@@ -755,6 +755,26 @@ static void ath10k_pci_rx_replenish_retry(unsigned long ptr)
ath10k_pci_rx_post(ar);
}
+static u32 ath10k_pci_targ_cpu_to_ce_addr(struct ath10k *ar, u32 addr)
+{
+ u32 val = 0;
+
+ switch (ar->hw_rev) {
+ case ATH10K_HW_QCA988X:
+ case ATH10K_HW_QCA6174:
+ val = (ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
+ CORE_CTRL_ADDRESS) &
+ 0x7fff) << 21;
+ break;
+ case ATH10K_HW_QCA99X0:
+ val = ath10k_pci_read32(ar, PCIE_BAR_REG_ADDRESS);
+ break;
+ }
+
+ val |= 0x100000 | (addr & 0xfffff);
+ return val;
+}
+
/*
* Diagnostic read/write access is provided for startup/config/debug usage.
* Caller must guarantee proper alignment, when applicable, and single user
@@ -817,8 +837,7 @@ static int ath10k_pci_diag_read_mem(struct ath10k *ar, u32 address, void *data,
* convert it from Target CPU virtual address space
* to CE address space
*/
- address = TARG_CPU_SPACE_TO_CE_SPACE(ar, ar_pci->mem,
- address);
+ address = ath10k_pci_targ_cpu_to_ce_addr(ar, address);
ret = ath10k_ce_send_nolock(ce_diag, NULL, (u32)address, nbytes, 0,
0);
@@ -976,7 +995,7 @@ static int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
* to
* CE address space
*/
- address = TARG_CPU_SPACE_TO_CE_SPACE(ar, ar_pci->mem, address);
+ address = ath10k_pci_targ_cpu_to_ce_addr(ar, address);
remaining_bytes = orig_nbytes;
ce_data = ce_data_base;
@@ -237,18 +237,6 @@ static inline struct ath10k_pci *ath10k_pci_priv(struct ath10k *ar)
#define CDC_WAR_MAGIC_STR 0xceef0000
#define CDC_WAR_DATA_CE 4
-/*
- * TODO: Should be a function call specific to each Target-type.
- * This convoluted macro converts from Target CPU Virtual Address Space to CE
- * Address Space. As part of this process, we conservatively fetch the current
- * PCIE_BAR. MOST of the time, this should match the upper bits of PCI space
- * for this device; but that's not guaranteed.
- */
-#define TARG_CPU_SPACE_TO_CE_SPACE(ar, pci_addr, addr) \
- (((ath10k_pci_read32(ar, (SOC_CORE_BASE_ADDRESS | \
- CORE_CTRL_ADDRESS)) & 0x7ff) << 21) | \
- 0x100000 | ((addr) & 0xfffff))
-
/* Wait up to this many Ms for a Diagnostic Access CE operation to complete */
#define DIAG_ACCESS_CE_TIMEOUT_MS 10
Make the helper converting target virtual address space to CE address space a target type specific to support QCA99X0. Also make this as function instead of macro. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/pci.c | 25 ++++++++++++++++++++++--- drivers/net/wireless/ath/ath10k/pci.h | 12 ------------ 2 files changed, 22 insertions(+), 15 deletions(-)