@@ -285,10 +285,6 @@ static void snd_mtpav_output_port_write(struct mtpav *mtp_card,
snd_mtpav_send_byte(mtp_card, 0xf5);
snd_mtpav_send_byte(mtp_card, portp->hwport);
- /*
- snd_printk(KERN_DEBUG "new outport: 0x%x\n",
- (unsigned int) portp->hwport);
- */
if (!(outbyte & 0x80) && portp->running_status)
snd_mtpav_send_byte(mtp_card, portp->running_status);
}
@@ -522,8 +518,6 @@ static void snd_mtpav_read_bytes(struct mtpav *mcrd)
u8 sbyt = snd_mtpav_getreg(mcrd, SREG);
- /* printk(KERN_DEBUG "snd_mtpav_read_bytes() sbyt: 0x%x\n", sbyt); */
-
if (!(sbyt & SIGS_BYTE))
return;
@@ -569,13 +563,13 @@ static int snd_mtpav_get_ISA(struct mtpav *mcard)
mcard->res_port = devm_request_region(mcard->card->dev, port, 3,
"MotuMTPAV MIDI");
if (!mcard->res_port) {
- snd_printk(KERN_ERR "MTVAP port 0x%lx is busy\n", port);
+ dev_err(mcard->card->dev, "MTVAP port 0x%lx is busy\n", port);
return -EBUSY;
}
mcard->port = port;
if (devm_request_irq(mcard->card->dev, irq, snd_mtpav_irqh, 0,
"MOTU MTPAV", mcard)) {
- snd_printk(KERN_ERR "MTVAP IRQ %d busy\n", irq);
+ dev_err(mcard->card->dev, "MTVAP IRQ %d busy\n", irq);
return -EBUSY;
}
mcard->irq = irq;
@@ -717,7 +711,9 @@ static int snd_mtpav_probe(struct platform_device *dev)
card->private_free = snd_mtpav_free;
platform_set_drvdata(dev, card);
- printk(KERN_INFO "Motu MidiTimePiece on parallel port irq: %d ioport: 0x%lx\n", irq, port);
+ dev_info(card->dev,
+ "Motu MidiTimePiece on parallel port irq: %d ioport: 0x%lx\n",
+ irq, port);
return 0;
}
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. The commented-out debug prints got removed, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> --- sound/drivers/mtpav.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-)