@@ -284,15 +284,6 @@ struct ath10k_sta {
#endif
};
-struct ath10k_chanctx {
- /* Used to story copy of chanctx_conf to avoid inconsistencies. Ideally
- * mac80211 should allow some sort of explicit locking to guarantee
- * that the publicly available chanctx_conf can be accessed safely at
- * all times.
- */
- struct ieee80211_chanctx_conf conf;
-};
-
#define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5*HZ)
enum ath10k_beacon_state {
@@ -6188,25 +6188,11 @@ ath10k_mac_update_rx_channel(struct ath10k *ar,
rcu_read_unlock();
}
-static void
-ath10k_mac_chan_ctx_init(struct ath10k *ar,
- struct ath10k_chanctx *arctx,
- struct ieee80211_chanctx_conf *conf)
-{
- lockdep_assert_held(&ar->conf_mutex);
- lockdep_assert_held(&ar->data_lock);
-
- memset(arctx, 0, sizeof(*arctx));
-
- arctx->conf = *conf;
-}
-
static int
ath10k_mac_op_add_chanctx(struct ieee80211_hw *hw,
struct ieee80211_chanctx_conf *ctx)
{
struct ath10k *ar = hw->priv;
- struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
ath10k_dbg(ar, ATH10K_DBG_MAC,
"mac chanctx add freq %hu width %d ptr %p\n",
@@ -6215,7 +6201,6 @@ ath10k_mac_op_add_chanctx(struct ieee80211_hw *hw,
mutex_lock(&ar->conf_mutex);
spin_lock_bh(&ar->data_lock);
- ath10k_mac_chan_ctx_init(ar, arctx, ctx);
ath10k_mac_update_rx_channel(ar, ctx, NULL, 0);
spin_unlock_bh(&ar->data_lock);
@@ -6255,16 +6240,12 @@ ath10k_mac_op_change_chanctx(struct ieee80211_hw *hw,
u32 changed)
{
struct ath10k *ar = hw->priv;
- struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
mutex_lock(&ar->conf_mutex);
ath10k_dbg(ar, ATH10K_DBG_MAC,
- "mac chanctx change freq %hu->%hu width %d->%d ptr %p changed %x\n",
- arctx->conf.def.chan->center_freq,
- ctx->def.chan->center_freq,
- arctx->conf.def.width, ctx->def.width,
- ctx, changed);
+ "mac chanctx change freq %hu width %d ptr %p changed %x\n",
+ ctx->def.chan->center_freq, ctx->def.width, ctx, changed);
/* This shouldn't really happen because channel switching should use
* switch_vif_chanctx().
@@ -6272,10 +6253,6 @@ ath10k_mac_op_change_chanctx(struct ieee80211_hw *hw,
if (WARN_ON(changed & IEEE80211_CHANCTX_CHANGE_CHANNEL))
goto unlock;
- spin_lock_bh(&ar->data_lock);
- arctx->conf = *ctx;
- spin_unlock_bh(&ar->data_lock);
-
ath10k_recalc_radar_detection(ar);
/* FIXME: How to configure Rx chains properly? */
@@ -6295,7 +6272,6 @@ ath10k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
struct ieee80211_chanctx_conf *ctx)
{
struct ath10k *ar = hw->priv;
- struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
struct ath10k_vif *arvif = (void *)vif->drv_priv;
int ret;
@@ -6310,11 +6286,11 @@ ath10k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
return -EBUSY;
}
- ret = ath10k_vdev_start(arvif, &arctx->conf.def);
+ ret = ath10k_vdev_start(arvif, &ctx->def);
if (ret) {
ath10k_warn(ar, "failed to start vdev %i addr %pM on freq %d: %d\n",
arvif->vdev_id, vif->addr,
- arctx->conf.def.chan->center_freq, ret);
+ ctx->def.chan->center_freq, ret);
goto err;
}
@@ -6389,7 +6365,6 @@ ath10k_mac_op_switch_vif_chanctx(struct ieee80211_hw *hw,
{
struct ath10k *ar = hw->priv;
struct ath10k_vif *arvif;
- struct ath10k_chanctx *arctx_new, *arctx_old;
int i;
mutex_lock(&ar->conf_mutex);
@@ -6401,29 +6376,14 @@ ath10k_mac_op_switch_vif_chanctx(struct ieee80211_hw *hw,
spin_lock_bh(&ar->data_lock);
for (i = 0; i < n_vifs; i++) {
arvif = ath10k_vif_to_arvif(vifs[i].vif);
- arctx_new = (void *)vifs[i].new_ctx->drv_priv;
- arctx_old = (void *)vifs[i].old_ctx->drv_priv;
ath10k_dbg(ar, ATH10K_DBG_MAC,
- "mac chanctx switch vdev_id %i freq %hu->%hu width %d->%d ptr %p->%p\n",
+ "mac chanctx switch vdev_id %i freq %hu->%hu width %d->%d\n",
arvif->vdev_id,
vifs[i].old_ctx->def.chan->center_freq,
vifs[i].new_ctx->def.chan->center_freq,
vifs[i].old_ctx->def.width,
- vifs[i].new_ctx->def.width,
- arctx_old, arctx_new);
-
- if (mode == CHANCTX_SWMODE_SWAP_CONTEXTS) {
- ath10k_mac_chan_ctx_init(ar, arctx_new,
- vifs[i].new_ctx);
- }
-
- arctx_new->conf = *vifs[i].new_ctx;
-
- /* FIXME: ath10k_mac_chan_reconfigure() uses current, i.e. not
- * yet updated chanctx_conf pointer.
- */
- arctx_old->conf = *vifs[i].new_ctx;
+ vifs[i].new_ctx->def.width);
}
ath10k_mac_update_rx_channel(ar, NULL, vifs, n_vifs);
spin_unlock_bh(&ar->data_lock);
@@ -6926,7 +6886,6 @@ int ath10k_mac_register(struct ath10k *ar)
ar->hw->vif_data_size = sizeof(struct ath10k_vif);
ar->hw->sta_data_size = sizeof(struct ath10k_sta);
- ar->hw->chanctx_data_size = sizeof(struct ath10k_chanctx);
ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL;
In practice there's no point in having a copy of chanctx_conf. Most of the time the channel pointer (and band along with it) is accessed and this can't change after a chanctx is created because switching is done using explicit chanctx swapping via switch_vif_chanctx(). The only thing that can change within a chanctx_conf and is used by the driver is radar_enabled and channel width. These are however always accessed in adequate mac80211 callback context which guarantees safe access to the chanctx data. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> --- drivers/net/wireless/ath/ath10k/core.h | 9 ------ drivers/net/wireless/ath/ath10k/mac.c | 53 ++++------------------------------ 2 files changed, 6 insertions(+), 56 deletions(-)