From patchwork Mon Aug 24 12:03:14 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ricard Wanderlof X-Patchwork-Id: 7063471 Return-Path: X-Original-To: patchwork-alsa-devel@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 2B0D69F358 for ; Mon, 24 Aug 2015 12:03:44 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 0742B205E7 for ; Mon, 24 Aug 2015 12:03:43 +0000 (UTC) Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) by mail.kernel.org (Postfix) with ESMTP id 5B891205F3 for ; Mon, 24 Aug 2015 12:03:41 +0000 (UTC) Received: by alsa0.perex.cz (Postfix, from userid 1000) id 04527260703; Mon, 24 Aug 2015 14:03:40 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Spam-Level: X-Spam-Status: No, score=-2.6 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_LOW, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 Received: from alsa0.perex.cz (localhost [IPv6:::1]) by alsa0.perex.cz (Postfix) with ESMTP id 410072606CF; Mon, 24 Aug 2015 14:03:36 +0200 (CEST) X-Original-To: alsa-devel@alsa-project.org Delivered-To: alsa-devel@alsa-project.org Received: by alsa0.perex.cz (Postfix, from userid 1000) id E24122606DD; Mon, 24 Aug 2015 14:03:34 +0200 (CEST) Received: from bastet.se.axis.com (bastet.se.axis.com [195.60.68.11]) by alsa0.perex.cz (Postfix) with ESMTP id B7E4D2606B7 for ; Mon, 24 Aug 2015 14:03:29 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by bastet.se.axis.com (Postfix) with ESMTP id 7E1BE180FB; Mon, 24 Aug 2015 14:03:23 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at bastet.se.axis.com Received: from bastet.se.axis.com ([IPv6:::ffff:127.0.0.1]) by localhost (bastet.se.axis.com [::ffff:127.0.0.1]) (amavisd-new, port 10024) with LMTP id rIQEH314CBTN; Mon, 24 Aug 2015 14:03:19 +0200 (CEST) Received: from boulder.se.axis.com (boulder.se.axis.com [10.0.2.104]) by bastet.se.axis.com (Postfix) with ESMTP id A0133180E8; Mon, 24 Aug 2015 14:03:14 +0200 (CEST) Received: from boulder.se.axis.com (localhost [127.0.0.1]) by postfix.imss71 (Postfix) with ESMTP id 901DE1362; Mon, 24 Aug 2015 14:03:14 +0200 (CEST) Received: from seth.se.axis.com (seth.se.axis.com [10.0.2.172]) by boulder.se.axis.com (Postfix) with ESMTP id 84443E31; Mon, 24 Aug 2015 14:03:14 +0200 (CEST) Received: from xmail2.se.axis.com (xmail2.se.axis.com [10.0.5.74]) by seth.se.axis.com (Postfix) with ESMTP id 812C13E049; Mon, 24 Aug 2015 14:03:14 +0200 (CEST) Received: from lnxricardw1.se.axis.com (10.88.7.2) by xmail2.se.axis.com (10.0.5.74) with Microsoft SMTP Server (TLS) id 8.3.342.0; Mon, 24 Aug 2015 14:03:14 +0200 Date: Mon, 24 Aug 2015 14:03:14 +0200 From: Ricard Wanderlof X-X-Sender: ricardw@lnxricardw1.se.axis.com To: "alsa-devel@alsa-project.org" , Mark Brown , Liam Girdwood Message-ID: User-Agent: Alpine 2.02 (DEB 1266 2009-07-14) MIME-Version: 1.0 Subject: [alsa-devel] [PATCH v4] ASoC: ics43432: Add codec driver for InvenSense ICS-43432 (fwd) X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org X-Virus-Scanned: ClamAV using ClamSMTP Add support for the InvenSense ICS-43432 I2S MEMS microphone. This is a non-software-configurable MEMS microphone with I2S output. Tested on a setup with a single ICS-43432, although the device itself supports stereo operation using a hardware pin controlling left vs. right channel output. Signed-off-by: Ricard Wanderlof --- V4: Updated commit message that the driver has been tested with real hardware, after off-list comment on V3. V3: Fixed MODULE_LICENSE string. V2: Update after comments from Lars-Peter: set rate to CONTINUOUS and let ALSA figure out the details, also removing hw_params as it is then not needed. I've left the checks in dai_set_fmt, as (IIUC) there currently doesn't seem to be a way for the ALSA framework to handle format constraints using the codec configuration struct. .../devicetree/bindings/sound/ics43432.txt | 17 ++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ics43432.c | 101 ++++++++++++++++++++ 5 files changed, 125 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ics43432.txt create mode 100644 sound/soc/codecs/ics43432.c diff --git a/Documentation/devicetree/bindings/sound/ics43432.txt b/Documentation/devicetree/bindings/sound/ics43432.txt new file mode 100644 index 0000000..b02e3a6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ics43432.txt @@ -0,0 +1,17 @@ +Invensense ICS-43432 MEMS microphone with I2S output. + +There are no