[v1,05/13] ASoC: qcom: support bitclk and osrclk per i2s port

Commit Message

Srinivas Kandagatla May 15, 2015, 8:44 a.m. UTC

On 15/05/15 06:23, Kenneth Westfield wrote:
> On Wed, May 13, 2015 at 05:00:52AM -0700, Srinivas Kandagatla wrote:
>> This patch adds support to allow bitclk and osrclk per i2s dai port.
>> on APQ8016 there are 4 i2s ports each one has its own bit clks.
>>
>> Without this patch its not possible to support multiple i2s ports in the
>> lpass driver.
>
>> diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
>> index 5965667..0d28ea7 100644
>> --- a/sound/soc/qcom/lpass-cpu.c
>> +++ b/sound/soc/qcom/lpass-cpu.c
>> @@ -33,7 +33,7 @@ static int lpass_cpu_daiops_set_sysclk(struct
>> snd_soc_dai *dai, int clk_id,
>>   	struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
>>   	int ret;
>>
>> -	ret = clk_set_rate(drvdata->mi2s_osr_clk, freq);
>> +	ret = clk_set_rate(drvdata->mi2s_osr_clk[dai->driver->id], freq);
>>   	if (ret)
>>   		dev_err(dai->dev, "%s() error setting mi2s osrclk to %u:
>> %d\n",
>>   				__func__, freq, ret);
>
> Audio was broken on the Storm board with this patch series.  The issue
> has to do with the mismatch of the clock position in the array (which
> was 0) and the dai->driver->id (which was 4).  Basically, the position of
> the bit/osr clocks in their respective arrays need to match the MI2S
> port number, even if the port number doesn't start at the 0 position.
>
> I realize there are multiple ways to address this.  The quick solution I
> came up with (to get audio functioning again) was to change the DT clock
> entries for the ipq806x (see changes below for your reference).  The
> downside to the way I did this is, that now, there is no error-checking
> for clocks that should be in the DT but aren't there.
>
> Suggestions are welcome on how to best address this issue.
I think all we need to do is populate the correct index in the clk 
array. TBH I don't want to change any of ipq806x bindings.

I think the below fix should be the right one, actually I did think of 
doing this in v1 when I changed usage of dai->id to dai->driver->id , 
but some how I missed it.

Let me know your thoughts.
-----------------------><---------------------------------------------
         if (dsp_of_node) {
@@ -412,34 +412,36 @@ int asoc_qcom_lpass_cpu_platform_probe(struct 
platform_device *pdev)
                 variant->init(pdev);

         for (i = 0; i < variant->num_dai; i++) {
+               dai_id = variant->dai_driver[i].id;
                 if (variant->num_dai > 1)
                         sprintf(clk_name, "mi2s-osr-clk%d", i);
                 else
                         sprintf(clk_name, "mi2s-osr-clk");

-               drvdata->mi2s_osr_clk[i] = devm_clk_get(&pdev->dev,
+               drvdata->mi2s_osr_clk[dai_id] = devm_clk_get(&pdev->dev,
                                                                 clk_name);
-               if (IS_ERR(drvdata->mi2s_osr_clk[i])) {
+               if (IS_ERR(drvdata->mi2s_osr_clk[dai_id])) {
                         dev_err(&pdev->dev,
                                 "%s() error getting mi2s-osr-clk: %ld\n",
                                 __func__,
-                               PTR_ERR(drvdata->mi2s_osr_clk[i]));
+                               PTR_ERR(drvdata->mi2s_osr_clk[dai_id]));
                 }
         }

         for (i = 0; i < variant->num_dai; i++) {
+               dai_id = variant->dai_driver[i].id;

                 if (variant->num_dai > 1)
                         sprintf(clk_name, "mi2s-bit-clk%d", i);
                 else
                         sprintf(clk_name, "mi2s-bit-clk");

-               drvdata->mi2s_bit_clk[i] = devm_clk_get(&pdev->dev, 
clk_name);
-               if (IS_ERR(drvdata->mi2s_bit_clk[i])) {
+               drvdata->mi2s_bit_clk[dai_id] = devm_clk_get(&pdev->dev, 
clk_name);
+               if (IS_ERR(drvdata->mi2s_bit_clk[dai_id])) {
                         dev_err(&pdev->dev,
                                 "%s() error getting mi2s-bit-clk: %ld\n",
                                 __func__, 
PTR_ERR(drvdata->mi2s_bit_clk[i]));
-                       return PTR_ERR(drvdata->mi2s_bit_clk[i]);
+                       return PTR_ERR(drvdata->mi2s_bit_clk[dai_id]);
                 }
         }

