ASoC: ak4613: add single-end optional property for IN/OUT pins

Commit Message

Kuninori Morimoto Nov. 13, 2015, 5:12 a.m. UTC

From: Kuninori Morimoto <[e-mail]>

ak4613 IN/OUT pin can be selected as differential/single-end.
Differential is default, because it is register default settings.

Signed-off-by: Kuninori Morimoto <[e-mail]>
---
 Documentation/devicetree/bindings/sound/ak4613.txt | 10 ++++++++
 sound/soc/codecs/ak4613.c                          | 29 ++++++++++++++++++++++
 2 files changed, 39 insertions(+)

Comments

Lars-Peter Clausen Nov. 13, 2015, 10:06 a.m. UTC | #1

On 11/13/2015 06:12 AM, Kuninori Morimoto wrote:
> From: Kuninori Morimoto <[e-mail]>
> 
> ak4613 IN/OUT pin can be selected as differential/single-end.
> Differential is default, because it is register default settings.
> 
> Signed-off-by: Kuninori Morimoto <[e-mail]>
> ---
>  Documentation/devicetree/bindings/sound/ak4613.txt | 10 ++++++++
>  sound/soc/codecs/ak4613.c                          | 29 ++++++++++++++++++++++
>  2 files changed, 39 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/ak4613.txt b/Documentation/devicetree/bindings/sound/ak4613.txt
> index 15a9195..392b5b5 100644
> --- a/Documentation/devicetree/bindings/sound/ak4613.txt
> +++ b/Documentation/devicetree/bindings/sound/ak4613.txt
> @@ -7,6 +7,16 @@ Required properties:
>  - compatible : "asahi-kasei,ak4613"
>  - reg : The chip select number on the I2C bus
>  
> +Optional properties:
> +- in1-single-end	: Boolean. Indicate input / output pins are single-ended.
> +- in2-single-end	  rather than differential.
> +- out1-single-end
> +- out2-single-end
> +- out3-single-end
> +- out4-single-end
> +- out5-single-end
> +- out6-single-end

vendor prefix?

Patch

diff --git a/Documentation/devicetree/bindings/sound/ak4613.txt b/Documentation/devicetree/bindings/sound/ak4613.txt
index 15a9195..392b5b5 100644
--- a/Documentation/devicetree/bindings/sound/ak4613.txt
+++ b/Documentation/devicetree/bindings/sound/ak4613.txt
@@ -7,6 +7,16 @@  Required properties:
 - compatible : "asahi-kasei,ak4613"
 - reg : The chip select number on the I2C bus
 
+Optional properties:
+- in1-single-end	: Boolean. Indicate input / output pins are single-ended.
+- in2-single-end	  rather than differential.
+- out1-single-end
+- out2-single-end
+- out3-single-end
+- out4-single-end
+- out5-single-end
+- out6-single-end
+
 Example:
 
 &i2c {
diff --git a/sound/soc/codecs/ak4613.c b/sound/soc/codecs/ak4613.c
index 07a2664..7dc01fe 100644
--- a/sound/soc/codecs/ak4613.c
+++ b/sound/soc/codecs/ak4613.c
@@ -79,6 +79,8 @@  struct ak4613_priv {
 
 	unsigned int fmt;
 	u8 fmt_ctrl;
+	u8 oc;
+	u8 ic;
 	int cnt;
 };
 
@@ -343,6 +345,9 @@  static int ak4613_dai_hw_params(struct snd_pcm_substream *substream,
 	snd_soc_update_bits(codec, CTRL1, FMT_MASK, fmt_ctrl);
 	snd_soc_write(codec, CTRL2, ctrl2);
 
+	snd_soc_write(codec, ICTRL, priv->ic);
+	snd_soc_write(codec, OCTRL, priv->oc);
+
 hw_params_end:
 	if (ret < 0)
 		dev_warn(dev, "unsupported data width/format combination\n");
@@ -431,6 +436,28 @@  static struct snd_soc_codec_driver soc_codec_dev_ak4613 = {
 	.num_dapm_routes	= ARRAY_SIZE(ak4613_intercon),
 };
 
+static void ak4613_parse_of(struct ak4613_priv *priv,
+			    struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	char prop[32];
+	int i;
+
+	/* Input 1 - 2 */
+	for (i = 0; i < 2; i++) {
+		snprintf(prop, sizeof(prop), "in%d-single-end", i + 1);
+		if (!of_get_property(np, prop, NULL))
+			priv->ic |= 1 << i;
+	}
+
+	/* Output 1 - 6 */
+	for (i = 0; i < 6; i++) {
+		snprintf(prop, sizeof(prop), "out%d-single-end", i + 1);
+		if (!of_get_property(np, prop, NULL))
+			priv->oc |= 1 << i;
+	}
+}
+
 static int ak4613_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
@@ -458,6 +485,8 @@  static int ak4613_i2c_probe(struct i2c_client *i2c,
 	if (!priv)
 		return -ENOMEM;
 
+	ak4613_parse_of(priv, dev);
+
 	priv->fmt_ctrl		= NO_FMT;
 	priv->cnt		= 0;