@@ -29,6 +29,13 @@ config ATH10K_SDIO
This module adds experimental support for SDIO/MMC bus. Currently
work in progress and will not fully work.
+config ATH10K_USB
+ tristate "Atheros ath10k USB support (EXPERIMENTAL)"
+ depends on ATH10K && USB
+ ---help---
+ This module adds experimental support for USB bus. Currently
+ work in progress and will not fully work.
+
config ATH10K_DEBUG
bool "Atheros ath10k debugging"
depends on ATH10K
@@ -30,5 +30,8 @@ ath10k_pci-$(CONFIG_ATH10K_AHB) += ahb.o
obj-$(CONFIG_ATH10K_SDIO) += ath10k_sdio.o
ath10k_sdio-y += sdio.o
+obj-$(CONFIG_ATH10K_USB) += ath10k_usb.o
+ath10k_usb-y += usb.o
+
# for tracing framework to find trace.h
CFLAGS_trace.o := -I$(src)
new file mode 100644
@@ -0,0 +1,1128 @@
+/*
+ * Copyright (c) 2007-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2012,2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2016-2017 Erik Stromdahl <erik.stromdahl@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "debug.h"
+#include "core.h"
+#include "bmi.h"
+#include "hif.h"
+#include "htc.h"
+#include "usb.h"
+
+static void ath10k_usb_post_recv_transfers(struct ath10k *ar,
+ struct ath10k_usb_pipe *recv_pipe);
+
+/* inlined helper functions */
+
+static inline enum ath10k_htc_ep_id
+eid_from_htc_hdr(struct ath10k_htc_hdr *htc_hdr)
+{
+ return (enum ath10k_htc_ep_id)htc_hdr->eid;
+}
+
+static inline bool is_trailer_only_msg(struct ath10k_htc_hdr *htc_hdr)
+{
+ bool trailer_only = false;
+ u16 len = __le16_to_cpu(htc_hdr->len);
+
+ if (len == htc_hdr->trailer_len)
+ trailer_only = true;
+
+ return trailer_only;
+}
+
+/* pipe/urb operations */
+static struct ath10k_urb_context *
+ath10k_usb_alloc_urb_from_pipe(struct ath10k_usb_pipe *pipe)
+{
+ struct ath10k_urb_context *urb_context = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pipe->ar_usb->cs_lock, flags);
+ if (!list_empty(&pipe->urb_list_head)) {
+ urb_context =
+ list_first_entry(&pipe->urb_list_head,
+ struct ath10k_urb_context, link);
+ list_del(&urb_context->link);
+ pipe->urb_cnt--;
+ }
+ spin_unlock_irqrestore(&pipe->ar_usb->cs_lock, flags);
+
+ return urb_context;
+}
+
+static void ath10k_usb_free_urb_to_pipe(struct ath10k_usb_pipe *pipe,
+ struct ath10k_urb_context *urb_context)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pipe->ar_usb->cs_lock, flags);
+ pipe->urb_cnt++;
+
+ list_add(&urb_context->link, &pipe->urb_list_head);
+ spin_unlock_irqrestore(&pipe->ar_usb->cs_lock, flags);
+}
+
+static void ath10k_usb_cleanup_recv_urb(struct ath10k_urb_context *urb_context)
+{
+ dev_kfree_skb(urb_context->skb);
+ urb_context->skb = NULL;
+
+ ath10k_usb_free_urb_to_pipe(urb_context->pipe, urb_context);
+}
+
+static void ath10k_usb_free_pipe_resources(struct ath10k *ar,
+ struct ath10k_usb_pipe *pipe)
+{
+ if (!pipe->ar_usb) {
+ /* nothing allocated for this pipe */
+ return;
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_USB,
+ "free resources lpipe:%d hpipe:0x%X urbs:%d avail:%d\n",
+ pipe->logical_pipe_num, pipe->usb_pipe_handle,
+ pipe->urb_alloc, pipe->urb_cnt);
+
+ if (pipe->urb_alloc != pipe->urb_cnt) {
+ ath10k_dbg(ar, ATH10K_DBG_USB,
+ "urb leak! lpipe:%d hpipe:0x%X urbs:%d avail:%d\n",
+ pipe->logical_pipe_num, pipe->usb_pipe_handle,
+ pipe->urb_alloc, pipe->urb_cnt);
+ }
+
+ while (true) {
+ struct ath10k_urb_context *urb_context;
+
+ urb_context = ath10k_usb_alloc_urb_from_pipe(pipe);
+ if (!urb_context)
+ break;
+ kfree(urb_context);
+ }
+}
+
+static void ath10k_usb_cleanup_pipe_resources(struct ath10k *ar)
+{
+ int i;
+ struct ath10k_usb *ar_usb = ath10k_usb_priv(ar);
+
+ for (i = 0; i < ATH10K_USB_PIPE_MAX; i++)
+ ath10k_usb_free_pipe_resources(ar, &ar_usb->pipes[i]);
+}
+
+/* hif usb rx/tx completion functions */
+
+static void ath10k_usb_recv_complete(struct urb *urb)
+{
+ struct ath10k_urb_context *urb_context = urb->context;
+ struct ath10k_usb_pipe *pipe = urb_context->pipe;
+ struct ath10k *ar = pipe->ar_usb->ar;
+ struct sk_buff *skb = NULL;
+ int status = 0;
+
+ ath10k_dbg(ar, ATH10K_DBG_USB_BULK,
+ "%s: recv pipe: %d, stat:%d, len:%d urb:0x%p\n", __func__,
