new file mode 100644
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/tas5805m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TAS5805M audio amplifier
+
+maintainers:
+ - Daniel Beer <daniel.beer@igorinstitute.com>
+
+description: |
+ The TAS5805M is a class D audio amplifier with a built-in DSP.
+
+properties:
+ compatible:
+ enum:
+ - ti,tas5805m
+
+ reg:
+ maxItems: 1
+ description: |
+ I2C address of the amplifier. See the datasheet for possible values.
+
+ pvdd-supply:
+ description: |
+ Regulator for audio power supply (PVDD in the datasheet).
+
+ pdn-gpios:
+ description: |
+ Power-down control GPIO (PDN pin in the datasheet).
+
+ ti,dsp-config-name:
+ description: |
+ The name of the DSP configuration that should be loaded for this
+ instance. Configuration blobs are sequences of register writes
+ generated from TI's PPC3 tool.
+ $ref: /schemas/types.yaml#/definitions/string
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ tas5805m: tas5805m@2c {
+ reg = <0x2c>;
+ compatible = "ti,tas5805m";
+
+ pvdd-supply = <&audiopwr>;
+ pdn-gpios = <&tlmm 160 0>;
+
+ ti,dsp-config-name = "mono_pbtl_48khz";
+ };
+ };
+
+additionalProperties: true
The TAS5805M is a class D speaker amplifier with integrated DSP. Configuration must be generated by TI's PPC3 tool and supplied as a firmware image. Signed-off-by: Daniel Beer <daniel.beer@igorinstitute.com> --- .../devicetree/bindings/sound/tas5805m.yaml | 56 +++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tas5805m.yaml