[v2,5/5] ASoC: wm8904: add DMIC support

Commit Message

Francesco Dolcini Feb. 24, 2025, 3:55 p.m. UTC

From: Ernest Van Hoecke <[e-mail]>

The WM8904 codec supports both ADC and DMIC inputs.

Get input pin functionality from the platform data and add the necessary
controls depending on the possible additional routing.

The ADC and DMIC share the IN1L/DMICDAT1 and IN1R/DMICDAT2 pins.

This leads to a few scenarios requiring different DAPM routing:
- When both are connected to an analog input, only the ADC is used.
- When one line is a DMIC and the other an analog input, the DMIC source
  is set from the platform data and a mux is added to select whether to
  use the ADC or DMIC.
- When both are connected to a DMIC, another mux is added to this to
  select the DMIC source. Note that we still need to be able to select
  the ADC system for use with the IN2L, IN2R, IN3L and IN3R pins.

Signed-off-by: Ernest Van Hoecke <[e-mail]>
Signed-off-by: Francesco Dolcini <[e-mail]>
---
v2: DAPM routes have been reworked, please see the commit message body.
    The previous approach forgot that the ADC is still needed for the
    IN2L/R and IN3L/R pins, and did not properly disconnect the PGAs
    from the ADC when only the DMIC was in use.
v1: https://lore.kernel.org/lkml/[e-mail]/

Cc: [e-mail]
---
 sound/soc/codecs/wm8904.c | 125 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 120 insertions(+), 5 deletions(-)

Patch

diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 83cf59f6e879..ed717140ec76 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -844,6 +844,26 @@  static int out_pga_event(struct snd_soc_dapm_widget *w,
 	return 0;
 }
 
+static const char * const dmic_text[] = {
+	"DMIC1", "DMIC2"
+};
+
+static SOC_ENUM_SINGLE_DECL(dmic_enum, WM8904_DIGITAL_MICROPHONE_0,
+			    WM8904_DMIC_SRC_SHIFT, dmic_text);
+
+static const struct snd_kcontrol_new dmic_mux =
+	SOC_DAPM_ENUM("DMIC Mux", dmic_enum);
+
+static const char * const cin_text[] = {
+	"ADC", "DMIC"
+};
+
+static SOC_ENUM_SINGLE_DECL(cin_enum, WM8904_DIGITAL_MICROPHONE_0,
+			    WM8904_DMIC_ENA_SHIFT, cin_text);
+
+static const struct snd_kcontrol_new cin_mux =
+	SOC_DAPM_ENUM("Capture Input", cin_enum);
+
 static const char *input_mode_text[] = {
 	"Single-Ended", "Differential Line", "Differential Mic"
 };
@@ -963,6 +983,15 @@  SND_SOC_DAPM_AIF_OUT("AIFOUTL", "Capture", 0, SND_SOC_NOPM, 0, 0),
 SND_SOC_DAPM_AIF_OUT("AIFOUTR", "Capture", 1, SND_SOC_NOPM, 0, 0),
 };
 
+static const struct snd_soc_dapm_widget wm8904_dmic_dapm_widgets[] = {
+SND_SOC_DAPM_MUX("DMIC Mux", SND_SOC_NOPM, 0, 0, &dmic_mux),
+};
+
+static const struct snd_soc_dapm_widget wm8904_cin_dapm_widgets[] = {
+SND_SOC_DAPM_MUX("Left Capture Input", SND_SOC_NOPM, 0, 0, &cin_mux),
+SND_SOC_DAPM_MUX("Right Capture Input", SND_SOC_NOPM, 0, 0, &cin_mux),
+};
+
 static const struct snd_soc_dapm_widget wm8904_dac_dapm_widgets[] = {
 SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
 SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
@@ -1101,12 +1130,45 @@  static const struct snd_soc_dapm_route adc_intercon[] = {
 	{ "AIFOUTR", NULL, "AIFOUTR Mux" },
 
 	{ "ADCL", NULL, "CLK_DSP" },
-	{ "ADCL", NULL, "Left Capture PGA" },
-
 	{ "ADCR", NULL, "CLK_DSP" },
+};
+
+/* No DMICs, always connect PGAs */
+static const struct snd_soc_dapm_route cin_nodmic_con[] = {
+	{ "ADCL", NULL, "Left Capture PGA" },
 	{ "ADCR", NULL, "Right Capture PGA" },
 };
 