+ pipe->logical_pipe_num, urb->status, urb->actual_length,
+ urb);
+
+ if (urb->status != 0) {
+ status = -EIO;
+ switch (urb->status) {
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* no need to spew these errors when device
+ * removed or urb killed due to driver shutdown
+ */
+ status = -ECANCELED;
+ break;
+ default:
+ ath10k_dbg(ar, ATH10K_DBG_USB_BULK,
+ "%s recv pipe: %d (ep:0x%2.2X), failed:%d\n",
+ __func__, pipe->logical_pipe_num,
+ pipe->ep_address, urb->status);
+ break;
+ }
+ goto cleanup_recv_urb;
+ }
+
+ if (urb->actual_length == 0)
+ goto cleanup_recv_urb;
+
+ skb = urb_context->skb;
+
+ /* we are going to pass it up */
+ urb_context->skb = NULL;
+ skb_put(skb, urb->actual_length);
+
+ /* note: queue implements a lock */
+ skb_queue_tail(&pipe->io_comp_queue, skb);
+ schedule_work(&pipe->io_complete_work);
+
+cleanup_recv_urb:
+ ath10k_usb_cleanup_recv_urb(urb_context);
+
+ if (status == 0 &&
+ pipe->urb_cnt >= pipe->urb_cnt_thresh) {
+ /* our free urbs are piling up, post more transfers */
+ ath10k_usb_post_recv_transfers(ar, pipe);
+ }
+}
+
+static void ath10k_usb_transmit_complete(struct urb *urb)
+{
+ struct ath10k_urb_context *urb_context = urb->context;
+ struct ath10k_usb_pipe *pipe = urb_context->pipe;
+ struct ath10k *ar = pipe->ar_usb->ar;
+ struct sk_buff *skb;
+
+ if (urb->status != 0) {
+ ath10k_dbg(ar, ATH10K_DBG_USB_BULK,
+ "pipe: %d, failed:%d\n",
+ pipe->logical_pipe_num, urb->status);
+ }
+
+ skb = urb_context->skb;
+ urb_context->skb = NULL;
+ ath10k_usb_free_urb_to_pipe(urb_context->pipe, urb_context);
+
+ /* note: queue implements a lock */
+ skb_queue_tail(&pipe->io_comp_queue, skb);
+ schedule_work(&pipe->io_complete_work);
+}
+
+/* pipe operations */
+static void ath10k_usb_post_recv_transfers(struct ath10k *ar,
+ struct ath10k_usb_pipe *recv_pipe)
+{
+ struct ath10k_urb_context *urb_context;
+ struct urb *urb;
+ int usb_status;
+
+ while (true) {
+ urb_context = ath10k_usb_alloc_urb_from_pipe(recv_pipe);
+ if (!urb_context)
+ break;
+
+ urb_context->skb = dev_alloc_skb(ATH10K_USB_RX_BUFFER_SIZE);
+ if (!urb_context->skb)
+ goto err;
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb)
+ goto err;
+
+ usb_fill_bulk_urb(urb,
+ recv_pipe->ar_usb->udev,
+ recv_pipe->usb_pipe_handle,
+ urb_context->skb->data,
+ ATH10K_USB_RX_BUFFER_SIZE,
+ ath10k_usb_recv_complete, urb_context);
+
+ ath10k_dbg(ar, ATH10K_DBG_USB_BULK,
+ "bulk recv submit:%d, 0x%X (ep:0x%2.2X), %d bytes buf:0x%p\n",
+ recv_pipe->logical_pipe_num,
+ recv_pipe->usb_pipe_handle, recv_pipe->ep_address,
+ ATH10K_USB_RX_BUFFER_SIZE, urb_context->skb);
+
+ usb_anchor_urb(urb, &recv_pipe->urb_submitted);
+ usb_status = usb_submit_urb(urb, GFP_ATOMIC);
+
+ if (usb_status) {
+ ath10k_dbg(ar, ATH10K_DBG_USB_BULK,
+ "usb bulk recv failed %d\n",
+ usb_status);
+ usb_unanchor_urb(urb);
+ usb_free_urb(urb);
+ goto err;
+ }
+ usb_free_urb(urb);
+ }
+
+ return;
+
+err:
+ ath10k_usb_cleanup_recv_urb(urb_context);
+}
+
+static void ath10k_usb_flush_all(struct ath10k *ar)
+{
+ int i;
+ struct ath10k_usb *ar_usb = ath10k_usb_priv(ar);
+
+ for (i = 0; i < ATH10K_USB_PIPE_MAX; i++) {
+ if (ar_usb->pipes[i].ar_usb) {
+ usb_kill_anchored_urbs(&ar_usb->pipes[i].urb_submitted);
+ cancel_work_sync(&ar_usb->pipes[i].io_complete_work);
+ }
+ }
+}
+
+static void ath10k_usb_start_recv_pipes(struct ath10k *ar)
+{
+ struct ath10k_usb *ar_usb = ath10k_usb_priv(ar);
+
+ ar_usb->pipes[ATH10K_USB_PIPE_RX_DATA].urb_cnt_thresh = 1;
+
+ ath10k_usb_post_recv_transfers(ar,
+ &ar_usb->pipes[ATH10K_USB_PIPE_RX_DATA]);
+}
+
+static void ath10k_usb_tx_complete(struct ath10k *ar, struct sk_buff *skb)
+{
+ struct ath10k_htc_ep *ep;
+ struct ath10k_htc_hdr *htc_hdr;
+
+ htc_hdr = (struct ath10k_htc_hdr *)skb->data;
+ ep = &ar->htc.endpoint[htc_hdr->eid];
+ ath10k_htc_notify_tx_completion(ep, skb);
+ /* The TX complete handler now owns the skb... */
+}
+
+static void ath10k_usb_rx_complete(struct ath10k *ar, struct sk_buff *skb)
+{
+ int ret;
+ struct ath10k_htc_ep *ep;
+ struct ath10k_htc_hdr *htc_hdr;
+ struct ath10k_htc *htc = &ar->htc;
