diff mbox

[4/4] ath10k: enable ibss-rsn

Message ID 1428672203-8604-5-git-send-email-michal.kazior@tieto.com (mailing list archive)
State Accepted
Headers show

Commit Message

Michal Kazior April 10, 2015, 1:23 p.m. UTC 
From: Janusz Dziedzic <janusz.dziedzic@tieto.com>

With latest additions to the driver it seems
viable to enable support for IBSS-RSN.

It seems to work on QCA988X and 999.999.0.636 but
is a bit slow to exchange RSN keys for some
reason. This may be a firmware quirk or ath10k is
missing something. Nevertheless it makes sense to
finally enable IBSS-RSN in ath10k even if somewhat
handicapped.

QCA6174 firmware doesn't seem to be able to Tx
EAPOL frames at all now (they get stuck in hw
queues for some reason) so it never gets to set
the keys in driver. It's fairly safe to assume that
once this is fixed IBSS-RSN will work with QCA6174
firmware without any additional changes. Hence no
special handling for advertising
IEEE80211_HW_SUPPORTS_PER_STA_GTK and
WIPHY_FLAG_IBSS_RSN is done now.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Michal Kazior April 13, 2015, 8:41 a.m. UTC | #1 
On 10 April 2015 at 15:23, Michal Kazior <michal.kazior@tieto.com> wrote:
> From: Janusz Dziedzic <janusz.dziedzic@tieto.com>
>
> With latest additions to the driver it seems
> viable to enable support for IBSS-RSN.
>
> It seems to work on QCA988X and 999.999.0.636 but
> is a bit slow to exchange RSN keys for some
> reason. This may be a firmware quirk or ath10k is
> missing something. Nevertheless it makes sense to
> finally enable IBSS-RSN in ath10k even if somewhat
> handicapped.
>
> QCA6174 firmware doesn't seem to be able to Tx
> EAPOL frames at all now (they get stuck in hw
> queues for some reason) so it never gets to set
> the keys in driver. It's fairly safe to assume that
> once this is fixed IBSS-RSN will work with QCA6174
> firmware without any additional changes. Hence no
> special handling for advertising
> IEEE80211_HW_SUPPORTS_PER_STA_GTK and
> WIPHY_FLAG_IBSS_RSN is done now.

As a matter of fact QCA6174 firmware does seem to work with IBSS as
well. I just found out (by accident, after leaving a failed test setup
for a while) that after approx. 300 seconds firmware discards all
stuck EAPOL frames and starts sending subsequent ones properly. Keys
gets exchanged, installed and traffic seems to work fine with this
patchset. I suppose this warrants an updated commit log.


Micha?
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 9428d75d0d76..7485d5ccee3d 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -6720,11 +6720,13 @@  int ath10k_mac_register(struct ath10k *ar)
 			IEEE80211_HW_SPECTRUM_MGMT |
 			IEEE80211_HW_SW_CRYPTO_CONTROL |
 			IEEE80211_HW_CONNECTION_MONITOR |
+			IEEE80211_HW_SUPPORTS_PER_STA_GTK |
 			IEEE80211_HW_WANT_MONITOR_VIF |
 			IEEE80211_HW_CHANCTX_STA_CSA |
 			IEEE80211_HW_QUEUE_CONTROL;
 
 	ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS;
+	ar->hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
 
 	if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS)
 		ar->hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS;