@@ -48,6 +48,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.name = "qca988x hw2.0",
.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
+ .has_shifted_cc_wraparound = true,
.fw = {
.dir = QCA988X_HW_2_0_FW_DIR,
.fw = QCA988X_HW_2_0_FW_FILE,
@@ -572,6 +572,13 @@ struct ath10k {
u32 patch_load_addr;
int uart_pin;
+ /* This is true if given HW chip has a quirky Cycle Counter
+ * wraparound which resets to 0x7fffffff instead of 0. All
+ * other CC related counters (e.g. Rx Clear Count) are divided
+ * by 2 so they never wraparound themselves.
+ */
+ bool has_shifted_cc_wraparound;
+
struct ath10k_hw_params_fw {
const char *dir;
const char *fw;
@@ -15,6 +15,7 @@
*/
#include <linux/types.h>
+#include "core.h"
#include "hw.h"
const struct ath10k_hw_regs qca988x_regs = {
@@ -56,3 +57,23 @@ const struct ath10k_hw_regs qca6174_regs = {
.soc_chip_id_address = 0x000f0,
.scratch_3_address = 0x0028,
};
+
+void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
+ u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev)
+{
+ u32 cc_fix = 0;
+
+ survey->filled |= SURVEY_INFO_TIME |
+ SURVEY_INFO_TIME_BUSY;
+
+ if (ar->hw_params.has_shifted_cc_wraparound && cc < cc_prev) {
+ cc_fix = 0x7fffffff;
+ survey->filled &= ~SURVEY_INFO_TIME_BUSY;
+ }
+
+ cc -= cc_prev - cc_fix;
+ rcc -= rcc_prev;
+
+ survey->time = CCNT_TO_MSEC(cc);
+ survey->time_busy = CCNT_TO_MSEC(rcc);
+}
@@ -169,6 +169,9 @@ struct ath10k_hw_regs {
extern const struct ath10k_hw_regs qca988x_regs;
extern const struct ath10k_hw_regs qca6174_regs;
+void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
+ u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev);
+
#define QCA_REV_988X(ar) ((ar)->hw_rev == ATH10K_HW_QCA988X)
#define QCA_REV_6174(ar) ((ar)->hw_rev == ATH10K_HW_QCA6174)
@@ -27,6 +27,7 @@
#include "testmode.h"
#include "wmi-ops.h"
#include "p2p.h"
+#include "hw.h"
/* MAIN WMI cmd track */
static struct wmi_cmd_map wmi_cmd_map = {
@@ -1640,16 +1641,16 @@ void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb)
* visited channel. The reported cycle count is global
* and per-channel cycle count must be calculated */
- cycle_count -= ar->survey_last_cycle_count;
- rx_clear_count -= ar->survey_last_rx_clear_count;
-
survey = &ar->survey[idx];
- survey->time = CCNT_TO_MSEC(cycle_count);
- survey->time_busy = CCNT_TO_MSEC(rx_clear_count);
survey->noise = noise_floor;
- survey->filled = SURVEY_INFO_TIME |
- SURVEY_INFO_TIME_BUSY |
- SURVEY_INFO_NOISE_DBM;
+ survey->filled = SURVEY_INFO_NOISE_DBM;
+
+ ath10k_hw_fill_survey_time(ar,
+ survey,
+ cycle_count,
+ rx_clear_count,
+ ar->survey_last_cycle_count,
+ ar->survey_last_rx_clear_count);
}
ar->survey_last_rx_clear_count = rx_clear_count;
When QCA988X cycle counter HW register wraps around it resets to 0x7fffffff instead of 0. All other cycle counter related registers are divided by 2 so they never wraparound themselves. QCA61X4 has a uniform CC and it wraparounds in a regular fashion though. Worst case wraparound time is approx 24 seconds (2**31 / 88MHz). Since scan channel visit times are max 5 seconds (offchannel case) it is guaranteed there's been at most 1 wraparound and it is possible to compute survey active time value. It is, however, impossible to determine the point at which Rx Clear Count has been divided by two so it is not reported upon wraparound. This fixes some occasional incorrect survey data on QCA988X as some channels (depending on how/when scan/offchannel requests were requested) would have approx 24 sec active time which wasn't actually the case. This should improve hostapd ACS a little bit. Reported-by: Srinivasa Duvvuri <sduvvuri@chromium.org> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> --- Notes: v4: * use hw.c for cc computation logic [Kalle] * drop rx_clear_count upon wraparound [Srinivasa] v3: * split into 2 separate patches * don't ignore all wraparound data: scans can be computed * apply the shifted wraparound fix only for QCA988X * improve commit log drivers/net/wireless/ath/ath10k/core.c | 1 + drivers/net/wireless/ath/ath10k/core.h | 7 +++++++ drivers/net/wireless/ath/ath10k/hw.c | 21 +++++++++++++++++++++ drivers/net/wireless/ath/ath10k/hw.h | 3 +++ drivers/net/wireless/ath/ath10k/wmi.c | 17 +++++++++-------- 5 files changed, 41 insertions(+), 8 deletions(-)