+ u16 payload_len;
+ enum ath10k_htc_ep_id eid;
+
+ htc_hdr = (struct ath10k_htc_hdr *)skb->data;
+ eid = eid_from_htc_hdr(htc_hdr);
+ ep = &ar->htc.endpoint[eid];
+
+ if (ep->service_id == 0) {
+ ath10k_warn(ar, "ep %d is not connected !\n", eid);
+ goto out_free_skb;
+ }
+
+ payload_len = le16_to_cpu(htc_hdr->len);
+ if (!payload_len) {
+ ath10k_warn(ar, "Zero length frame received! Possible fw crash?\n");
+ goto out_free_skb;
+ }
+
+ if (payload_len < htc_hdr->trailer_len) {
+ ath10k_warn(ar, "Malformed frame received! Possible fw crash?\n");
+ goto out_free_skb;
+ }
+
+ if (htc_hdr->flags & ATH10K_HTC_FLAG_TRAILER_PRESENT) {
+ u8 *trailer;
+
+ trailer = skb->data + sizeof(*htc_hdr) + payload_len -
+ htc_hdr->trailer_len;
+
+ ret = ath10k_htc_process_trailer(htc,
+ trailer,
+ htc_hdr->trailer_len,
+ eid,
+ NULL,
+ NULL);
+ if (ret)
+ goto out_free_skb;
+
+ if (is_trailer_only_msg(htc_hdr))
+ goto out_free_skb;
+
+ /* strip off the trailer from the skb since it should not
+ * be passed on to upper layers
+ */
+ skb_trim(skb, skb->len - htc_hdr->trailer_len);
+ }
+
+ skb_pull(skb, sizeof(*htc_hdr));
+ ep->ep_ops.ep_rx_complete(ar, skb);
+ /* The RX complete handler now owns the skb... */
+
+ return;
+
+out_free_skb:
+ dev_kfree_skb(skb);
+}
+
+static void ath10k_usb_io_comp_work(struct work_struct *work)
+{
+ struct ath10k_usb_pipe *pipe = container_of(work,
+ struct ath10k_usb_pipe,
+ io_complete_work);
+ struct ath10k *ar = pipe->ar_usb->ar;
+ struct sk_buff *skb;
+
+ while ((skb = skb_dequeue(&pipe->io_comp_queue))) {
+ if (pipe->flags & ATH10K_USB_PIPE_FLAG_TX)
+ ath10k_usb_tx_complete(ar, skb);
+ else
+ ath10k_usb_rx_complete(ar, skb);
+ }
+}
+
+#define ATH10K_USB_MAX_DIAG_CMD (sizeof(struct ath10k_usb_ctrl_diag_cmd_write))
+#define ATH10K_USB_MAX_DIAG_RESP (sizeof(struct ath10k_usb_ctrl_diag_resp_read))
+
+static void ath10k_usb_destroy(struct ath10k *ar)
+{
+ struct ath10k_usb *ar_usb = ath10k_usb_priv(ar);
+
+ ath10k_usb_flush_all(ar);
+ ath10k_usb_cleanup_pipe_resources(ar);
+ usb_set_intfdata(ar_usb->interface, NULL);
+
+ kfree(ar_usb->diag_cmd_buffer);
+ kfree(ar_usb->diag_resp_buffer);
+}
+
+static int ath10k_usb_hif_start(struct ath10k *ar)
+{
+ int i;
+ struct ath10k_usb *ar_usb = ath10k_usb_priv(ar);
+
+ ath10k_usb_start_recv_pipes(ar);
+
+ /* set the TX resource avail threshold for each TX pipe */
+ for (i = ATH10K_USB_PIPE_TX_CTRL;
+ i <= ATH10K_USB_PIPE_TX_DATA_HP; i++) {
+ ar_usb->pipes[i].urb_cnt_thresh =
+ ar_usb->pipes[i].urb_alloc / 2;
+ }
+
+ return 0;
+}
+
+static int ath10k_usb_hif_tx_sg(struct ath10k *ar, u8 pipe_id,
+ struct ath10k_hif_sg_item *items, int n_items)
+{
+ int ret, i;
+ struct ath10k_usb *ar_usb = ath10k_usb_priv(ar);
+ struct ath10k_usb_pipe *pipe = &ar_usb->pipes[pipe_id];
+ struct ath10k_urb_context *urb_context;
+ struct urb *urb;
+
+ for (i = 0; i < n_items; i++) {
+ struct sk_buff *skb;
+
+ urb_context = ath10k_usb_alloc_urb_from_pipe(pipe);
+ if (!urb_context) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ skb = items[i].transfer_context;
+ urb_context->skb = skb;
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ ret = -ENOMEM;
+ goto err_free_urb_to_pipe;
+ }
+
+ usb_fill_bulk_urb(urb,
+ ar_usb->udev,
+ pipe->usb_pipe_handle,
+ skb->data,
+ skb->len,
+ ath10k_usb_transmit_complete, urb_context);
+
+ if (!(skb->len % pipe->max_packet_size)) {
+ /* hit a max packet boundary on this pipe */
+ urb->transfer_flags |= URB_ZERO_PACKET;
+ }
+
+ usb_anchor_urb(urb, &pipe->urb_submitted);
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret) {
+ ath10k_dbg(ar, ATH10K_DBG_USB_BULK,
+ "usb bulk transmit failed %d\n", ret);
+ usb_unanchor_urb(urb);
+ ret = -EINVAL;
+ goto err_free_urb_to_pipe;
+ }
+
+ usb_free_urb(urb);
+ }
+
+ return 0;
+
+err_free_urb_to_pipe:
+ ath10k_usb_free_urb_to_pipe(urb_context->pipe, urb_context);
+err:
+ return ret;
+}
+
+static void ath10k_usb_hif_stop(struct ath10k *ar)
+{
+ ath10k_usb_flush_all(ar);
+}
+
+static u16 ath10k_usb_hif_get_free_queue_number(struct ath10k *ar, u8 pipe_id)
+{
