| Message ID | 20240628010715.438471-5-alexey.klimov@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | qrb4210-rb2: add HDMI audio playback support | expand |
On 28/06/2024 03:07, Alexey Klimov wrote: > Add apr (asynchronous packet router) node and its associated services > required to enable audio on QRB4210 RB2 platform. > Also, add an empty sound{} device node. This allows board dts > files to fill in required board specific properties. > > Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm6115.dtsi | 59 ++++++++++++++++++++++++++++ > 1 file changed, 59 insertions(+) Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Fri, Jun 28, 2024 at 02:07:12AM GMT, Alexey Klimov wrote: > Add apr (asynchronous packet router) node and its associated services > required to enable audio on QRB4210 RB2 platform. > Also, add an empty sound{} device node. This allows board dts > files to fill in required board specific properties. There is no sound {} node. LGTM otherwise. > > Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm6115.dtsi | 59 ++++++++++++++++++++++++++++ > 1 file changed, 59 insertions(+) >
On 28.06.2024 3:07 AM, Alexey Klimov wrote: > Add apr (asynchronous packet router) node and its associated services > required to enable audio on QRB4210 RB2 platform. > Also, add an empty sound{} device node. This allows board dts > files to fill in required board specific properties. > > Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index aca0a87092e4..c49aca3d0772 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/interconnect/qcom,sm6115.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/thermal/thermal.h> / { @@ -2695,6 +2696,64 @@ glink-edge { qcom,remote-pid = <2>; mboxes = <&apcs_glb 8>; + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1c1 0x0>; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + fastrpc { compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp";
Add apr (asynchronous packet router) node and its associated services required to enable audio on QRB4210 RB2 platform. Also, add an empty sound{} device node. This allows board dts files to fill in required board specific properties. Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> --- arch/arm64/boot/dts/qcom/sm6115.dtsi | 59 ++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+)