software configuration options for this device, indeed, the only +host connection is the I2S interface. Apart from requirements on clock +frequency (460 kHz to 3.379 MHz according to the data sheet) there must be +64 clock cycles in each stereo output frame; 24 of the 32 available bits +contain audio data. A hardware pin determines if the device outputs data +on the left or right channel of the I2S frame. + +Required properties: + - compatible : Must be "invensense,ics43432" + +Example: + + ics43432: ics43432 { + compatible = "invensense,ics43432"; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 8033919..7966637 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -103,6 +103,7 @@ img Imagination Technologies Ltd. innolux Innolux Corporation intel Intel Corporation intercontrol Inter Control Group +invensense InvenSense Inc. isee ISEE 2007 S.L. isil Intersil karo Ka-Ro electronics GmbH diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 061c465..d696c85 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -62,6 +62,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_BT_SCO select SND_SOC_ES8328_SPI if SPI_MASTER select SND_SOC_ES8328_I2C if I2C + select SND_SOC_ICS43432 select SND_SOC_ISABELLE if I2C select SND_SOC_JZ4740_CODEC select SND_SOC_LM4857 if I2C @@ -444,6 +445,9 @@ config SND_SOC_ES8328_SPI tristate select SND_SOC_ES8328 +config SND_SOC_ICS43432 + tristate + config SND_SOC_ISABELLE tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index abe2d7e..23a2caf 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -55,6 +55,7 @@ snd-soc-dmic-objs := dmic.o snd-soc-es8328-objs := es8328.o snd-soc-es8328-i2c-objs := es8328-i2c.o snd-soc-es8328-spi-objs := es8328-spi.o +snd-soc-ics43432-objs := ics43432.o snd-soc-isabelle-objs := isabelle.o snd-soc-jz4740-codec-objs := jz4740.o snd-soc-l3-objs := l3.o @@ -240,6 +241,7 @@ obj-$(CONFIG_SND_SOC_DMIC) += snd-soc-dmic.o obj-$(CONFIG_SND_SOC_ES8328) += snd-soc-es8328.o obj-$(CONFIG_SND_SOC_ES8328_I2C)+= snd-soc-es8328-i2c.o obj-$(CONFIG_SND_SOC_ES8328_SPI)+= snd-soc-es8328-spi.o +obj-$(CONFIG_SND_SOC_ICS43432) += snd-soc-ics43432.o obj-$(CONFIG_SND_SOC_ISABELLE) += snd-soc-isabelle.o obj-$(CONFIG_SND_SOC_JZ4740_CODEC) += snd-soc-jz4740-codec.o obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o diff --git a/sound/soc/codecs/ics43432.c b/sound/soc/codecs/ics43432.c new file mode 100644 index 0000000..fe0af4a --- /dev/null +++ b/sound/soc/codecs/ics43432.c @@ -0,0 +1,101 @@ +/* + * I2S MEMS microphone driver for InvenSense ICS-43432 + * + * - Non configurable. + * - I2S interface, 64 BCLs per frame, 32 bits per channel, 24 bit data + * + * Copyright (c) 2015 Axis Communications AB + * + * Licensed under GPL2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ICS43432_RATE_MIN 7190 /* Hz, from data sheet */ +#define ICS43432_RATE_MAX 52800 /* Hz, from data sheet */ + +static int ics43432_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + break; + default: + return -EINVAL; + } + + return 0; +} + +#define ICS43432_FORMATS (SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32) + +static const struct snd_soc_dai_ops ics43432_dai_ops = { + .set_fmt = ics43432_set_dai_fmt, +}; + +static struct snd_soc_dai_driver ics43432_dai = { + .name = "ics43432-hifi", + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rate_min = ICS43432_RATE_MIN, + .rate_max = ICS43432_RATE_MAX, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .formats = ICS43432_FORMATS, + }, + .ops = &ics43432_dai_ops, +}; + +static struct snd_soc_codec_driver ics43432_codec_driver = { +}; + +static int ics43432_probe(struct platform_device *pdev) +{ + return snd_soc_register_codec(&pdev->dev, &ics43432_codec_driver, + &ics43432_dai, 1); +} + +static int ics43432_remove(struct platform_device *pdev) +{ + snd_soc_unregister_codec(&pdev->dev); + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id ics43432_ids[] = { + { .compatible = "invensense,ics43432", }, + { } +}; +MODULE_DEVICE_TABLE(of, ics43432_dt_ids); +#endif + +static struct platform_driver ics43432_driver = { + .driver = { + .name = "ics43432", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ics43432_ids), + }, + .probe = ics43432_probe, + .remove = ics43432_remove, +}; + +module_platform_driver(ics43432_driver); + +MODULE_DESCRIPTION("ASoC ICS43432 driver"); +MODULE_AUTHOR("Ricard Wanderlof "); +MODULE_LICENSE("GPLv2");