+ struct ath10k_usb *ar_usb = ath10k_usb_priv(ar);
+
+ return ar_usb->pipes[pipe_id].urb_cnt;
+}
+
+static int ath10k_usb_submit_ctrl_out(struct ath10k *ar,
+ u8 req, u16 value, u16 index, void *data,
+ u32 size)
+{
+ int ret;
+ struct ath10k_usb *ar_usb = ath10k_usb_priv(ar);
+ u8 *buf = NULL;
+
+ if (size > 0) {
+ buf = kmemdup(data, size, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ }
+
+ /* note: if successful returns number of bytes transferred */
+ ret = usb_control_msg(ar_usb->udev,
+ usb_sndctrlpipe(ar_usb->udev, 0),
+ req,
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE, value, index, buf,
+ size, 1000);
+
+ if (ret < 0) {
+ ath10k_warn(ar, "Failed to submit usb control message: %d\n",
+ ret);
+ kfree(buf);
+ return ret;
+ }
+
+ kfree(buf);
+
+ return 0;
+}
+
+static int ath10k_usb_submit_ctrl_in(struct ath10k *ar,
+ u8 req, u16 value, u16 index, void *data,
+ u32 size)
+{
+ int ret;
+ struct ath10k_usb *ar_usb = ath10k_usb_priv(ar);
+ u8 *buf = NULL;
+
+ if (size > 0) {
+ buf = kmalloc(size, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ }
+
+ /* note: if successful returns number of bytes transferred */
+ ret = usb_control_msg(ar_usb->udev,
+ usb_rcvctrlpipe(ar_usb->udev, 0),
+ req,
+ USB_DIR_IN | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE, value, index, buf,
+ size, 2 * HZ);
+
+ if (ret < 0) {
+ ath10k_warn(ar, "Failed to read usb control message: %d\n",
+ ret);
+ kfree(buf);
+ return ret;
+ }
+
+ memcpy((u8 *)data, buf, size);
+
+ kfree(buf);
+
+ return 0;
+}
+
+static int ath10k_usb_ctrl_msg_exchange(struct ath10k *ar,
+ u8 req_val, u8 *req_buf, u32 req_len,
+ u8 resp_val, u8 *resp_buf,
+ u32 *resp_len)
+{
+ int ret;
+
+ /* send command */
+ ret = ath10k_usb_submit_ctrl_out(ar, req_val, 0, 0,
+ req_buf, req_len);
+ if (ret)
+ goto err;
+
+ /* get response */
+ if (resp_buf) {
+ ret = ath10k_usb_submit_ctrl_in(ar, resp_val, 0, 0,
+ resp_buf, *resp_len);
+ if (ret)
+ goto err;
+ }
+
+ return 0;
+err:
+ return ret;
+}
+
+static int ath10k_usb_hif_diag_read(struct ath10k *ar, u32 address, void *buf,
+ size_t buf_len)
+{
+ int ret;
+ struct ath10k_usb *ar_usb = ath10k_usb_priv(ar);
+ struct ath10k_usb_ctrl_diag_cmd_read *cmd;
+ u32 resp_len;
+
+ if (buf_len < sizeof(struct ath10k_usb_ctrl_diag_resp_read)) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ cmd = (struct ath10k_usb_ctrl_diag_cmd_read *)ar_usb->diag_cmd_buffer;
+ memset(cmd, 0, sizeof(*cmd));
+ cmd->cmd = ATH10K_USB_CTRL_DIAG_CC_READ;
+ cmd->address = cpu_to_le32(address);
+ resp_len = sizeof(struct ath10k_usb_ctrl_diag_resp_read);
+
+ ret = ath10k_usb_ctrl_msg_exchange(ar,
+ ATH10K_USB_CONTROL_REQ_DIAG_CMD,
+ (u8 *)cmd,
+ sizeof(*cmd),
+ ATH10K_USB_CONTROL_REQ_DIAG_RESP,
+ ar_usb->diag_resp_buffer, &resp_len);
+ if (ret)
+ goto err;
+
+ if (resp_len != sizeof(struct ath10k_usb_ctrl_diag_resp_read)) {
+ ret = -EMSGSIZE;
+ goto err;
+ }
+
+ memcpy(buf, ar_usb->diag_resp_buffer,
+ sizeof(struct ath10k_usb_ctrl_diag_resp_read));
+ return 0;
+err:
+ return ret;
+}
+
+static int ath10k_usb_hif_diag_write(struct ath10k *ar, u32 address,
+ const void *data, int nbytes)
+{
+ int ret;
+ struct ath10k_usb *ar_usb = ath10k_usb_priv(ar);
+ struct ath10k_usb_ctrl_diag_cmd_write *cmd;
+
+ if (nbytes != sizeof(cmd->value)) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ cmd = (struct ath10k_usb_ctrl_diag_cmd_write *)ar_usb->diag_cmd_buffer;
+ memset(cmd, 0, sizeof(*cmd));
+ cmd->cmd = cpu_to_le32(ATH10K_USB_CTRL_DIAG_CC_WRITE);
+ cmd->address = cpu_to_le32(address);
+ memcpy(&cmd->value, data, nbytes);
+
+ ret = ath10k_usb_ctrl_msg_exchange(ar,
+ ATH10K_USB_CONTROL_REQ_DIAG_CMD,
+ (u8 *)cmd,
+ sizeof(*cmd),
+ 0, NULL, NULL);
+ if (ret)
+ goto err;
+
+ return 0;
+err:
+ return ret;
+}
+
+static int ath10k_usb_bmi_exchange_msg(struct ath10k *ar,
+ void *req, u32 req_len,
+ void *resp, u32 *resp_len)
+{
+ int ret;
+
+ if (req) {
+ ret = ath10k_usb_submit_ctrl_out(ar,
+ ATH10K_USB_CONTROL_REQ_SEND_BMI_CMD,
+ 0, 0, req, req_len);
+ if (ret) {
+ ath10k_warn(ar,
+ "unable to send the bmi data to the device: %d\n",
+ ret);
+ goto err;
