@@ -117,10 +117,17 @@ struct tasdevice_fw {
struct device *dev;
};
-enum tasdevice_dsp_fw_state {
- TASDEVICE_DSP_FW_NONE = 0,
+enum tasdevice_fw_state {
+ /* Driver in startup mode, not load any firmware. */
TASDEVICE_DSP_FW_PENDING,
+ /* DSP firmware in the system, but parsing error. */
TASDEVICE_DSP_FW_FAIL,
+ /*
+ * Only RCA (Reconfigurable Architecture) firmware load
+ * successfully.
+ */
+ TASDEVICE_RCA_FW_OK,
+ /* Both RCA and DSP firmware load successfully. */
TASDEVICE_DSP_FW_ALL_OK,
};
@@ -2324,14 +2324,21 @@ void tasdevice_tuning_switch(void *context, int state)
struct tasdevice_fw *tas_fmw = tas_priv->fmw;
int profile_cfg_id = tas_priv->rcabin.profile_cfg_id;
- if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) {
- dev_err(tas_priv->dev, "DSP bin file not loaded\n");
+ /*
+ * Only RCA-based Playback can still work with no dsp program running
+ * inside the chip.
+ */
+ switch (tas_priv->fw_state) {
+ case TASDEVICE_RCA_FW_OK:
+ case TASDEVICE_DSP_FW_ALL_OK:
+ break;
+ default:
return;
}
if (state == 0) {
- if (tas_priv->cur_prog < tas_fmw->nr_programs) {
- /*dsp mode or tuning mode*/
+ if (tas_fmw && tas_priv->cur_prog < tas_fmw->nr_programs) {
+ /* dsp mode or tuning mode */
profile_cfg_id = tas_priv->rcabin.profile_cfg_id;
tasdevice_select_tuningprm_cfg(tas_priv,
tas_priv->cur_prog, tas_priv->cur_conf,
@@ -2340,9 +2347,10 @@ void tasdevice_tuning_switch(void *context, int state)
tasdevice_select_cfg_blk(tas_priv, profile_cfg_id,
TASDEVICE_BIN_BLK_PRE_POWER_UP);
- } else
+ } else {
tasdevice_select_cfg_blk(tas_priv, profile_cfg_id,
TASDEVICE_BIN_BLK_PRE_SHUTDOWN);
+ }
}
EXPORT_SYMBOL_NS_GPL(tasdevice_tuning_switch,
SND_SOC_TAS2781_FMWLIB);
@@ -380,23 +380,32 @@ static void tasdevice_fw_ready(const struct firmware *fmw,
mutex_lock(&tas_priv->codec_lock);
ret = tasdevice_rca_parser(tas_priv, fmw);
- if (ret)
+ if (ret) {
+ tasdevice_config_info_remove(tas_priv);
goto out;
+ }
tasdevice_create_control(tas_priv);
tasdevice_dsp_remove(tas_priv);
tasdevice_calbin_remove(tas_priv);
- tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING;
+ tas_priv->fw_state = TASDEVICE_RCA_FW_OK;
scnprintf(tas_priv->coef_binaryname, 64, "%s_coef.bin",
tas_priv->dev_name);
ret = tasdevice_dsp_parser(tas_priv);
if (ret) {
dev_err(tas_priv->dev, "dspfw load %s error\n",
tas_priv->coef_binaryname);
- tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL;
goto out;
}
- tasdevice_dsp_create_ctrls(tas_priv);
+
+ /*
+ * If no dsp-related kcontrol created, the dsp resource will be freed.
+ */
+ ret = tasdevice_dsp_create_ctrls(tas_priv);
+ if (ret) {
+ dev_err(tas_priv->dev, "dsp controls error\n");
+ goto out;
+ }
tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK;
@@ -417,9 +426,8 @@ static void tasdevice_fw_ready(const struct firmware *fmw,
tasdevice_prmg_load(tas_priv, 0);
tas_priv->cur_prog = 0;
out:
- if (tas_priv->fw_state == TASDEVICE_DSP_FW_FAIL) {
- /*If DSP FW fail, kcontrol won't be created */
- tasdevice_config_info_remove(tas_priv);
+ if (tas_priv->fw_state == TASDEVICE_RCA_FW_OK) {
+ /* If DSP FW fail, DSP kcontrol won't be created. */
tasdevice_dsp_remove(tas_priv);
}
mutex_unlock(&tas_priv->codec_lock);
@@ -466,14 +474,14 @@ static int tasdevice_startup(struct snd_pcm_substream *substream,
{
struct snd_soc_component *codec = dai->component;
struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec);
- int ret = 0;
- if (tas_priv->fw_state != TASDEVICE_DSP_FW_ALL_OK) {
- dev_err(tas_priv->dev, "DSP bin file not loaded\n");
- ret = -EINVAL;
+ switch (tas_priv->fw_state) {
+ case TASDEVICE_RCA_FW_OK:
+ case TASDEVICE_DSP_FW_ALL_OK:
+ return 0;
+ default:
+ return -EINVAL;
}
-
- return ret;
}
static int tasdevice_hw_params(struct snd_pcm_substream *substream,
In only RCA (Reconfigurable Architecture) binary case, no DSP program will be working inside tas2563/tas2781, that is dsp-bypass mode, do not support speaker protection, and audio acoustic algorithms in this mode. Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver") Signed-off-by: Shenghao Ding <shenghao-ding@ti.com> --- v4: - add a description of what the state machine looks like. - Remove TASDEVICE_DSP_FW_NONE because of unused. - Remove stray change. - Fix broken indentation. v3: - Add description on RCA is Reconfigurable Architecture. - Add the description on enabling - Reword the commit - Remove question mark in the comments. - Add spaces in comments. v2: - Correct comment. - Add Fixes. - Move header file to the first. v1: - Split out the different logical changes into different patches. - rename tasdevice_dsp_fw_state -> tasdevice_fw_state, the fw are not only DSP fw, but also RCA(Reconfigurable data, such as acoustic data and register setting, etc). - Add TASDEVICE_RCA_FW_OK in tasdevice_fw_state to identify the state that only RCA binary file has been download successfully, but DSP fw is not loaded or loading failure. - Add the this strategy into tasdevice_tuning_switch. - If one side of the if/else has a braces both should in tasdevice_tuning_switch. - Identify whehter both RCA and DSP have been loaded or only RCA has been loaded in tasdevice_fw_ready. - Add check fw load status in tasdevice_startup. - remove ret in tasdevice_startup to make the code neater. --- include/sound/tas2781-dsp.h | 11 ++++++++-- sound/soc/codecs/tas2781-fmwlib.c | 18 +++++++++++----- sound/soc/codecs/tas2781-i2c.c | 34 +++++++++++++++++++------------ 3 files changed, 43 insertions(+), 20 deletions(-)