@@ -452,6 +452,7 @@ int ath10k_ce_completed_recv_next_nolock(struct ath10k_ce_pipe *ce_state,
{
struct ath10k_ce_ring *dest_ring = ce_state->dest_ring;
unsigned int nentries_mask = dest_ring->nentries_mask;
+ struct ath10k *ar = ce_state->ar;
unsigned int sw_index = dest_ring->sw_index;
struct ce_desc *base = dest_ring->base_addr_owner_space;
@@ -38,8 +38,13 @@ struct ath10k_ce_pipe;
#define CE_DESC_FLAGS_GATHER (1 << 0)
#define CE_DESC_FLAGS_BYTE_SWAP (1 << 1)
-#define CE_DESC_FLAGS_META_DATA_MASK 0xFFFC
-#define CE_DESC_FLAGS_META_DATA_LSB 2
+
+/* Following desc flags are used in QCA99X0 */
+#define CE_DESC_FLAGS_HOST_INT_DIS (1 << 2)
+#define CE_DESC_FLAGS_TGT_INT_DIS (1 << 3)
+
+#define CE_DESC_FLAGS_META_DATA_MASK ar->hw_values->ce_desc_meta_data_mask
+#define CE_DESC_FLAGS_META_DATA_LSB ar->hw_values->ce_desc_meta_data_lsb
struct ce_desc {
__le32 addr;
@@ -114,6 +114,8 @@ const struct ath10k_hw_values qca988x_values = {
.ce_count = 8,
.msi_assign_ce_max = 7,
.num_target_ce_config_wlan = 7,
+ .ce_desc_meta_data_mask = 0xFFFC,
+ .ce_desc_meta_data_lsb = 2,
};
const struct ath10k_hw_values qca6174_values = {
@@ -121,6 +123,8 @@ const struct ath10k_hw_values qca6174_values = {
.ce_count = 8,
.msi_assign_ce_max = 7,
.num_target_ce_config_wlan = 7,
+ .ce_desc_meta_data_mask = 0xFFFC,
+ .ce_desc_meta_data_lsb = 2,
};
const struct ath10k_hw_values qca99x0_values = {
@@ -128,6 +132,8 @@ const struct ath10k_hw_values qca99x0_values = {
.ce_count = 12,
.msi_assign_ce_max = 12,
.num_target_ce_config_wlan = 10,
+ .ce_desc_meta_data_mask = 0xFFF0,
+ .ce_desc_meta_data_lsb = 4,
};
void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
@@ -195,6 +195,8 @@ struct ath10k_hw_values {
u8 ce_count;
u8 msi_assign_ce_max;
u8 num_target_ce_config_wlan;
+ u16 ce_desc_meta_data_mask;
+ u8 ce_desc_meta_data_lsb;
};
extern const struct ath10k_hw_values qca988x_values;
QCA99X0 uses two new copy engine src desc flags for interrupt indication. Bit_2 is to mark if host interrupt is disabled after processing the current desc and bit_3 is to mark if target interrupt is diabled after the processing of current descriptor. CE_DESC_FLAGS_META_DATA_MASK and CE_DESC_FLAGS_META_DATA_LSB are based on the target type. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/ce.c | 1 + drivers/net/wireless/ath/ath10k/ce.h | 9 +++++++-- drivers/net/wireless/ath/ath10k/hw.c | 6 ++++++ drivers/net/wireless/ath/ath10k/hw.h | 2 ++ 4 files changed, 16 insertions(+), 2 deletions(-)