@@ -48,12 +48,15 @@
* Support for Solo/2i2 Gen 3 added in May 2021 (thanks to Alexander
* Vorona for 2i2 protocol traces).
*
+ * Support for phantom power added in May 2021.
+ *
* This ALSA mixer gives access to (model-dependent):
* - input, output, mixer-matrix muxes
* - mixer-matrix gain stages
* - gain/volume/mute controls
* - level meters
* - line/inst level, pad, and air controls
+ * - phantom power controls
* - disable/enable MSD mode
*
* <ditaa>
@@ -174,6 +177,7 @@ static const u16 scarlett2_mixer_values[SCARLETT2_MIXER_VALUE_COUNT] = {
#define SCARLETT2_LEVEL_SWITCH_MAX 2
#define SCARLETT2_PAD_SWITCH_MAX 8
#define SCARLETT2_AIR_SWITCH_MAX 8
+#define SCARLETT2_PHANTOM_SWITCH_MAX 2
/* Maximum number of inputs to the mixer */
#define SCARLETT2_INPUT_MIX_MAX 25
@@ -328,6 +332,12 @@ struct scarlett2_device_info {
*/
u8 air_input_count;
+ /* the number of phantom (48V) software switchable controls */
+ u8 phantom_count;
+
+ /* the number of inputs each phantom switch controls */
+ u8 inputs_per_phantom;
+
/* additional description for the line out volume controls */
const char * const line_out_descrs[SCARLETT2_ANALOGUE_MAX];
@@ -364,6 +374,8 @@ struct scarlett2_data {
u8 pad_switch[SCARLETT2_PAD_SWITCH_MAX];
u8 dim_mute[SCARLETT2_DIM_MUTE_COUNT];
u8 air_switch[SCARLETT2_AIR_SWITCH_MAX];
+ u8 phantom_switch[SCARLETT2_PHANTOM_SWITCH_MAX];
+ u8 phantom_persistence;
u8 msd_switch;
struct snd_kcontrol *sync_ctl;
struct snd_kcontrol *master_vol_ctl;
@@ -373,6 +385,7 @@ struct scarlett2_data {
struct snd_kcontrol *level_ctls[SCARLETT2_LEVEL_SWITCH_MAX];
struct snd_kcontrol *pad_ctls[SCARLETT2_PAD_SWITCH_MAX];
struct snd_kcontrol *air_ctls[SCARLETT2_AIR_SWITCH_MAX];
+ struct snd_kcontrol *phantom_ctls[SCARLETT2_PHANTOM_SWITCH_MAX];
u8 mux[SCARLETT2_MUX_MAX];
u8 mix[SCARLETT2_INPUT_MIX_MAX * SCARLETT2_OUTPUT_MIX_MAX];
};
@@ -535,6 +548,8 @@ static const struct scarlett2_device_info solo_gen3_info = {
.level_input_count = 1,
.level_input_first = 1,
.air_input_count = 1,
+ .phantom_count = 1,
+ .inputs_per_phantom = 1,
};
static const struct scarlett2_device_info s2i2_gen3_info = {
@@ -543,6 +558,8 @@ static const struct scarlett2_device_info s2i2_gen3_info = {
.has_msd_mode = 1,
.level_input_count = 2,
.air_input_count = 2,
+ .phantom_count = 1,
+ .inputs_per_phantom = 2,
};
static const struct scarlett2_device_info s4i4_gen3_info = {
@@ -553,6 +570,8 @@ static const struct scarlett2_device_info s4i4_gen3_info = {
.level_input_count = 2,
.pad_input_count = 2,
.air_input_count = 2,
+ .phantom_count = 1,
+ .inputs_per_phantom = 2,
.line_out_descrs = {
"Monitor L",
@@ -597,6 +616,8 @@ static const struct scarlett2_device_info s8i6_gen3_info = {
.level_input_count = 2,
.pad_input_count = 2,
.air_input_count = 2,
+ .phantom_count = 1,
+ .inputs_per_phantom = 2,
.line_out_descrs = {
"Headphones 1 L",
@@ -649,6 +670,8 @@ static const struct scarlett2_device_info s18i8_gen3_info = {
.level_input_count = 2,
.pad_input_count = 2,
.air_input_count = 4,
+ .phantom_count = 2,
+ .inputs_per_phantom = 2,
.line_out_descrs = {
"Monitor L",