+ }
+ }
+
+ if (resp) {
+ ret = ath10k_usb_submit_ctrl_in(ar,
+ ATH10K_USB_CONTROL_REQ_RECV_BMI_RESP,
+ 0, 0, resp, *resp_len);
+ if (ret) {
+ ath10k_warn(ar,
+ "Unable to read the bmi data from the device: %d\n",
+ ret);
+ goto err;
+ }
+ }
+
+ return 0;
+err:
+ return ret;
+}
+
+static void ath10k_usb_hif_get_default_pipe(struct ath10k *ar,
+ u8 *ul_pipe, u8 *dl_pipe)
+{
+ *ul_pipe = ATH10K_USB_PIPE_TX_CTRL;
+ *dl_pipe = ATH10K_USB_PIPE_RX_CTRL;
+}
+
+static int ath10k_usb_hif_map_service_to_pipe(struct ath10k *ar, u16 svc_id,
+ u8 *ul_pipe, u8 *dl_pipe)
+{
+ int ret = 0;
+
+ switch (svc_id) {
+ case ATH10K_HTC_SVC_ID_RSVD_CTRL:
+ case ATH10K_HTC_SVC_ID_WMI_CONTROL:
+ *ul_pipe = ATH10K_USB_PIPE_TX_CTRL;
+ /* due to large control packets, shift to data pipe */
+ *dl_pipe = ATH10K_USB_PIPE_RX_DATA;
+ break;
+ case ATH10K_HTC_SVC_ID_HTT_DATA_MSG:
+ *ul_pipe = ATH10K_USB_PIPE_TX_DATA_LP;
+ /* Disable rxdata2 directly, it will be enabled
+ * if FW enable rxdata2
+ */
+ *dl_pipe = ATH10K_USB_PIPE_RX_DATA;
+ break;
+ default:
+ ret = -EPERM;
+ break;
+ }
+
+ return ret;
+}
+
+/* This op is currently only used by htc_wait_target if the HTC ready
+ * message times out. It is not applicable for USB since there is nothing
+ * we can do if the HTC ready message does not arrive in time.
+ * TODO: Make this op non mandatory by introducing a NULL check in the
+ * hif op wrapper.
+ */
+static void ath10k_usb_hif_send_complete_check(struct ath10k *ar,
+ u8 pipe, int force)
+{
+}
+
+static int ath10k_usb_hif_power_up(struct ath10k *ar)
+{
+ return 0;
+}
+
+static void ath10k_usb_hif_power_down(struct ath10k *ar)
+{
+ ath10k_usb_flush_all(ar);
+}
+
+#ifdef CONFIG_PM
+
+static int ath10k_usb_hif_suspend(struct ath10k *ar)
+{
+ return -EOPNOTSUPP;
+}
+
+static int ath10k_usb_hif_resume(struct ath10k *ar)
+{
+ return -EOPNOTSUPP;
+}
+#endif
+
+static const struct ath10k_hif_ops ath10k_usb_hif_ops = {
+ .tx_sg = ath10k_usb_hif_tx_sg,
+ .diag_read = ath10k_usb_hif_diag_read,
+ .diag_write = ath10k_usb_hif_diag_write,
+ .exchange_bmi_msg = ath10k_usb_bmi_exchange_msg,
+ .start = ath10k_usb_hif_start,
+ .stop = ath10k_usb_hif_stop,
+ .map_service_to_pipe = ath10k_usb_hif_map_service_to_pipe,
+ .get_default_pipe = ath10k_usb_hif_get_default_pipe,
+ .send_complete_check = ath10k_usb_hif_send_complete_check,
+ .get_free_queue_number = ath10k_usb_hif_get_free_queue_number,
+ .power_up = ath10k_usb_hif_power_up,
+ .power_down = ath10k_usb_hif_power_down,
+#ifdef CONFIG_PM
+ .suspend = ath10k_usb_hif_suspend,
+ .resume = ath10k_usb_hif_resume,
+#endif
+};
+
+static u8 ath10k_usb_get_logical_pipe_num(u8 ep_address, int *urb_count)
+{
+ u8 pipe_num = ATH10K_USB_PIPE_INVALID;
+
+ switch (ep_address) {
+ case ATH10K_USB_EP_ADDR_APP_CTRL_IN:
+ pipe_num = ATH10K_USB_PIPE_RX_CTRL;
+ *urb_count = RX_URB_COUNT;
+ break;
+ case ATH10K_USB_EP_ADDR_APP_DATA_IN:
+ pipe_num = ATH10K_USB_PIPE_RX_DATA;
+ *urb_count = RX_URB_COUNT;
+ break;
+ case ATH10K_USB_EP_ADDR_APP_INT_IN:
+ pipe_num = ATH10K_USB_PIPE_RX_INT;
+ *urb_count = RX_URB_COUNT;
+ break;
+ case ATH10K_USB_EP_ADDR_APP_DATA2_IN:
+ pipe_num = ATH10K_USB_PIPE_RX_DATA2;
+ *urb_count = RX_URB_COUNT;
+ break;
+ case ATH10K_USB_EP_ADDR_APP_CTRL_OUT:
+ pipe_num = ATH10K_USB_PIPE_TX_CTRL;
+ *urb_count = TX_URB_COUNT;
+ break;
+ case ATH10K_USB_EP_ADDR_APP_DATA_LP_OUT:
+ pipe_num = ATH10K_USB_PIPE_TX_DATA_LP;
+ *urb_count = TX_URB_COUNT;
+ break;
+ case ATH10K_USB_EP_ADDR_APP_DATA_MP_OUT:
+ pipe_num = ATH10K_USB_PIPE_TX_DATA_MP;
+ *urb_count = TX_URB_COUNT;
+ break;
+ case ATH10K_USB_EP_ADDR_APP_DATA_HP_OUT:
+ pipe_num = ATH10K_USB_PIPE_TX_DATA_HP;
+ *urb_count = TX_URB_COUNT;
+ break;
+ default:
+ /* note: there may be endpoints not currently used */
+ break;
+ }
+
+ return pipe_num;
+}
+
+static int ath10k_usb_alloc_pipe_resources(struct ath10k *ar,
+ struct ath10k_usb_pipe *pipe,
+ int urb_cnt)
+{
+ int ret, i;
+ struct ath10k_urb_context *urb_context;
+
+ INIT_LIST_HEAD(&pipe->urb_list_head);
+ init_usb_anchor(&pipe->urb_submitted);
+
+ for (i = 0; i < urb_cnt; i++) {
