@@ -1545,6 +1545,11 @@ config SND_SOC_RL6231
default m if SND_SOC_RT1305=m
default m if SND_SOC_RT1308=m
+config SND_SOC_RT_SDW_COMMON
+ tristate
+ default y if SND_SOC_RT721_SDCA_SDW=y
+ default m if SND_SOC_RT721_SDCA_SDW=m
+
config SND_SOC_RL6347A
tristate
default y if SND_SOC_RT274=y
@@ -216,6 +216,7 @@ snd-soc-rk3308-y := rk3308_codec.o
snd-soc-rk3328-y := rk3328_codec.o
snd-soc-rk817-y := rk817_codec.o
snd-soc-rl6231-y := rl6231.o
+snd-soc-rt-sdw-common-y := rt-sdw-common.o
snd-soc-rl6347a-y := rl6347a.o
snd-soc-rt1011-y := rt1011.o
snd-soc-rt1015-y := rt1015.o
@@ -618,6 +619,7 @@ obj-$(CONFIG_SND_SOC_RK3308) += snd-soc-rk3308.o
obj-$(CONFIG_SND_SOC_RK3328) += snd-soc-rk3328.o
obj-$(CONFIG_SND_SOC_RK817) += snd-soc-rk817.o
obj-$(CONFIG_SND_SOC_RL6231) += snd-soc-rl6231.o
+obj-$(CONFIG_SND_SOC_RT_SDW_COMMON) += snd-soc-rt-sdw-common.o
obj-$(CONFIG_SND_SOC_RL6347A) += snd-soc-rl6347a.o
obj-$(CONFIG_SND_SOC_RT1011) += snd-soc-rt1011.o
obj-$(CONFIG_SND_SOC_RT1015) += snd-soc-rt1015.o
new file mode 100644
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// rt-sdw-common.c
+//
+// Copyright(c) 2024 Realtek Semiconductor Corp.
+//
+
+/*
+ * This file defines common functions used with Realtek soundwire codecs.
+ */
+
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include <linux/soundwire/sdw_registers.h>
+#include <sound/jack.h>
+
+#include "rt-sdw-common.h"
+
+/**
+ * rt_sdca_index_write - Write a value to Realtek defined register.
+ *
+ * @map: map for setting.
+ * @nid: Realtek-defined ID.
+ * @reg: register.
+ * @value: value.
+ *
+ * A value of zero will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+int rt_sdca_index_write(struct regmap *map, unsigned int nid,
+ unsigned int reg, unsigned int value)
+{
+ unsigned int addr = (nid << 20) | reg;
+ int ret;
+
+ ret = regmap_write(map, addr, value);
+ if (ret < 0)
+ pr_err("Failed to set value: %06x <= %04x ret=%d\n",
+ addr, value, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(rt_sdca_index_write);
+
+/**
+ * rt_sdca_index_read - Read value from Realtek defined register.
+ *
+ * @map: map for setting.
+ * @nid: Realtek-defined ID.
+ * @reg: register.
+ * @value: value.
+ *
+ * A value of zero will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+int rt_sdca_index_read(struct regmap *map, unsigned int nid,
+ unsigned int reg, unsigned int *value)
+{
+ unsigned int addr = (nid << 20) | reg;
+ int ret;
+
+ ret = regmap_read(map, addr, value);
+ if (ret < 0)
+ pr_err("Failed to get value: %06x => %04x ret=%d\n",
+ addr, *value, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(rt_sdca_index_read);
+
+/**
+ * rt_sdca_index_update_bits - Update value on Realtek defined register.
+ *
+ * @map: map for setting.
+ * @nid: Realtek-defined ID.
+ * @reg: register.
+ * @mask: Bitmask to change
+ * @value: New value for bitmask
+ *
+ * A value of zero will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+
+int rt_sdca_index_update_bits(struct regmap *map,
+ unsigned int nid, unsigned int reg, unsigned int mask, unsigned int val)
+{
+ unsigned int tmp;
+ int ret;
+
+ ret = rt_sdca_index_read(map, nid, reg, &tmp);
+ if (ret < 0)
+ return ret;
+
+ set_mask_bits(&tmp, mask, val);
+ return rt_sdca_index_write(map, nid, reg, tmp);
+}
+EXPORT_SYMBOL_GPL(rt_sdca_index_update_bits);
+
+/**
+ * rt_sdca_btn_type - Decision of button type.
