@@ -103,6 +103,18 @@ u8 ath10k_mac_hw_rate_to_idx(const struct ieee80211_supported_band *sband,
return 0;
}
+u8 ath10k_mac_bitrate_to_idx(const struct ieee80211_supported_band *sband,
+ u32 bitrate)
+{
+ int i;
+
+ for (i = 0; i < sband->n_bitrates; i++)
+ if (sband->bitrates[i].bitrate == bitrate)
+ return i;
+
+ return 0;
+}
+
/**********/
/* Crypto */
/**********/
@@ -47,8 +47,11 @@ bool ath10k_mac_is_peer_wep_key_set(struct ath10k *ar, const u8 *addr,
u8 keyidx);
void ath10k_mac_handle_beacon(struct ath10k *ar, struct sk_buff *skb);
void ath10k_mac_handle_beacon_miss(struct ath10k *ar, u32 vdev_id);
+
u8 ath10k_mac_hw_rate_to_idx(const struct ieee80211_supported_band *sband,
u8 hw_rate);
+u8 ath10k_mac_bitrate_to_idx(const struct ieee80211_supported_band *sband,
+ u32 bitrate);
static inline struct ath10k_vif *ath10k_vif_to_arvif(struct ieee80211_vif *vif)
{
@@ -1352,63 +1352,6 @@ static inline enum ieee80211_band phy_mode_to_band(u32 phy_mode)
return band;
}
-static inline u8 get_rate_idx(u32 rate, enum ieee80211_band band)
-{
- u8 rate_idx = 0;
-
- /* rate in Kbps */
- switch (rate) {
- case 1000:
- rate_idx = 0;
- break;
- case 2000:
- rate_idx = 1;
- break;
- case 5500:
- rate_idx = 2;
- break;
- case 11000:
- rate_idx = 3;
- break;
- case 6000:
- rate_idx = 4;
- break;
- case 9000:
- rate_idx = 5;
- break;
- case 12000:
- rate_idx = 6;
- break;
- case 18000:
- rate_idx = 7;
- break;
- case 24000:
- rate_idx = 8;
- break;
- case 36000:
- rate_idx = 9;
- break;
- case 48000:
- rate_idx = 10;
- break;
- case 54000:
- rate_idx = 11;
- break;
- default:
- break;
- }
-
- if (band == IEEE80211_BAND_5GHZ) {
- if (rate_idx > 3)
- /* Omit CCK rates */
- rate_idx -= 4;
- else
- rate_idx = 0;
- }
-
- return rate_idx;
-}
-
/* If keys are configured, HW decrypts all frames
* with protected bit set. Mark such frames as decrypted.
*/
@@ -1490,6 +1433,7 @@ int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
struct wmi_mgmt_rx_ev_arg arg = {};
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
struct ieee80211_hdr *hdr;
+ struct ieee80211_supported_band *sband;
u32 rx_status;
u32 channel;
u32 phy_mode;
@@ -1560,9 +1504,11 @@ int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
if (phy_mode == MODE_11B && status->band == IEEE80211_BAND_5GHZ)
ath10k_dbg(ar, ATH10K_DBG_MGMT, "wmi mgmt rx 11b (CCK) on 5GHz\n");
+ sband = &ar->mac.sbands[status->band];
+
status->freq = ieee80211_channel_to_frequency(channel, status->band);
status->signal = snr + ATH10K_DEFAULT_NOISE_FLOOR;
- status->rate_idx = get_rate_idx(rate, status->band);
+ status->rate_idx = ath10k_mac_bitrate_to_idx(sband, rate / 100);
hdr = (struct ieee80211_hdr *)skb->data;
fc = le16_to_cpu(hdr->frame_control);
It's possible to derive rate index from bitrate without any additional mapping structures/logic. This should have little to none impact on performance since this is only done for management frames and the previous approach wasn't particularly optimized. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> --- drivers/net/wireless/ath/ath10k/mac.c | 12 +++++++ drivers/net/wireless/ath/ath10k/mac.h | 3 ++ drivers/net/wireless/ath/ath10k/wmi.c | 62 +++-------------------------------- 3 files changed, 19 insertions(+), 58 deletions(-)