dma_addr_t)(res->start + I2S_RX_FIFO);
+ i2s_info_p->capture_dma_config.maxburst = 4;
+ i2s_info_p->capture_dma_config.filter_data = "i2s-rx";
+
+ ret = lpc3xxx_pcm_register(pdev);
+ if (ret)
+ return dev_err_probe(dev, ret, "Can't register pcm component\n");
+
+ return 0;
+}
+
+static int lpc32xx_i2s_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static const struct of_device_id lpc32xx_i2s_match[] = {
+ { .compatible = "nxp,lpc3220-i2s" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_i2s_match);
+
+static struct platform_driver lpc32xx_i2s_driver = {
+ .probe = lpc32xx_i2s_probe,
+ .remove = lpc32xx_i2s_remove,
+ .driver = {
+ .name = "lpc3xxx-i2s",
+ .of_match_table = lpc32xx_i2s_match,
+ },
+};
+
+module_platform_driver(lpc32xx_i2s_driver);
+
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
+MODULE_AUTHOR("Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>");
+MODULE_DESCRIPTION("ASoC LPC3XXX I2S interface");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2008 NXP Semiconductors
+ * Copyright 2023 Timesys Corporation <piotr.wojtaszczyk@timesys.com>
+ */
+
+#ifndef __SOUND_SOC_LPC3XXX_I2S_H
+#define __SOUND_SOC_LPC3XXX_I2S_H
+
+#include <linux/types.h>
+#include <linux/regmap.h>
+
+struct lpc3xxx_i2s_info {
+ struct device *dev;
+ struct clk *clk;
+ struct mutex lock; /* To serialize user-space access */
+ struct regmap *regs;
+ u32 streams_in_use;
+ u32 clkrate;
+ int freq;
+ struct snd_dmaengine_dai_dma_data playback_dma_config;
+ struct snd_dmaengine_dai_dma_data capture_dma_config;
+};
+
+int lpc3xxx_pcm_register(struct platform_device *pdev);
+
+#define _SBF(f, v) ((v) << (f))
+#define _BIT(n) _SBF(n, 1)
+
+/* I2S controller register offsets */
+#define I2S_DAO 0x00
+#define I2S_DAI 0x04
+#define I2S_TX_FIFO 0x08
+#define I2S_RX_FIFO 0x0C
+#define I2S_STAT 0x10
+#define I2S_DMA0 0x14
+#define I2S_DMA1 0x18
+#define I2S_IRQ 0x1C
+#define I2S_TX_RATE 0x20
+#define I2S_RX_RATE 0x24
+
+/* i2s_daO i2s_dai register definitions */
+#define I2S_WW8 _SBF(0, 0) /* Word width is 8bit*/
+#define I2S_WW16 _SBF(0, 1) /* Word width is 16bit*/
+#define I2S_WW32 _SBF(0, 3) /* Word width is 32bit*/
+#define I2S_MONO _BIT(2) /* Mono */
+#define I2S_STOP _BIT(3) /* Stop, diables the access to FIFO, mutes the channel */
+#define I2S_RESET _BIT(4) /* Reset the channel */
+#define I2S_WS_SEL _BIT(5) /* Channel Master(0) or slave(1) mode select*/
+#define I2S_WS_HP(s) _SBF(6, s) /* Word select half period - 1 */
+
+#define I2S_MUTE _BIT(15) /* Mute the channel, Transmit channel only */
+
+#define I2S_WW32_HP 0x1f /* Word select half period for 32bit word width */
+#define I2S_WW16_HP 0x0f /* Word select half period for 16bit word width */
+#define I2S_WW8_HP 0x7 /* Word select half period for 8bit word width */
+
+#define WSMASK_HP 0X7FC /* Mask for WS half period bits */
+
+/* i2s_tx_fifo register definitions */
+#define I2S_FIFO_TX_WRITE(d) (d)
+
+/* i2s_rx_fifo register definitions */
+#define I2S_FIFO_RX_WRITE(d) (d)
+
+/* i2s_stat register definitions */
+#define I2S_IRQ_STAT _BIT(0)
+#define I2S_DMA0_REQ _BIT(1)
+#define I2S_DMA1_REQ _BIT(2)
+
+#define I2S_RX_STATE_MASK 0x0000ff00
+#define I2S_TX_STATE_MASK 0x00ff0000
+
+/* i2s_dma0 Configuration register definitions */
+#define I2S_DMA0_RX_EN _BIT(0) /* Enable RX DMA1*/
+#define I2S_DMA0_TX_EN _BIT(1) /* Enable TX DMA1*/
+#define I2S_DMA0_RX_DEPTH(s) _SBF(8, s) /* Set the level for DMA1 RX Request */
