@@ -3361,8 +3361,8 @@ lpfc_block_mgmt_io(struct lpfc_hba *phba, int mbx_action)
/* Determine how long we might wait for the active mailbox
* command to be gracefully completed by firmware.
*/
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
- phba->sli.mbox_active) * 1000) + jiffies;
+ timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba,
+ phba->sli.mbox_active)) + jiffies;
}
spin_unlock_irqrestore(&phba->hbalock, iflag);
@@ -5645,9 +5645,8 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
* cmd_flag is set to LPFC_DRIVER_ABORTED before we wait
* for abort to complete.
*/
- wait_event_timeout(waitq,
- (lpfc_cmd->pCmd != cmnd),
- msecs_to_jiffies(2*vport->cfg_devloss_tmo*1000));
+ wait_event_timeout(waitq, (lpfc_cmd->pCmd != cmnd),
+ secs_to_jiffies(2*vport->cfg_devloss_tmo));
spin_lock(&lpfc_cmd->buf_lock);
@@ -5911,7 +5910,7 @@ lpfc_chk_tgt_mapped(struct lpfc_vport *vport, struct fc_rport *rport)
* If target is not in a MAPPED state, delay until
* target is rediscovered or devloss timeout expires.
*/
- later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+ later = secs_to_jiffies(2 * vport->cfg_devloss_tmo) + jiffies;
while (time_after(later, jiffies)) {
if (!pnode)
return FAILED;
@@ -5957,7 +5956,7 @@ lpfc_reset_flush_io_context(struct lpfc_vport *vport, uint16_t tgt_id,
lpfc_sli_abort_taskmgmt(vport,
&phba->sli.sli3_ring[LPFC_FCP_RING],
tgt_id, lun_id, context);
- later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+ later = secs_to_jiffies(2 * vport->cfg_devloss_tmo) + jiffies;
while (time_after(later, jiffies) && cnt) {
schedule_timeout_uninterruptible(msecs_to_jiffies(20));
cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
@@ -6137,8 +6136,7 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
wait_event_timeout(waitq,
!test_bit(NLP_WAIT_FOR_LOGO,
&pnode->save_flags),
- msecs_to_jiffies(dev_loss_tmo *
- 1000));
+ secs_to_jiffies(dev_loss_tmo));
if (test_and_clear_bit(NLP_WAIT_FOR_LOGO,
&pnode->save_flags))
@@ -9504,8 +9504,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
goto out_not_finished;
}
/* timeout active mbox command */
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox) *
- 1000);
+ timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox));
mod_timer(&psli->mbox_tmo, jiffies + timeout);
}
@@ -9629,8 +9628,7 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
drvr_flag);
goto out_not_finished;
}
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox) *
- 1000) + jiffies;
+ timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox)) + jiffies;
i = 0;
/* Wait for command to complete */
while (((word0 & OWN_CHIP) == OWN_CHIP) ||
@@ -9756,9 +9754,8 @@ lpfc_sli4_async_mbox_block(struct lpfc_hba *phba)
* command to be gracefully completed by firmware.
*/
if (phba->sli.mbox_active)
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
- phba->sli.mbox_active) *
- 1000) + jiffies;
+ timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba,
+ phba->sli.mbox_active)) + jiffies;
spin_unlock_irq(&phba->hbalock);
/* Make sure the mailbox is really active */
@@ -9881,8 +9878,7 @@ lpfc_sli4_wait_bmbx_ready(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
}
}
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq)
- * 1000) + jiffies;
+ timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq)) + jiffies;
do {
bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
@@ -13159,7 +13155,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
retval = lpfc_sli_issue_iocb(phba, ring_number, piocb,
SLI_IOCB_RET_IOCB);
if (retval == IOCB_SUCCESS) {
- timeout_req = msecs_to_jiffies(timeout * 1000);
+ timeout_req = secs_to_jiffies(timeout);
timeleft = wait_event_timeout(done_q,
lpfc_chk_iocb_flg(phba, piocb, LPFC_IO_WAKE),
timeout_req);
@@ -13275,8 +13271,7 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq,
/* now issue the command */
retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
if (retval == MBX_BUSY || retval == MBX_SUCCESS) {
- wait_for_completion_timeout(&mbox_done,
- msecs_to_jiffies(timeout * 1000));
+ wait_for_completion_timeout(&mbox_done, secs_to_jiffies(timeout));
spin_lock_irqsave(&phba->hbalock, flag);
pmboxq->ctx_u.mbox_wait = NULL;
@@ -13336,9 +13331,8 @@ lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba, int mbx_action)
* command to be gracefully completed by firmware.
*/
if (phba->sli.mbox_active)
- timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
- phba->sli.mbox_active) *
- 1000) + jiffies;
+ timeout = secs_to_jiffies(lpfc_mbox_tmo_val(phba,
+ phba->sli.mbox_active)) + jiffies;
spin_unlock_irq(&phba->hbalock);
/* Enable softirqs again, done with phba->hbalock */
@@ -246,7 +246,7 @@ static void lpfc_discovery_wait(struct lpfc_vport *vport)
* fabric RA_TOV value and dev_loss tmo. The driver's
* devloss_tmo is 10 giving this loop a 3x multiplier minimally.
*/
- wait_time_max = msecs_to_jiffies(((phba->fc_ratov * 3) + 3) * 1000);
+ wait_time_max = secs_to_jiffies((phba->fc_ratov * 3) + 3);
wait_time_max += jiffies;
start_time = jiffies;
while (time_before(jiffies, wait_time_max)) {
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced secs_to_jiffies(). As the value here is a multiple of 1000, use secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication. This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with the following Coccinelle rules: @depends on patch@ expression E; @@ -msecs_to_jiffies +secs_to_jiffies (E - * \( 1000 \| MSEC_PER_SEC \) ) Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> --- drivers/scsi/lpfc/lpfc_init.c | 4 ++-- drivers/scsi/lpfc/lpfc_scsi.c | 12 +++++------- drivers/scsi/lpfc/lpfc_sli.c | 24 +++++++++--------------- drivers/scsi/lpfc/lpfc_vport.c | 2 +- 4 files changed, 17 insertions(+), 25 deletions(-)