@@ -156,6 +156,7 @@ struct qcom_swrm_port_config {
u8 word_length;
u8 blk_group_count;
u8 lane_control;
+ u8 ch_mask;
};
/*
@@ -1048,9 +1049,13 @@ static int qcom_swrm_port_enable(struct sdw_bus *bus,
{
u32 reg = SWRM_DP_PORT_CTRL_BANK(enable_ch->port_num, bank);
struct qcom_swrm_ctrl *ctrl = to_qcom_sdw(bus);
+ struct qcom_swrm_port_config *pcfg;
u32 val;
+ pcfg = &ctrl->pconfig[enable_ch->port_num];
ctrl->reg_read(ctrl, reg, &val);
+ if (pcfg->ch_mask != SWR_INVALID_PARAM && pcfg->ch_mask != 0)
+ enable_ch->ch_mask = pcfg->ch_mask;
if (enable_ch->enable)
val |= (enable_ch->ch_mask << SWRM_DP_PORT_CTRL_EN_CHAN_SHFT);
@@ -1270,6 +1275,27 @@ static void *qcom_swrm_get_sdw_stream(struct snd_soc_dai *dai, int direction)
return ctrl->sruntime[dai->id];
}
+static int qcom_swrm_set_channel_map(struct snd_soc_dai *dai,
+ unsigned int tx_num, unsigned int *tx_slot,
+ unsigned int rx_num, unsigned int *rx_slot)
+{
+ struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(dai->dev);
+ struct sdw_stream_runtime *sruntime = ctrl->sruntime[dai->id];
+ int i;
+
+ if (tx_slot) {
+ for (i = 0; i < tx_num; i++)
+ ctrl->pconfig[i].ch_mask = tx_slot[i];
+ }
+
+ if (rx_slot) {
+ for (i = 0; i < rx_num; i++)
+ ctrl->pconfig[i].ch_mask = rx_slot[i];
+ }
+
+ return 0;
+}
+
static int qcom_swrm_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
@@ -1306,6 +1332,7 @@ static const struct snd_soc_dai_ops qcom_swrm_pdm_dai_ops = {
.shutdown = qcom_swrm_shutdown,
.set_stream = qcom_swrm_set_sdw_stream,
.get_stream = qcom_swrm_get_sdw_stream,
+ .set_channel_map = qcom_swrm_set_channel_map,
};
static const struct snd_soc_component_driver qcom_swrm_dai_component = {
Added qcom_swrm_set_channel_map api to set the master channel mask for TX and RX paths based on the provided slots. Added a new field ch_mask to the qcom_swrm_port_config structure. This field is used to store the master channel mask, which allows more flexible to configure channel mask in runtime for specific active soundwire ports. Modified the qcom_swrm_port_enable function to configure master channel mask. If the ch_mask is set to SWR_INVALID_PARAM or is zero, the function will use the default channel mask. Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com> --- drivers/soundwire/qcom.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)