@@ -49,6 +49,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.has_shifted_cc_wraparound = true,
+ .otp_exe_param = 0,
.fw = {
.dir = QCA988X_HW_2_0_FW_DIR,
.fw = QCA988X_HW_2_0_FW_FILE,
@@ -63,6 +64,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.name = "qca6174 hw2.1",
.patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
.uart_pin = 6,
+ .otp_exe_param = 0,
.fw = {
.dir = QCA6174_HW_2_1_FW_DIR,
.fw = QCA6174_HW_2_1_FW_FILE,
@@ -77,6 +79,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.name = "qca6174 hw3.0",
.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
+ .otp_exe_param = 0,
.fw = {
.dir = QCA6174_HW_3_0_FW_DIR,
.fw = QCA6174_HW_3_0_FW_FILE,
@@ -91,6 +94,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.name = "qca6174 hw3.2",
.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
+ .otp_exe_param = 0,
.fw = {
/* uses same binaries as hw3.0 */
.dir = QCA6174_HW_3_0_FW_DIR,
@@ -106,6 +110,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.name = "qca99x0 hw2.0",
.patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
+ .otp_exe_param = 0x00000700,
.fw = {
.dir = QCA99X0_HW_2_0_FW_DIR,
.fw = QCA99X0_HW_2_0_FW_FILE,
@@ -369,6 +374,7 @@ out:
static int ath10k_download_and_run_otp(struct ath10k *ar)
{
u32 result, address = ar->hw_params.patch_load_addr;
+ u32 bmi_otp_exe_param = ar->hw_params.otp_exe_param;
int ret;
ret = ath10k_download_board_data(ar, ar->board_data, ar->board_len);
@@ -394,7 +400,7 @@ static int ath10k_download_and_run_otp(struct ath10k *ar)
return ret;
}
- ret = ath10k_bmi_execute(ar, address, 0, &result);
+ ret = ath10k_bmi_execute(ar, address, bmi_otp_exe_param, &result);
if (ret) {
ath10k_err(ar, "could not execute otp (%d)\n", ret);
return ret;
@@ -572,6 +572,7 @@ struct ath10k {
const char *name;
u32 patch_load_addr;
int uart_pin;
+ u32 otp_exe_param;
/* This is true if given HW chip has a quirky Cycle Counter
* wraparound which resets to 0x7fffffff instead of 0. All
BMI parameter value to execute downloaded otp binary is different for QCA99X0. Have a member in hw_params to hold hw specific BMI param. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/core.c | 8 +++++++- drivers/net/wireless/ath/ath10k/core.h | 1 + 2 files changed, 8 insertions(+), 1 deletion(-)