diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml
new file mode 100644
index 000000000000..cc5b48ceafa4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs4271.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS4271 audio CODEC
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+description:
+  The CS4271 is a stereo audio codec. This device supports both the I2C
+  and the SPI bus.
+
+allOf:
+  - $ref: dai-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: cirrus,cs4271
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  '#sound-dai-cells':
+    const: 0
+
+  reset-gpio:
+    description:
+      This pin will be deasserted before communication to the codec starts.
+    maxItems: 1
+
+  va-supply:
+    description: Analog power supply.
+
+  vd-supply:
+    description: Digital power supply.
+
+  vl-supply:
+    description: Serial Control Port power supply.
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+  cirrus,amuteb-eq-bmutec:
+    description:
+      When given, the Codec's AMUTEB=BMUTEC flag is enabled.
+    type: boolean
+
+  cirrus,enable-soft-reset:
+    description: |
+      The CS4271 requires its LRCLK and MCLK to be stable before its RESET
+      line is de-asserted. That also means that clocks cannot be changed
+      without putting the chip back into hardware reset, which also requires
+      a complete re-initialization of all registers.
+
+      One (undocumented) workaround is to assert and de-assert the PDN bit
+      in the MODE2 register. This workaround can be enabled with this DT
+      property.
+
+      Note that this is not needed in case the clocks are stable
+      throughout the entire runtime of the codec.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        cs4271@0 {
+            compatible = "cirrus,cs4271";
+            reg = <0>;
+            #sound-dai-cells = <0>;
+            spi-max-frequency = <6000000>;
+            spi-cpol;
+            spi-cpha;
+            reset-gpio = <&gpio0 1 GPIO_ACTIVE_LOW>;
+            port {
+                endpoint {
+                    remote-endpoint = <&i2s_ep>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/cs4271.txt b/Documentation/devicetree/bindings/sound/cs4271.txt
deleted file mode 100644
index 6e699ceabacd..000000000000
--- a/Documentation/devicetree/bindings/sound/cs4271.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Cirrus Logic CS4271 DT bindings
-
-This driver supports both the I2C and the SPI bus.
-
-Required properties:
-
- - compatible: "cirrus,cs4271"
-
-For required properties on SPI, please consult
-Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Required properties on I2C:
-
- - reg: the i2c address
-
-
-Optional properties:
-
- - reset-gpio: 	a GPIO spec to define which pin is connected to the chip's
-		!RESET pin
- - cirrus,amuteb-eq-bmutec:	When given, the Codec's AMUTEB=BMUTEC flag
-				is enabled.
- - cirrus,enable-soft-reset:
-	The CS4271 requires its LRCLK and MCLK to be stable before its RESET
-	line is de-asserted. That also means that clocks cannot be changed
-	without putting the chip back into hardware reset, which also requires
-	a complete re-initialization of all registers.
-
-	One (undocumented) workaround is to assert and de-assert the PDN bit
-	in the MODE2 register. This workaround can be enabled with this DT
-	property.
-
-	Note that this is not needed in case the clocks are stable
-	throughout the entire runtime of the codec.
-
- - vd-supply:	Digital power
- - vl-supply:	Logic power
- - va-supply:	Analog Power
-
-Examples:
-
-	codec_i2c: cs4271@10 {
-		compatible = "cirrus,cs4271";
-		reg = <0x10>;
-		reset-gpio = <&gpio 23 0>;
-		vd-supply = <&vdd_3v3_reg>;
-		vl-supply = <&vdd_3v3_reg>;
-		va-supply = <&vdd_3v3_reg>;
-	};
-
-	codec_spi: cs4271@0 {
-		compatible = "cirrus,cs4271";
-		reg = <0x0>;
-		reset-gpio = <&gpio 23 0>;
-		spi-max-frequency = <6000000>;
-	};
-