@@ -713,6 +736,8 @@ static const struct scarlett2_device_info s18i20_gen3_info = {
.level_input_count = 2,
.pad_input_count = 8,
.air_input_count = 8,
+ .phantom_count = 2,
+ .inputs_per_phantom = 4,
.line_out_descrs = {
"Monitor 1 L",
@@ -861,7 +886,9 @@ enum {
SCARLETT2_CONFIG_PAD_SWITCH = 5,
SCARLETT2_CONFIG_MSD_SWITCH = 6,
SCARLETT2_CONFIG_AIR_SWITCH = 7,
- SCARLETT2_CONFIG_COUNT = 8
+ SCARLETT2_CONFIG_PHANTOM_SWITCH = 8,
+ SCARLETT2_CONFIG_PHANTOM_PERSISTENCE = 9,
+ SCARLETT2_CONFIG_COUNT = 10
};
/* Location, size, and activation command number for the configuration
@@ -884,6 +911,12 @@ static const struct scarlett2_config
[SCARLETT2_CONFIG_MSD_SWITCH] = {
.offset = 0x04, .size = 8, .activate = 6 },
+ [SCARLETT2_CONFIG_PHANTOM_PERSISTENCE] = {
+ .offset = 0x05, .size = 8, .activate = 6 },
+
+ [SCARLETT2_CONFIG_PHANTOM_SWITCH] = {
+ .offset = 0x06, .size = 8, .activate = 3 },
+
[SCARLETT2_CONFIG_LEVEL_SWITCH] = {
.offset = 0x08, .size = 1, .activate = 7 },
@@ -913,8 +946,14 @@ static const struct scarlett2_config
[SCARLETT2_CONFIG_AIR_SWITCH] = {
.offset = 0x8c, .size = 8, .activate = 8 },
+ [SCARLETT2_CONFIG_PHANTOM_SWITCH] = {
+ .offset = 0x9c, .size = 1, .activate = 8 },
+
[SCARLETT2_CONFIG_MSD_SWITCH] = {
.offset = 0x9d, .size = 8, .activate = 6 },
+
+ [SCARLETT2_CONFIG_PHANTOM_PERSISTENCE] = {
+ .offset = 0x9e, .size = 8, .activate = 6 },
} };
/* proprietary request/response format */
@@ -1927,6 +1966,20 @@ static int scarlett2_update_input_other(struct usb_mixer_interface *mixer)
return err;
}
+ if (info->phantom_count) {
+ int err = scarlett2_usb_get_config(
+ mixer, SCARLETT2_CONFIG_PHANTOM_SWITCH,
+ info->phantom_count, private->phantom_switch);
+ if (err < 0)
+ return err;
+
+ err = scarlett2_usb_get_config(
+ mixer, SCARLETT2_CONFIG_PHANTOM_PERSISTENCE,
+ 1, &private->phantom_persistence);
+ if (err < 0)
+ return err;
+ }
+
return 0;
}
@@ -2112,6 +2165,111 @@ static const struct snd_kcontrol_new scarlett2_air_ctl = {
.put = scarlett2_air_ctl_put,
};
+/*** Phantom Switch Controls ***/
+
+static int scarlett2_phantom_ctl_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_data *private = mixer->private_data;
+
+ mutex_lock(&private->data_mutex);
+ if (private->input_other_updated)
+ scarlett2_update_input_other(mixer);
+ ucontrol->value.integer.value[0] =
+ private->phantom_switch[elem->control];
+ mutex_unlock(&private->data_mutex);
+
+ return 0;
+}
+
+static int scarlett2_phantom_ctl_put(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_data *private = mixer->private_data;
+
+ int index = elem->control;
+ int oval, val, err = 0;
+
+ mutex_lock(&private->data_mutex);
+
+ oval = private->phantom_switch[index];
+ val = !!ucontrol->value.integer.value[0];
+
+ if (oval == val)
+ goto unlock;
+
+ private->phantom_switch[index] = val;
+
+ /* Send switch change to the device */
+ err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_PHANTOM_SWITCH,
+ index, val);
+
+unlock:
+ mutex_unlock(&private->data_mutex);
+ return err;
+}
+
+static const struct snd_kcontrol_new scarlett2_phantom_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "",
+ .info = snd_ctl_boolean_mono_info,