+#define I2S_DMA0_TX_DEPTH(s) _SBF(16, s) /* Set the level for DMA1 TX Request */
+
+/* i2s_dma1 Configuration register definitions */
+#define I2S_DMA1_RX_EN _BIT(0) /* Enable RX DMA1*/
+#define I2S_DMA1_TX_EN _BIT(1) /* Enable TX DMA1*/
+#define I2S_DMA1_RX_DEPTH(s) _SBF(8, s) /* Set the level for DMA1 RX Request */
+#define I2S_DMA1_TX_DEPTH(s) _SBF(16, s) /* Set the level for DMA1 TX Request */
+
+/* i2s_irq register definitions */
+#define I2S_RX_IRQ_EN _BIT(0) /* Enable RX IRQ*/
+#define I2S_TX_IRQ_EN _BIT(1) /* Enable TX IRQ*/
+#define I2S_IRQ_RX_DEPTH(s) _SBF(8, s) /* valid values ar 0 to 7 */
+#define I2S_IRQ_TX_DEPTH(s) _SBF(16, s) /* valid values ar 0 to 7 */
+
+#endif
new file mode 100644
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2008 NXP Semiconductors
+ * Copyright 2023 Timesys Corporation <piotr.wojtaszczyk@timesys.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/amba/pl08x.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/dmaengine_pcm.h>
+#include <sound/soc.h>
+
+#include "lpc3xxx-i2s.h"
+
+#define STUB_FORMATS (SNDRV_PCM_FMTBIT_S8 | \
+ SNDRV_PCM_FMTBIT_U8 | \
+ SNDRV_PCM_FMTBIT_S16_LE | \
+ SNDRV_PCM_FMTBIT_U16_LE | \
+ SNDRV_PCM_FMTBIT_S24_LE | \
+ SNDRV_PCM_FMTBIT_U24_LE | \
+ SNDRV_PCM_FMTBIT_S32_LE | \
+ SNDRV_PCM_FMTBIT_U32_LE | \
+ SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE)
+
+static const struct snd_pcm_hardware lpc3xxx_pcm_hardware = {
+ .info = (SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_RESUME),
+ .formats = STUB_FORMATS,
+ .period_bytes_min = 128,
+ .period_bytes_max = 2048,
+ .periods_min = 2,
+ .periods_max = 1024,
+ .buffer_bytes_max = 128 * 1024
+};
+
+static const struct snd_dmaengine_pcm_config lpc3xxx_dmaengine_pcm_config = {
+ .pcm_hardware = &lpc3xxx_pcm_hardware,
+ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
+ .compat_filter_fn = pl08x_filter_id,
+ .prealloc_buffer_size = 128 * 1024,
+};
+
+const struct snd_soc_component_driver lpc3xxx_soc_platform_driver = {
+ .name = "lpc32xx-pcm",
+};
+
+int lpc3xxx_pcm_register(struct platform_device *pdev)
+{
+ int ret;
+ int flags;
+
+ flags = SND_DMAENGINE_PCM_FLAG_NO_DT | SND_DMAENGINE_PCM_FLAG_COMPAT;
+ ret = devm_snd_dmaengine_pcm_register(&pdev->dev, &lpc3xxx_dmaengine_pcm_config, flags);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register dmaengine: %d\n", ret);
+ return ret;
+ }
+
+ return devm_snd_soc_register_component(&pdev->dev, &lpc3xxx_soc_platform_driver,
+ NULL, 0);
+}
+EXPORT_SYMBOL(lpc3xxx_pcm_register);
This driver was ported from an old version in linux 2.6.27 and adjusted for the new ASoC framework and DMA API. Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com> --- Changes for v2: - Coding Style cleanup - Use dev_err_probe() for error handling in probe function - Removed unneded err_clk_disable label - Removed empty function - Droped of_match_ptr in lpc32xx_i2s_match DT match table - ASoC struct adjustmes for the latest 6.10-rc3 kernel MAINTAINERS | 7 + arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi | 4 + arch/arm/mach-lpc32xx/phy3250.c | 60 ++++ sound/soc/fsl/Kconfig | 7 + sound/soc/fsl/Makefile | 2 + sound/soc/fsl/lpc3xxx-i2s.c | 383 +++++++++++++++++++++++++ sound/soc/fsl/lpc3xxx-i2s.h | 94 ++++++ sound/soc/fsl/lpc3xxx-pcm.c | 75 +++++ 8 files changed, 632 insertions(+) create mode 100644 sound/soc/fsl/lpc3xxx-i2s.c create mode 100644 sound/soc/fsl/lpc3xxx-i2s.h create mode 100644 sound/soc/fsl/lpc3xxx-pcm.c