+ urb_context = kzalloc(sizeof(*urb_context), GFP_KERNEL);
+ if (!urb_context) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ urb_context->pipe = pipe;
+
+ /* we are only allocate the urb contexts here, the actual URB
+ * is allocated from the kernel as needed to do a transaction
+ */
+ pipe->urb_alloc++;
+ ath10k_usb_free_urb_to_pipe(pipe, urb_context);
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_USB,
+ "alloc resources lpipe:%d hpipe:0x%X urbs:%d\n",
+ pipe->logical_pipe_num, pipe->usb_pipe_handle,
+ pipe->urb_alloc);
+
+ return 0;
+err:
+ return ret;
+}
+
+static int ath10k_usb_setup_pipe_resources(struct ath10k *ar,
+ struct usb_interface *interface)
+{
+ int ret = 0, i, urbcount;
+ struct ath10k_usb *ar_usb = ath10k_usb_priv(ar);
+ struct usb_host_interface *iface_desc = interface->cur_altsetting;
+ struct usb_endpoint_descriptor *endpoint;
+ struct ath10k_usb_pipe *pipe;
+ u8 pipe_num;
+
+ ath10k_dbg(ar, ATH10K_DBG_USB, "setting up USB Pipes using interface\n");
+
+ /* walk decriptors and setup pipes */
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+ endpoint = &iface_desc->endpoint[i].desc;
+
+ if (ATH10K_USB_IS_BULK_EP(endpoint->bmAttributes)) {
+ ath10k_dbg(ar, ATH10K_DBG_USB,
+ "%s Bulk Ep:0x%2.2X maxpktsz:%d\n",
+ ATH10K_USB_IS_DIR_IN
+ (endpoint->bEndpointAddress) ?
+ "RX" : "TX", endpoint->bEndpointAddress,
+ le16_to_cpu(endpoint->wMaxPacketSize));
+ } else if (ATH10K_USB_IS_INT_EP(endpoint->bmAttributes)) {
+ ath10k_dbg(ar, ATH10K_DBG_USB,
+ "%s Int Ep:0x%2.2X maxpktsz:%d interval:%d\n",
+ ATH10K_USB_IS_DIR_IN
+ (endpoint->bEndpointAddress) ?
+ "RX" : "TX", endpoint->bEndpointAddress,
+ le16_to_cpu(endpoint->wMaxPacketSize),
+ endpoint->bInterval);
+ } else if (ATH10K_USB_IS_ISOC_EP(endpoint->bmAttributes)) {
+ /* TODO for ISO */
+ ath10k_dbg(ar, ATH10K_DBG_USB,
+ "%s ISOC Ep:0x%2.2X maxpktsz:%d interval:%d\n",
+ ATH10K_USB_IS_DIR_IN
+ (endpoint->bEndpointAddress) ?
+ "RX" : "TX", endpoint->bEndpointAddress,
+ le16_to_cpu(endpoint->wMaxPacketSize),
+ endpoint->bInterval);
+ }
+ urbcount = 0;
+
+ pipe_num =
+ ath10k_usb_get_logical_pipe_num(endpoint->bEndpointAddress,
+ &urbcount);
+ if (pipe_num == ATH10K_USB_PIPE_INVALID)
+ continue;
+
+ pipe = &ar_usb->pipes[pipe_num];
+ if (pipe->ar_usb) {
+ /* hmmm..pipe was already setup */
+ continue;
+ }
+
+ pipe->ar_usb = ar_usb;
+ pipe->logical_pipe_num = pipe_num;
+ pipe->ep_address = endpoint->bEndpointAddress;
+ pipe->max_packet_size = le16_to_cpu(endpoint->wMaxPacketSize);
+
+ if (ATH10K_USB_IS_BULK_EP(endpoint->bmAttributes)) {
+ if (ATH10K_USB_IS_DIR_IN(pipe->ep_address)) {
+ pipe->usb_pipe_handle =
+ usb_rcvbulkpipe(ar_usb->udev,
+ pipe->ep_address);
+ } else {
+ pipe->usb_pipe_handle =
+ usb_sndbulkpipe(ar_usb->udev,
+ pipe->ep_address);
+ }
+ } else if (ATH10K_USB_IS_INT_EP(endpoint->bmAttributes)) {
+ if (ATH10K_USB_IS_DIR_IN(pipe->ep_address)) {
+ pipe->usb_pipe_handle =
+ usb_rcvintpipe(ar_usb->udev,
+ pipe->ep_address);
+ } else {
+ pipe->usb_pipe_handle =
+ usb_sndintpipe(ar_usb->udev,
+ pipe->ep_address);
+ }
+ } else if (ATH10K_USB_IS_ISOC_EP(endpoint->bmAttributes)) {
+ /* TODO for ISO */
+ if (ATH10K_USB_IS_DIR_IN(pipe->ep_address)) {
+ pipe->usb_pipe_handle =
+ usb_rcvisocpipe(ar_usb->udev,
+ pipe->ep_address);
+ } else {
+ pipe->usb_pipe_handle =
+ usb_sndisocpipe(ar_usb->udev,
+ pipe->ep_address);
+ }
+ }
+
+ pipe->ep_desc = endpoint;
+
+ if (!ATH10K_USB_IS_DIR_IN(pipe->ep_address))
+ pipe->flags |= ATH10K_USB_PIPE_FLAG_TX;
+
+ ret = ath10k_usb_alloc_pipe_resources(ar, pipe, urbcount);
+ if (ret != 0)
+ break;
+ }
+
+ return ret;
+}
+
+static int ath10k_usb_create(struct ath10k *ar,
+ struct usb_interface *interface)
+{
+ int ret = 0, i;
+ struct ath10k_usb *ar_usb = ath10k_usb_priv(ar);
+ struct usb_device *dev = interface_to_usbdev(interface);
+ struct ath10k_usb_pipe *pipe;
+
+ usb_set_intfdata(interface, ar_usb);
+ spin_lock_init(&ar_usb->cs_lock);
+ ar_usb->udev = dev;
+ ar_usb->interface = interface;
+
+ for (i = 0; i < ATH10K_USB_PIPE_MAX; i++) {
+ pipe = &ar_usb->pipes[i];
+ INIT_WORK(&pipe->io_complete_work,
