@@ -21,7 +21,7 @@
#include "hif.h"
/* Maximum number of Copy Engine's supported */
-#define CE_COUNT_MAX 8
+#define CE_COUNT_MAX 12
#define CE_HTT_H2T_MSG_SRC_NENTRIES 4096
/* Descriptor rings must be aligned to this boundary */
@@ -343,6 +343,9 @@ enum ath10k_hw_rate_cck {
#define TARGET_TLV_NUM_MSDU_DESC (1024 + 32)
#define TARGET_TLV_NUM_WOW_PATTERNS 22
+/* Diagnostic Window */
+#define CE_DIAG_PIPE 7
+
#define NUM_TARGET_CE_CONFIG_WLAN ar->hw_values->num_target_ce_config_wlan
/* Number of Copy Engines supported */
@@ -156,6 +156,38 @@ static const struct ce_attr host_ce_config_wlan[] = {
.src_sz_max = DIAG_TRANSFER_LIMIT,
.dest_nentries = 2,
},
+
+ /* CE8: target->host pktlog */
+ {
+ .flags = CE_ATTR_FLAGS,
+ .src_nentries = 0,
+ .src_sz_max = 2048,
+ .dest_nentries = 128,
+ },
+
+ /* CE9 target autonomous qcache memcpy */
+ {
+ .flags = CE_ATTR_FLAGS,
+ .src_nentries = 0,
+ .src_sz_max = 0,
+ .dest_nentries = 0,
+ },
+
+ /* CE10: target autonomous hif memcpy */
+ {
+ .flags = CE_ATTR_FLAGS,
+ .src_nentries = 0,
+ .src_sz_max = 0,
+ .dest_nentries = 0,
+ },
+
+ /* CE11: target autonomous hif memcpy */
+ {
+ .flags = CE_ATTR_FLAGS,
+ .src_nentries = 0,
+ .src_sz_max = 0,
+ .dest_nentries = 0,
+ },
};
/* Target firmware's Copy Engine configuration. */
@@ -233,6 +265,38 @@ static const struct ce_pipe_config target_ce_config_wlan[] = {
},
/* CE7 used only by Host */
+ {
+ .pipenum = __cpu_to_le32(7),
+ .pipedir = __cpu_to_le32(PIPEDIR_INOUT),
+ .nentries = __cpu_to_le32(0),
+ .nbytes_max = __cpu_to_le32(0),
+ .flags = __cpu_to_le32(0),
+ .reserved = __cpu_to_le32(0),
+ },
+
+ /* CE8 target->host packtlog */
+ {
+ .pipenum = __cpu_to_le32(8),
+ .pipedir = __cpu_to_le32(PIPEDIR_IN),
+ .nentries = __cpu_to_le32(64),
+ .nbytes_max = __cpu_to_le32(2048),
+ .flags = __cpu_to_le32(CE_ATTR_FLAGS | CE_ATTR_DIS_INTR),
+ .reserved = __cpu_to_le32(0),
+ },
+
+ /* CE9 target autonomous qcache memcpy */
+ {
+ .pipenum = __cpu_to_le32(9),
+ .pipedir = __cpu_to_le32(PIPEDIR_INOUT),
+ .nentries = __cpu_to_le32(32),
+ .nbytes_max = __cpu_to_le32(2048),
+ .flags = __cpu_to_le32(CE_ATTR_FLAGS | CE_ATTR_DIS_INTR),
+ .reserved = __cpu_to_le32(0),
+ },
+
+ /* It not necessary to send target wlan configuration for CE10 & CE11
+ * as these CEs are not actively used in target.
+ */
};
/*
@@ -1771,7 +1835,8 @@ static int ath10k_pci_init_config(struct ath10k *ar)
ret = ath10k_pci_diag_write_mem(ar, pipe_cfg_targ_addr,
target_ce_config_wlan,
- sizeof(target_ce_config_wlan));
+ sizeof(struct ce_pipe_config) *
+ NUM_TARGET_CE_CONFIG_WLAN);
if (ret != 0) {
ath10k_err(ar, "Failed to write pipe cfg: %d\n", ret);
@@ -1885,7 +1950,7 @@ static int ath10k_pci_alloc_pipes(struct ath10k *ar)
}
/* Last CE is Diagnostic Window */
- if (i == CE_COUNT - 1) {
+ if (i == CE_DIAG_PIPE) {
ar_pci->ce_diag = pipe->ce_hdl;
continue;
}
QCA99X0 supports upto 12 Copy engines. Host and target CE configuration table is updated to support new copy engine pipes. This also fixes the assumption of diagnostic CE by making CE_7 as the one instead of CE_COUNT - 1. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/ce.h | 2 +- drivers/net/wireless/ath/ath10k/hw.h | 3 ++ drivers/net/wireless/ath/ath10k/pci.c | 69 ++++++++++++++++++++++++++++++++++- 3 files changed, 71 insertions(+), 3 deletions(-)