+/* DMIC system in use: mux between ADC and DMICDAT1, 2 or both */
+static const struct snd_soc_dapm_route cin_adc_dmic_con[] = {
+	{ "Left Capture Input", "ADC", "Left Capture PGA" },
+	{ "Right Capture Input", "ADC", "Right Capture PGA" },
+
+	{ "ADCL", NULL, "Left Capture Input" },
+	{ "ADCR", NULL, "Right Capture Input" },
+};
+
+/*  IN1L as DMICDAT1 */
+static const struct snd_soc_dapm_route cin_dmic1_con[] = {
+	{ "Left Capture Input", "DMIC", "IN1L" },
+	{ "Right Capture Input", "DMIC", "IN1L" },
+};
+
+/* IN1R as DMICDAT2 */
+static const struct snd_soc_dapm_route cin_dmic2_con[] = {
+	{ "Left Capture Input", "DMIC", "IN1R" },
+	{ "Right Capture Input", "DMIC", "IN1R" },
+};
+
+/* DMICDAT1 and DMICDAT2: mux between them, ADC still used for IN2 and IN3 */
+static const struct snd_soc_dapm_route cin_2dmics_con[] = {
+	{ "DMIC Mux", "DMIC1", "IN1L" },
+	{ "DMIC Mux", "DMIC2", "IN1R" },
+
+	{ "Left Capture Input", "DMIC", "DMIC Mux" },
+	{ "Right Capture Input", "DMIC", "DMIC Mux" },
+};
+
 static const struct snd_soc_dapm_route dac_intercon[] = {
 	{ "DACL Mux", "Left", "AIFINL" },
 	{ "DACL Mux", "Right", "AIFINR" },
@@ -2050,18 +2112,70 @@  static void wm8904_handle_retune_mobile_pdata(struct snd_soc_component *componen
 			"Failed to add ReTune Mobile control: %d\n", ret);
 }
 
+static void wm8904_handle_dmic_pdata(struct snd_soc_component *component)
+{
+	struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
+	struct wm8904_priv *wm8904 = snd_soc_component_get_drvdata(component);
+	struct wm8904_pdata *pdata = wm8904->pdata;
+	unsigned int dmic_src;
+
+	if (!pdata->in1l_as_dmicdat1 && !pdata->in1r_as_dmicdat2) {
+		snd_soc_dapm_add_routes(dapm, cin_nodmic_con,
+					ARRAY_SIZE(cin_nodmic_con));
+		snd_soc_component_update_bits(component, WM8904_DIGITAL_MICROPHONE_0,
+					      WM8904_DMIC_ENA_MASK, 0);
+		return;
+	}
+
+	/* Need a control and routing to switch between DMIC and ADC */
+	snd_soc_dapm_new_controls(dapm, wm8904_cin_dapm_widgets,
+				  ARRAY_SIZE(wm8904_cin_dapm_widgets));
+	snd_soc_dapm_add_routes(dapm, cin_adc_dmic_con,
+				ARRAY_SIZE(cin_adc_dmic_con));
+
+	if (pdata->in1l_as_dmicdat1 && pdata->in1r_as_dmicdat2) {
+		/* Need a control and routing to mux between DMICDAT1 and 2 */
+		dev_dbg(component->dev, "DMICDAT1 and DMICDAT2 in use\n");
+		snd_soc_dapm_new_controls(dapm, wm8904_dmic_dapm_widgets,
+					  ARRAY_SIZE(wm8904_dmic_dapm_widgets));
+		snd_soc_dapm_add_routes(dapm, cin_2dmics_con,
+					ARRAY_SIZE(cin_2dmics_con));
+		return;
+	}
+
+	/* Either DMICDAT1 or DMICDAT2 is in use, not both */
+	if (pdata->in1l_as_dmicdat1) {
+		dmic_src = 0;
+		snd_soc_dapm_add_routes(dapm, cin_dmic1_con,
+					ARRAY_SIZE(cin_dmic1_con));
+	} else {
+		dmic_src = 1;
+		snd_soc_dapm_add_routes(dapm, cin_dmic2_con,
+					ARRAY_SIZE(cin_dmic2_con));
+	}
+	dev_dbg(component->dev, "DMIC_SRC (0 or 1): %d\n", dmic_src);
+	snd_soc_component_update_bits(component, WM8904_DIGITAL_MICROPHONE_0,
+				      WM8904_DMIC_SRC_MASK,
+				      dmic_src << WM8904_DMIC_SRC_SHIFT);
+}
+
 static void wm8904_handle_pdata(struct snd_soc_component *component)
 {
+	struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
 	struct wm8904_priv *wm8904 = snd_soc_component_get_drvdata(component);
 	struct wm8904_pdata *pdata = wm8904->pdata;
 	int ret, i;
 
 	if (!pdata) {
+		snd_soc_dapm_add_routes(dapm, cin_nodmic_con,
+					ARRAY_SIZE(cin_nodmic_con));
 		snd_soc_add_component_controls(component, wm8904_eq_controls,
-				     ARRAY_SIZE(wm8904_eq_controls));
+					       ARRAY_SIZE(wm8904_eq_controls));
 		return;
 	}
 
+	wm8904_handle_dmic_pdata(component);
+
 	dev_dbg(component->dev, "%d DRC configurations\n", pdata->num_drc_cfgs);
 
 	if (pdata->num_drc_cfgs) {
@@ -2117,10 +2231,11 @@  static int wm8904_probe(struct snd_soc_component *component)
 		return -EINVAL;
 	}
 
-	wm8904_handle_pdata(component);
-
 	wm8904_add_widgets(component);
 
+	/* This can add dependent widgets, so it is done after add_widgets */
+	wm8904_handle_pdata(component);
+
 	return 0;
 }