+ ath10k_usb_io_comp_work);
+ skb_queue_head_init(&pipe->io_comp_queue);
+ }
+
+ ar_usb->diag_cmd_buffer = kzalloc(ATH10K_USB_MAX_DIAG_CMD, GFP_KERNEL);
+ if (!ar_usb->diag_cmd_buffer) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ar_usb->diag_resp_buffer = kzalloc(ATH10K_USB_MAX_DIAG_RESP,
+ GFP_KERNEL);
+ if (!ar_usb->diag_resp_buffer) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ret = ath10k_usb_setup_pipe_resources(ar, interface);
+ if (ret)
+ goto err;
+
+ return 0;
+err:
+ ath10k_usb_destroy(ar);
+ return ret;
+}
+
+/* ath10k usb driver registered functions */
+static int ath10k_usb_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ int ret, vendor_id, product_id;
+ struct ath10k_usb *ar_usb;
+ struct ath10k *ar;
+ struct usb_device *dev = interface_to_usbdev(interface);
+ u32 chip_id;
+ enum ath10k_hw_rev hw_rev;
+
+ /* Assumption: All USB based chipsets (so far) are QCA9377 based.
+ * If there will be newer chipsets that does not use the hw reg
+ * setup as defined in qca6174_regs and qca6174_values, this
+ * assumption is no longer valid and hw_rev must be setup differently
+ * depending on chipset.
+ */
+ hw_rev = ATH10K_HW_QCA9377;
+
+ ar = ath10k_core_create(sizeof(*ar_usb), &dev->dev, ATH10K_BUS_USB,
+ hw_rev, &ath10k_usb_hif_ops);
+ if (!ar) {
+ dev_err(&dev->dev, "failed to allocate core\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ usb_get_dev(dev);
+ vendor_id = le16_to_cpu(dev->descriptor.idVendor);
+ product_id = le16_to_cpu(dev->descriptor.idProduct);
+
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "usb new func: vendor 0x%04x, product 0x%04x\n",
+ vendor_id, product_id);
+
+ ar_usb = ath10k_usb_priv(ar);
+ ret = ath10k_usb_create(ar, interface);
+ ar_usb->ar = ar;
+
+ ar->dev_id = product_id;
+ ar->id.vendor = vendor_id;
+ ar->id.device = product_id;
+
+ /* TODO: don't know yet how to get chip_id with USB */
+ chip_id = 0;
+ ret = ath10k_core_register(ar, chip_id);
+ if (ret) {
+ ath10k_warn(ar, "failed to register driver core: %d\n", ret);
+ goto err;
+ }
+
+ /* TODO: remove this once USB support is fully implemented */
+ ath10k_warn(ar, "WARNING: ath10k USB support is incomplete, don't expect anything to work!\n");
+
+ return 0;
+
+err:
+ usb_put_dev(dev);
+ return ret;
+}
+
+static void ath10k_usb_remove(struct usb_interface *interface)
+{
+ struct ath10k_usb *ar_usb;
+
+ ar_usb = usb_get_intfdata(interface);
+ if (!ar_usb)
+ return;
+
+ ath10k_core_unregister(ar_usb->ar);
+ ath10k_usb_destroy(ar_usb->ar);
+ usb_put_dev(interface_to_usbdev(interface));
+ ath10k_core_destroy(ar_usb->ar);
+}
+
+#ifdef CONFIG_PM
+
+static int ath10k_usb_pm_suspend(struct usb_interface *interface,
+ pm_message_t message)
+{
+ struct ath10k_usb *ar_usb = usb_get_intfdata(interface);
+
+ ath10k_usb_flush_all(ar_usb->ar);
+ return 0;
+}
+
+static int ath10k_usb_pm_resume(struct usb_interface *interface)
+{
+ struct ath10k_usb *ar_usb = usb_get_intfdata(interface);
+ struct ath10k *ar = ar_usb->ar;
+
+ ath10k_usb_post_recv_transfers(ar,
+ &ar_usb->pipes[ATH10K_USB_PIPE_RX_DATA]);
+
+ return 0;
+}
+
+#else
+
+#define ath10k_usb_pm_suspend NULL
+#define ath10k_usb_pm_resume NULL
+
+#endif
+
+/* table of devices that work with this driver */
+static struct usb_device_id ath10k_usb_ids[] = {
+ {USB_DEVICE(0x13b1, 0x0042)}, /* Linksys WUSB6100M */
+ { /* Terminating entry */ },
+};
+
+MODULE_DEVICE_TABLE(usb, ath10k_usb_ids);
+
+static struct usb_driver ath10k_usb_driver = {
+ .name = "ath10k_usb",
+ .probe = ath10k_usb_probe,
+ .suspend = ath10k_usb_pm_suspend,
+ .resume = ath10k_usb_pm_resume,
+ .disconnect = ath10k_usb_remove,
+ .id_table = ath10k_usb_ids,
+ .supports_autosuspend = true,
+ .disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(ath10k_usb_driver);
+
+MODULE_AUTHOR("Atheros Communications, Inc.");
+MODULE_DESCRIPTION("Driver support for Atheros AR600x USB devices");
+MODULE_LICENSE("Dual BSD/GPL");
new file mode 100644
@@ -0,0 +1,128 @@
+/*
+ * Copyright (c) 2004-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2012 Qualcomm Atheros, Inc.