+ .get = scarlett2_phantom_ctl_get,
+ .put = scarlett2_phantom_ctl_put,
+};
+
+/*** Phantom Persistence Control ***/
+
+static int scarlett2_phantom_persistence_ctl_get(
+ struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct scarlett2_data *private = elem->head.mixer->private_data;
+
+ ucontrol->value.integer.value[0] = private->phantom_persistence;
+ return 0;
+}
+
+static int scarlett2_phantom_persistence_ctl_put(
+ struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_data *private = mixer->private_data;
+
+ int index = elem->control;
+ int oval, val, err = 0;
+
+ mutex_lock(&private->data_mutex);
+
+ oval = private->phantom_persistence;
+ val = !!ucontrol->value.integer.value[0];
+
+ if (oval == val)
+ goto unlock;
+
+ private->phantom_persistence = val;
+
+ /* Send switch change to the device */
+ err = scarlett2_usb_set_config(
+ mixer, SCARLETT2_CONFIG_PHANTOM_PERSISTENCE, index, val);
+
+unlock:
+ mutex_unlock(&private->data_mutex);
+ return err;
+}
+
+static const struct snd_kcontrol_new scarlett2_phantom_persistence_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "",
+ .info = snd_ctl_boolean_mono_info,
+ .get = scarlett2_phantom_persistence_ctl_get,
+ .put = scarlett2_phantom_persistence_ctl_put,
+};
+
/*** Dim/Mute Controls ***/
static int scarlett2_dim_mute_ctl_get(struct snd_kcontrol *kctl,
@@ -2275,6 +2433,7 @@ static int scarlett2_add_line_in_ctls(struct usb_mixer_interface *mixer)
int err, i;
char s[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
const char *fmt = "Line In %d %s Capture %s";
+ const char *fmt2 = "Line In %d-%d %s Capture %s";
/* Add input level (line/inst) controls */
for (i = 0; i < info->level_input_count; i++) {
@@ -2304,6 +2463,39 @@ static int scarlett2_add_line_in_ctls(struct usb_mixer_interface *mixer)
return err;
}
+ /* Add input phantom controls */
+ if (info->inputs_per_phantom == 1) {
+ for (i = 0; i < info->phantom_count; i++) {
+ snprintf(s, sizeof(s), fmt, i + 1,
+ "Phantom Power", "Switch");
+ err = scarlett2_add_new_ctl(
+ mixer, &scarlett2_phantom_ctl,
+ i, 1, s, &private->phantom_ctls[i]);
+ if (err < 0)
+ return err;
+ }
+ } else if (info->inputs_per_phantom > 1) {
+ for (i = 0; i < info->phantom_count; i++) {
+ int from = i * info->inputs_per_phantom + 1;
+ int to = (i + 1) * info->inputs_per_phantom;
+
+ snprintf(s, sizeof(s), fmt2, from, to,
+ "Phantom Power", "Switch");
+ err = scarlett2_add_new_ctl(
+ mixer, &scarlett2_phantom_ctl,
+ i, 1, s, &private->phantom_ctls[i]);
+ if (err < 0)
+ return err;
+ }
+ }
+ if (info->phantom_count) {
+ err = scarlett2_add_new_ctl(
+ mixer, &scarlett2_phantom_persistence_ctl, 0, 1,
+ "Phantom Power Persistence Capture Switch", NULL);
+ if (err < 0)
+ return err;
+ }
+
return 0;
}
@@ -2932,6 +3124,9 @@ static void scarlett2_notify_input_other(
for (i = 0; i < info->air_input_count; i++)
snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
&private->air_ctls[i]->id);
+ for (i = 0; i < info->phantom_count; i++)
+ snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &private->phantom_ctls[i]->id);
}
/* Interrupt callback */