-----------------------><---------------------------------------------

--srini
>
> -----------------------><---------------------------------------------
> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
> index 21c6483..2684a4f 100644
> --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
> +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
> @@ -8,8 +8,8 @@ Required properties:
>   - clocks		: Must contain an entry for each entry in clock-names.
>   - clock-names		: A list which must include the following entries:
>   				* "ahbix-clk"
> -				* "mi2s-osr-clk"
> -				* "mi2s-bit-clk"
> +				* "mi2s-osr-clk4"
> +				* "mi2s-bit-clk4"
>   			: required clocks for "qcom,lpass-cpu-apq8016"
>   				* "ahbix-clk"
>   				* "mi2s-bit-clk0"
> @@ -42,7 +42,7 @@ Example:
>   lpass@28100000 {
>   	compatible = "qcom,lpass-cpu";
>   	clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
> -	clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
> +	clock-names = "ahbix-clk", "mi2s-osr-clk4", "mi2s-bit-clk4";
>   	interrupts = <0 85 1>;
>   	interrupt-names = "lpass-irq-lpaif";
>   	pinctrl-names = "default", "idle";
> diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> index 5a13366..090984f 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> @@ -189,8 +189,8 @@
>   					<&lcc MI2S_OSR_CLK>,
>   					<&lcc MI2S_BIT_CLK>;
>   			clock-names = "ahbix-clk",
> -					"mi2s-osr-clk",
> -					"mi2s-bit-clk";
> +					"mi2s-osr-clk4",
> +					"mi2s-bit-clk4";
>   			interrupts = <0 85 1>;
>   			interrupt-names = "lpass-irq-lpaif";
>   			reg = <0x28100000 0x10000>;
> diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
> index 5053629..7b66e52 100644
> --- a/sound/soc/qcom/lpass-cpu.c
> +++ b/sound/soc/qcom/lpass-cpu.c
> @@ -411,11 +411,8 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev)
>   	if (variant->init)
>   		variant->init(pdev);
>
> -	for (i = 0; i < variant->num_dai; i++) {
> -		if (variant->num_dai > 1)
> -			sprintf(clk_name, "mi2s-osr-clk%d", i);
> -		else
> -			sprintf(clk_name, "mi2s-osr-clk");
> +	for (i = 0; i < LPASS_MAX_MI2S_PORTS; i++) {
> +		sprintf(clk_name, "mi2s-osr-clk%d", i);
>
>   		drvdata->mi2s_osr_clk[i] = devm_clk_get(&pdev->dev,
>   								clk_name);
> @@ -427,19 +424,14 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev)
>   		}
>   	}
>
> -	for (i = 0; i < variant->num_dai; i++) {
> -
> -		if (variant->num_dai > 1)
> -			sprintf(clk_name, "mi2s-bit-clk%d", i);
> -		else
> -			sprintf(clk_name, "mi2s-bit-clk");
> +	for (i = 0; i < LPASS_MAX_MI2S_PORTS; i++) {
> +		sprintf(clk_name, "mi2s-bit-clk%d", i);
>
>   		drvdata->mi2s_bit_clk[i] = devm_clk_get(&pdev->dev, clk_name);
>   		if (IS_ERR(drvdata->mi2s_bit_clk[i])) {
>   			dev_err(&pdev->dev,
>   				"%s() error getting mi2s-bit-clk: %ld\n",
>   				__func__, PTR_ERR(drvdata->mi2s_bit_clk[i]));
> -			return PTR_ERR(drvdata->mi2s_bit_clk[i]);
>   		}
>   	}
> -----------------------><---------------------------------------------
>

Patch

diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index 33e28370..64620ce 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -365,7 +365,7 @@  int asoc_qcom_lpass_cpu_platform_probe(struct 
platform_device *pdev)
         struct device *dev = &pdev->dev;
         const struct of_device_id *match;
         char clk_name[16];
-       int ret, i;
+       int ret, i, dai_id;

         dsp_of_node = of_parse_phandle(pdev->dev.of_node, "qcom,adsp", 0);