@@ -224,9 +224,9 @@ static void snd_uart16550_io_loop(struct snd_uart16550 * uart)
snd_rawmidi_receive(uart->midi_input[substream], &c, 1);
if (status & UART_LSR_OE)
- snd_printk(KERN_WARNING
- "%s: Overrun on device at 0x%lx\n",
- uart->rmidi->name, uart->base);
+ dev_warn(uart->card->dev,
+ "%s: Overrun on device at 0x%lx\n",
+ uart->rmidi->name, uart->base);
}
/* remember the last stream */
@@ -323,7 +323,8 @@ static int snd_uart16550_detect(struct snd_uart16550 *uart)
}
if (!devm_request_region(uart->card->dev, io_base, 8, "Serial MIDI")) {
- snd_printk(KERN_ERR "u16550: can't grab port 0x%lx\n", io_base);
+ dev_err(uart->card->dev,
+ "u16550: can't grab port 0x%lx\n", io_base);
return -EBUSY;
}
@@ -619,9 +620,9 @@ static int snd_uart16550_output_byte(struct snd_uart16550 *uart,
}
} else {
if (!snd_uart16550_write_buffer(uart, midi_byte)) {
- snd_printk(KERN_WARNING
- "%s: Buffer overrun on device at 0x%lx\n",
- uart->rmidi->name, uart->base);
+ dev_warn(uart->card->dev,
+ "%s: Buffer overrun on device at 0x%lx\n",
+ uart->rmidi->name, uart->base);
return 0;
}
}
@@ -775,15 +776,15 @@ static int snd_uart16550_create(struct snd_card *card,
err = snd_uart16550_detect(uart);
if (err <= 0) {
- printk(KERN_ERR "no UART detected at 0x%lx\n", iobase);
+ dev_err(card->dev, "no UART detected at 0x%lx\n", iobase);
return -ENODEV;
}
if (irq >= 0 && irq != SNDRV_AUTO_IRQ) {
if (devm_request_irq(card->dev, irq, snd_uart16550_interrupt,
0, "Serial MIDI", uart)) {
- snd_printk(KERN_WARNING
- "irq %d busy. Using Polling.\n", irq);
+ dev_warn(card->dev,
+ "irq %d busy. Using Polling.\n", irq);
} else {
uart->irq = irq;
}
@@ -879,23 +880,23 @@ static int snd_serial_probe(struct platform_device *devptr)
case SNDRV_SERIAL_GENERIC:
break;
default:
- snd_printk(KERN_ERR
- "Adaptor type is out of range 0-%d (%d)\n",
- SNDRV_SERIAL_MAX_ADAPTOR, adaptor[dev]);
+ dev_err(&devptr->dev,
+ "Adaptor type is out of range 0-%d (%d)\n",
+ SNDRV_SERIAL_MAX_ADAPTOR, adaptor[dev]);
return -ENODEV;
}
if (outs[dev] < 1 || outs[dev] > SNDRV_SERIAL_MAX_OUTS) {
- snd_printk(KERN_ERR
- "Count of outputs is out of range 1-%d (%d)\n",
- SNDRV_SERIAL_MAX_OUTS, outs[dev]);
+ dev_err(&devptr->dev,
+ "Count of outputs is out of range 1-%d (%d)\n",
+ SNDRV_SERIAL_MAX_OUTS, outs[dev]);
return -ENODEV;
}
if (ins[dev] < 1 || ins[dev] > SNDRV_SERIAL_MAX_INS) {
- snd_printk(KERN_ERR
- "Count of inputs is out of range 1-%d (%d)\n",
- SNDRV_SERIAL_MAX_INS, ins[dev]);
+ dev_err(&devptr->dev,
+ "Count of inputs is out of range 1-%d (%d)\n",
+ SNDRV_SERIAL_MAX_INS, ins[dev]);
return -ENODEV;
}
@@ -975,7 +976,7 @@ static int __init alsa_card_serial_init(void)
}
if (! cards) {
#ifdef MODULE
- printk(KERN_ERR "serial midi soundcard not found or device busy\n");
+ pr_err("serial midi soundcard not found or device busy\n");
#endif
snd_serial_unregister_all();
return -ENODEV;
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Signed-off-by: Takashi Iwai <tiwai@suse.de> --- sound/drivers/serial-u16550.c | 41 ++++++++++++++++++----------------- 1 file changed, 21 insertions(+), 20 deletions(-)