@@ -721,6 +721,10 @@ static const struct config_entry acpi_config_table[] = {
#if IS_ENABLED(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI) || \
IS_ENABLED(CONFIG_SND_SOC_SOF_BAYTRAIL)
/* BayTrail */
+ {
+ .flags = FLAG_SST_OR_SOF_BYT,
+ .acpi_hid = "LPE0F28",
+ },
{
.flags = FLAG_SST_OR_SOF_BYT,
.acpi_hid = "80860F28",
@@ -125,6 +125,28 @@ static const struct sst_res_info bytcr_res_info = {
.acpi_ipc_irq_index = 0
};
+/* For "LPE0F28" ACPI device found on some Android factory OS models */
+static const struct sst_res_info lpe8086_res_info = {
+ .shim_offset = 0x140000,
+ .shim_size = 0x000100,
+ .shim_phy_addr = SST_BYT_SHIM_PHY_ADDR,
+ .ssp0_offset = 0xa0000,
+ .ssp0_size = 0x1000,
+ .dma0_offset = 0x98000,
+ .dma0_size = 0x4000,
+ .dma1_offset = 0x9c000,
+ .dma1_size = 0x4000,
+ .iram_offset = 0x0c0000,
+ .iram_size = 0x14000,
+ .dram_offset = 0x100000,
+ .dram_size = 0x28000,
+ .mbox_offset = 0x144000,
+ .mbox_size = 0x1000,
+ .acpi_lpe_res_index = 1,
+ .acpi_ddr_index = 0,
+ .acpi_ipc_irq_index = 0
+};
+
static struct sst_platform_info byt_rvp_platform_data = {
.probe_data = &byt_fwparse_info,
.ipc_info = &byt_ipc_info,
@@ -268,10 +290,38 @@ static int sst_acpi_probe(struct platform_device *pdev)
mach->pdata = &chv_platform_data;
pdata = mach->pdata;
- ret = kstrtouint(id->id, 16, &dev_id);
- if (ret < 0) {
- dev_err(dev, "Unique device id conversion error: %d\n", ret);
- return ret;
+ if (!strcmp(id->id, "LPE0F28")) {
+ struct resource *rsrc;
+
+ /* Use regular BYT SST PCI VID:PID */
+ dev_id = 0x80860F28;
+ byt_rvp_platform_data.res_info = &lpe8086_res_info;
+
+ /*
+ * The "LPE0F28" ACPI device has separate IO-mem resources for:
+ * DDR, SHIM, MBOX, IRAM, DRAM, CFG
+ * None of which covers the entire LPE base address range.
+ * lpe8086_res_info.acpi_lpe_res_index points to the SHIM.
+ * Patch this to cover the entire base address range as expected
+ * by sst_platform_get_resources().
+ */
+ rsrc = platform_get_resource(pdev, IORESOURCE_MEM,
+ pdata->res_info->acpi_lpe_res_index);
+ if (!rsrc) {
+ dev_err(ctx->dev, "Invalid SHIM base\n");
+ return -EIO;
+ }
+ rsrc->start -= pdata->res_info->shim_offset;
+ rsrc->end = rsrc->start + 0x200000 - 1;
+ } else {
+ ret = kstrtouint(id->id, 16, &dev_id);
+ if (ret < 0) {
+ dev_err(dev, "Unique device id conversion error: %d\n", ret);
+ return ret;
+ }
+
+ if (soc_intel_is_byt_cr(pdev))
+ byt_rvp_platform_data.res_info = &bytcr_res_info;
}
dev_dbg(dev, "ACPI device id: %x\n", dev_id);
@@ -280,11 +330,6 @@ static int sst_acpi_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
- if (soc_intel_is_byt_cr(pdev)) {
- /* override resource info */
- byt_rvp_platform_data.res_info = &bytcr_res_info;
- }
-
/* update machine parameters */
mach->mach_params.acpi_ipc_irq_index =
pdata->res_info->acpi_ipc_irq_index;
@@ -344,6 +389,7 @@ static void sst_acpi_remove(struct platform_device *pdev)
}
static const struct acpi_device_id sst_acpi_ids[] = {
+ { "LPE0F28", (unsigned long)&snd_soc_acpi_intel_baytrail_machines},
{ "80860F28", (unsigned long)&snd_soc_acpi_intel_baytrail_machines},
{ "808622A8", (unsigned long)&snd_soc_acpi_intel_cherrytrail_machines},
{ },
Some old Bay Trail tablets which shipped with Android as factory OS have the SST/LPE audio engine described by an ACPI device with a HID (Hardware-ID) of LPE0F28 instead of 80860F28. Add support for this. Note this uses a new sst_res_info for just the LPE0F28 case because it has a different layout for the IO-mem ACPI resources then the 80860F28. An example of a tablet which needs this is the Vexia EDU ATLA 10 tablet, which has been distributed to schools in the Spanish Andalucía region. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- sound/hda/intel-dsp-config.c | 4 ++ sound/soc/intel/atom/sst/sst_acpi.c | 64 +++++++++++++++++++++++++---- 2 files changed, 59 insertions(+), 9 deletions(-)