+ *
+ * @buffer: UMP message buffer.
+ *
+ * A button type will be returned regarding to buffer,
+ * it returns zero if buffer cannot be recognized.
+ */
+int rt_sdca_btn_type(unsigned char *buffer)
+{
+ u8 btn_type = 0;
+ int ret;
+
+ btn_type |= buffer[0] & 0xf;
+ btn_type |= (buffer[0] >> 4) & 0xf;
+ btn_type |= buffer[1] & 0xf;
+ btn_type |= (buffer[1] >> 4) & 0xf;
+
+ if (btn_type & BIT(0))
+ ret |= SND_JACK_BTN_2;
+ if (btn_type & BIT(1))
+ ret |= SND_JACK_BTN_3;
+ if (btn_type & BIT(2))
+ ret |= SND_JACK_BTN_0;
+ if (btn_type & BIT(3))
+ ret |= SND_JACK_BTN_1;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(rt_sdca_btn_type);
+
+/**
+ * rt_sdca_headset_detect - Headset jack type detection.
+ *
+ * @map: map for setting.
+ * @entity_id: SDCA entity ID.
+ *
+ * A headset jack type will be returned, a negative errno will
+ * be returned in error cases.
+ */
+int rt_sdca_headset_detect(struct regmap *map, unsigned int entity_id)
+{
+ unsigned int det_mode, jack_type;
+ int ret;
+
+ /* get detected_mode */
+ ret = regmap_read(map, SDW_SDCA_CTL(SDCA_NUM_JACK_CODEC, entity_id,
+ RT_SDCA_CTL_DETECTED_MODE, 0), &det_mode);
+
+ if (ret < 0)
+ goto io_error;
+
+ switch (det_mode) {
+ case 0x00:
+ jack_type = 0;
+ break;
+ case 0x03:
+ jack_type = SND_JACK_HEADPHONE;
+ break;
+ case 0x05:
+ jack_type = SND_JACK_HEADSET;
+ break;
+ }
+
+ /* write selected_mode */
+ if (det_mode) {
+ ret = regmap_write(map, SDW_SDCA_CTL(SDCA_NUM_JACK_CODEC, entity_id,
+ RT_SDCA_CTL_SELECTED_MODE, 0), det_mode);
+ if (ret < 0)
+ goto io_error;
+ }
+
+ return jack_type;
+
+io_error:
+ pr_err_ratelimited("IO error in %s, ret %d\n", __func__, ret);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(rt_sdca_headset_detect);
+
+/**
+ * rt_sdca_button_detect - Read UMP message and decide button type.
+ *
+ * @map: map for setting.
+ * @entity_id: SDCA entity ID.
+ * @hid_buf_addr: HID buffer address.
+ * @hid_id: Report ID for HID.
+ * @mask1: Mask for button message.
+ * @mask2: Mask for button message.
+ *
+ * A button type will be returned regarding to buffer,
+ * it returns zero if buffer cannot be recognized.
+ */
+int rt_sdca_button_detect(struct regmap *map, unsigned int entity_id,
+ unsigned int hid_buf_addr, unsigned int hid_id,
+ unsigned int mask1, unsigned int mask2)
+{
+ unsigned int btn_type = 0, offset, idx, val, owner;
+ unsigned char buf[3];
+ int ret;
+
+ /* get current UMP message owner */
+ ret = regmap_read(map, SDW_SDCA_CTL(SDCA_NUM_HID, entity_id,
+ RT_SDCA_CTL_HIDTX_CURRENT_OWNER, 0), &owner);
+ if (ret < 0)
+ return 0;
+
+ /* if owner is device then there is no button event from device */
+ if (owner == 1)
+ return 0;
+
+ /* read UMP message offset */
+ ret = regmap_read(map, SDW_SDCA_CTL(SDCA_NUM_HID, entity_id,
+ RT_SDCA_CTL_HIDTX_MESSAGE_OFFSET, 0), &offset);
+ if (ret < 0)
+ goto _end_btn_det_;
+
+ for (idx = 0; idx < sizeof(buf); idx++) {
+ ret = regmap_read(map, hid_buf_addr + offset + idx, &val);
+ if (ret < 0)
+ goto _end_btn_det_;
+ buf[idx] = val & 0xff;
+ }
+ /* Report ID for HID */
+ if (buf[0] == hid_id)
+ btn_type = rt_sdca_btn_type(&buf[1]);
+
+_end_btn_det_:
+ /* Host is owner, so set back to device */
+ if (owner == 0)
+ /* set owner to device */
+ regmap_write(map,
+ SDW_SDCA_CTL(SDCA_NUM_HID, entity_id,
+ RT_SDCA_CTL_HIDTX_CURRENT_OWNER, 0), 0x01);
+
+ return btn_type;
+}
+EXPORT_SYMBOL_GPL(rt_sdca_button_detect);
+
+MODULE_DESCRIPTION("Realtek soundwire common functions");
+MODULE_AUTHOR("jack yu <jack.yu@realtek.com>");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+//
+// rt-sdw-common.h
+//
+// Copyright(c) 2024 Realtek Semiconductor Corp.