+ * Copyright (c) 2016-2017 Erik Stromdahl <erik.stromdahl@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _USB_H_
+#define _USB_H_
+
+/* constants */
+#define TX_URB_COUNT 32
+#define RX_URB_COUNT 32
+#define ATH10K_USB_RX_BUFFER_SIZE 4096
+
+#define ATH10K_USB_PIPE_INVALID ATH10K_USB_PIPE_MAX
+
+/* USB endpoint definitions */
+#define ATH10K_USB_EP_ADDR_APP_CTRL_IN 0x81
+#define ATH10K_USB_EP_ADDR_APP_DATA_IN 0x82
+#define ATH10K_USB_EP_ADDR_APP_DATA2_IN 0x83
+#define ATH10K_USB_EP_ADDR_APP_INT_IN 0x84
+
+#define ATH10K_USB_EP_ADDR_APP_CTRL_OUT 0x01
+#define ATH10K_USB_EP_ADDR_APP_DATA_LP_OUT 0x02
+#define ATH10K_USB_EP_ADDR_APP_DATA_MP_OUT 0x03
+#define ATH10K_USB_EP_ADDR_APP_DATA_HP_OUT 0x04
+
+/* diagnostic command defnitions */
+#define ATH10K_USB_CONTROL_REQ_SEND_BMI_CMD 1
+#define ATH10K_USB_CONTROL_REQ_RECV_BMI_RESP 2
+#define ATH10K_USB_CONTROL_REQ_DIAG_CMD 3
+#define ATH10K_USB_CONTROL_REQ_DIAG_RESP 4
+
+#define ATH10K_USB_CTRL_DIAG_CC_READ 0
+#define ATH10K_USB_CTRL_DIAG_CC_WRITE 1
+
+#define ATH10K_USB_IS_BULK_EP(attr) (((attr) & 3) == 0x02)
+#define ATH10K_USB_IS_INT_EP(attr) (((attr) & 3) == 0x03)
+#define ATH10K_USB_IS_ISOC_EP(attr) (((attr) & 3) == 0x01)
+#define ATH10K_USB_IS_DIR_IN(addr) ((addr) & 0x80)
+
+struct ath10k_usb_ctrl_diag_cmd_write {
+ __le32 cmd;
+ __le32 address;
+ __le32 value;
+ __le32 padding;
+} __packed;
+
+struct ath10k_usb_ctrl_diag_cmd_read {
+ __le32 cmd;
+ __le32 address;
+} __packed;
+
+struct ath10k_usb_ctrl_diag_resp_read {
+ u8 value[4];
+} __packed;
+
+/* tx/rx pipes for usb */
+enum ath10k_usb_pipe_id {
+ ATH10K_USB_PIPE_TX_CTRL = 0,
+ ATH10K_USB_PIPE_TX_DATA_LP,
+ ATH10K_USB_PIPE_TX_DATA_MP,
+ ATH10K_USB_PIPE_TX_DATA_HP,
+ ATH10K_USB_PIPE_RX_CTRL,
+ ATH10K_USB_PIPE_RX_DATA,
+ ATH10K_USB_PIPE_RX_DATA2,
+ ATH10K_USB_PIPE_RX_INT,
+ ATH10K_USB_PIPE_MAX
+};
+
+struct ath10k_usb_pipe {
+ struct list_head urb_list_head;
+ struct usb_anchor urb_submitted;
+ u32 urb_alloc;
+ u32 urb_cnt;
+ u32 urb_cnt_thresh;
+ unsigned int usb_pipe_handle;
+ u32 flags;
+ u8 ep_address;
+ u8 logical_pipe_num;
+ struct ath10k_usb *ar_usb;
+ u16 max_packet_size;
+ struct work_struct io_complete_work;
+ struct sk_buff_head io_comp_queue;
+ struct usb_endpoint_descriptor *ep_desc;
+};
+
+#define ATH10K_USB_PIPE_FLAG_TX BIT(0)
+
+/* usb device object */
+struct ath10k_usb {
+ /* protects pipe->urb_list_head and pipe->urb_cnt */
+ spinlock_t cs_lock;
+
+ struct usb_device *udev;
+ struct usb_interface *interface;
+ struct ath10k_usb_pipe pipes[ATH10K_USB_PIPE_MAX];
+ u8 *diag_cmd_buffer;
+ u8 *diag_resp_buffer;
+ struct ath10k *ar;
+};
+
+/* usb urb object */
+struct ath10k_urb_context {
+ struct list_head link;
+ struct ath10k_usb_pipe *pipe;
+ struct sk_buff *skb;
+ struct ath10k *ar;
+};
+
+static inline struct ath10k_usb *ath10k_usb_priv(struct ath10k *ar)
+{
+ return (struct ath10k_usb *)ar->drv_priv;
+}
+
+#endif
Chipsets like QCA9377 have support for USB so add initial USB bus support to ath10k. With this patch we have the low level HIF and HTC protocol working and it's possible to boot the firmware, but it's still not possible to connect or anything like. More changes are needed for full functionality. For that reason we print during initialisation: WARNING: ath10k USB support is incomplete, don't expect anything to work! Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> --- drivers/net/wireless/ath/ath10k/Kconfig | 7 + drivers/net/wireless/ath/ath10k/Makefile | 3 + drivers/net/wireless/ath/ath10k/usb.c | 1128 ++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/usb.h | 128 ++++ 4 files changed, 1266 insertions(+) create mode 100644 drivers/net/wireless/ath/ath10k/usb.c create mode 100644 drivers/net/wireless/ath/ath10k/usb.h