+//
+
+/*
+ * This file defines common functions used with Realtek soundwire codecs.
+ */
+
+#ifndef __RT_SDW_COMMON_H__
+#define __RT_SDW_COMMON_H__
+
+#define SDCA_NUM_JACK_CODEC 0x01
+#define SDCA_NUM_MIC_ARRAY 0x02
+#define SDCA_NUM_HID 0x03
+#define SDCA_NUM_AMP 0x04
+#define RT_SDCA_CTL_SELECTED_MODE 0x01
+#define RT_SDCA_CTL_DETECTED_MODE 0x02
+#define RT_SDCA_CTL_HIDTX_CURRENT_OWNER 0x10
+#define RT_SDCA_CTL_HIDTX_MESSAGE_OFFSET 0x12
+
+struct rt_sdca_dmic_kctrl_priv {
+ unsigned int reg_base;
+ unsigned int count;
+ unsigned int max;
+ unsigned int invert;
+};
+
+#define RT_SDCA_PR_VALUE(xreg_base, xcount, xmax, xinvert) \
+ ((unsigned long)&(struct rt_sdca_dmic_kctrl_priv) \
+ {.reg_base = xreg_base, .count = xcount, .max = xmax, \
+ .invert = xinvert})
+
+#define RT_SDCA_FU_CTRL(xname, reg_base, xmax, xinvert, xcount, \
+ xinfo, xget, xput) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+ .info = xinfo, \
+ .get = xget, \
+ .put = xput, \
+ .private_value = RT_SDCA_PR_VALUE(reg_base, xcount, xmax, xinvert)}
+
+#define RT_SDCA_EXT_TLV(xname, reg_base, xhandler_get,\
+ xhandler_put, xcount, xmax, tlv_array, xinfo) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+ SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+ .tlv.p = (tlv_array), \
+ .info = xinfo, \
+ .get = xhandler_get, .put = xhandler_put, \
+ .private_value = RT_SDCA_PR_VALUE(reg_base, xcount, xmax, 0) }
+
+
+int rt_sdca_index_write(struct regmap *map, unsigned int nid,
+ unsigned int reg, unsigned int value);
+int rt_sdca_index_read(struct regmap *map, unsigned int nid,
+ unsigned int reg, unsigned int *value);
+int rt_sdca_index_update_bits(struct regmap *map,
+ unsigned int nid, unsigned int reg, unsigned int mask, unsigned int val);
+int rt_sdca_btn_type(unsigned char *buffer);
+int rt_sdca_headset_detect(struct regmap *map, unsigned int entity_id);
+int rt_sdca_button_detect(struct regmap *map, unsigned int entity_id,
+ unsigned int hid_buf_addr, unsigned int hid_id,
+ unsigned int mask1, unsigned int mask2);
+
+#endif /* __RT_SDW_COMMON_H__ */
This is the first version of common functions for Realtek soundwire codec driver. Signed-off-by: Jack Yu <jack.yu@realtek.com> --- sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt-sdw-common.c | 241 +++++++++++++++++++++++++++++++ sound/soc/codecs/rt-sdw-common.h | 67 +++++++++ 4 files changed, 315 insertions(+) create mode 100644 sound/soc/codecs/rt-sdw-common.c create mode 100644 sound/soc/codecs/rt-sdw-common.h