| Message ID | 1526313137-23899-1-git-send-email-greearb@candelatech.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 05/14/2018 08:52 AM, greearb@candelatech.com wrote: > From: Ben Greear <greearb@candelatech.com> > > These feature flags are used by ath10k-ct firmware. Add these > so we can use them in future patches and so there are no warnings > about feature flags on loading ath10k-ct firmware. Hello Kalle, Any chance you could apply this series? It has been sitting in patchwork in new state with no feedback for months (last I checked). I've plenty more patches after this to provide better support for my firmware, and some of it will probably also be useful for stock firmware. If I can get these initial patches in, I'll cook up some more and post them. Thanks, Ben > > Signed-off-by: Ben Greear <greearb@candelatech.com> > --- > v2: Fix warings typo in description. > > drivers/net/wireless/ath/ath10k/core.c | 17 +++++++++ > drivers/net/wireless/ath/ath10k/core.h | 67 ++++++++++++++++++++++++++++++++++ > 2 files changed, 84 insertions(+) > > diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c > index 4cf54a7..f2f8f61 100644 > --- a/drivers/net/wireless/ath/ath10k/core.c > +++ b/drivers/net/wireless/ath/ath10k/core.c > @@ -552,6 +552,23 @@ static const char *const ath10k_core_fw_feature_str[] = { > [ATH10K_FW_FEATURE_NO_PS] = "no-ps", > [ATH10K_FW_FEATURE_MGMT_TX_BY_REF] = "mgmt-tx-by-reference", > [ATH10K_FW_FEATURE_NON_BMI] = "non-bmi", > + [ATH10K_FW_FEATURE_WMI_10X_CT] = "wmi-10.x-CT", > + [ATH10K_FW_FEATURE_CT_RXSWCRYPT] = "rxswcrypt-CT", > + [ATH10K_FW_FEATURE_HAS_TXSTATUS_NOACK] = "txstatus-noack", > + [ATH10K_FW_FEATURE_CT_RATEMASK] = "ratemask-CT", > + [ATH10K_FW_FEATURE_HAS_SAFE_BURST] = "safe-burst", > + [ATH10K_FW_FEATURE_REGDUMP_CT] = "regdump-CT", > + [ATH10K_FW_FEATURE_TXRATE_CT] = "txrate-CT", > + [ATH10K_FW_FEATURE_FLUSH_ALL_CT] = "flush-all-CT", > + [ATH10K_FW_FEATURE_PINGPONG_READ_CT] = "pingpong-CT", > + [ATH10K_FW_FEATURE_SKIP_CH_RES_CT] = "ch-regs-CT", > + [ATH10K_FW_FEATURE_NOP_CT] = "nop-CT", > + [ATH10K_FW_FEATURE_HTT_MGT_CT] = "htt-mgt-CT", > + [ATH10K_FW_FEATURE_SET_SPECIAL_CT] = "set-special-CT", > + [ATH10K_FW_FEATURE_NO_BMISS_CT] = "no-bmiss-CT", > + [ATH10K_FW_FEATURE_HAS_GET_TEMP_CT] = "get-temp-CT", > + [ATH10K_FW_FEATURE_HAS_TX_RC_CT] = "tx-rc-CT", > + [ATH10K_FW_FEATURE_CUST_STATS_CT] = "cust-stats-CT", > }; > > static unsigned int ath10k_core_get_fw_feature_str(char *buf, > diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h > index e4ac8f2..c1342c5 100644 > --- a/drivers/net/wireless/ath/ath10k/core.h > +++ b/drivers/net/wireless/ath/ath10k/core.h > @@ -711,6 +711,73 @@ enum ath10k_fw_features { > /* Firmware load is done externally, not by bmi */ > ATH10K_FW_FEATURE_NON_BMI = 19, > > + /* tx-status has the noack bits (CT firmware version 14 and higher ) */ > + ATH10K_FW_FEATURE_HAS_TXSTATUS_NOACK = 30, > + > + /* Firmware from Candela Technologies, enables more VIFs, etc */ > + ATH10K_FW_FEATURE_WMI_10X_CT = 31, > + > + /* Firmware from Candela Technologies with rx-software-crypt. > + * Required for multiple stations connected to same AP when using > + * encryption (ie, commercial version of CT firmware) > + */ > + ATH10K_FW_FEATURE_CT_RXSWCRYPT = 32, > + > + /* Firmware supports extended wmi_common_peer_assoc_complete_cmd that > + * contains an array of rate-disable masks. This allows the host to > + * have better control over what rates the firmware will use. CT > + * Firmware only (v15 and higher) > + */ > + ATH10K_FW_FEATURE_CT_RATEMASK = 33, > + > + /* Versions of firmware before approximately 10.2.4.72 would corrupt > + * txop fields during burst. Since this is fixed now, add a flag to > + * denote this. > + */ > + ATH10K_FW_FEATURE_HAS_SAFE_BURST = 34, > + > + /* Register-dump is supported. */ > + ATH10K_FW_FEATURE_REGDUMP_CT = 35, > + > + /* TX-Rate is reported. */ > + ATH10K_FW_FEATURE_TXRATE_CT = 36, > + > + /* Firmware can flush all peers. */ > + ATH10K_FW_FEATURE_FLUSH_ALL_CT = 37, > + > + /* Firmware can read memory with ping-pong protocol. */ > + ATH10K_FW_FEATURE_PINGPONG_READ_CT = 38, > + > + /* Firmware can skip channel reservation. */ > + ATH10K_FW_FEATURE_SKIP_CH_RES_CT = 39, > + > + /* Firmware supports NOP keep-alive message. */ > + ATH10K_FW_FEATURE_NOP_CT = 40, > + > + /* Firmware supports CT HTT MGT feature. */ > + ATH10K_FW_FEATURE_HTT_MGT_CT = 41, > + > + /* Set-special cmd-id is supported. */ > + ATH10K_FW_FEATURE_SET_SPECIAL_CT = 42, > + > + /* SW Beacon Miss is disabled in this kernel, so you have to > + * let mac80211 manage the connection. > + */ > + ATH10K_FW_FEATURE_NO_BMISS_CT = 43, > + > + /* 10.1 firmware that supports getting temperature. Stock > + * 10.1 cannot. > + */ > + ATH10K_FW_FEATURE_HAS_GET_TEMP_CT = 44, > + > + /* Can peer-id be over-ridden to provide rix + retries for raw pkts? > + * CT only option. > + */ > + ATH10K_FW_FEATURE_HAS_TX_RC_CT = 45, > + > + /* Do we support requesting custom stats */ > + ATH10K_FW_FEATURE_CUST_STATS_CT = 46, > + > /* keep last */ > ATH10K_FW_FEATURE_COUNT, > }; >
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 4cf54a7..f2f8f61 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -552,6 +552,23 @@ static const char *const ath10k_core_fw_feature_str[] = { [ATH10K_FW_FEATURE_NO_PS] = "no-ps", [ATH10K_FW_FEATURE_MGMT_TX_BY_REF] = "mgmt-tx-by-reference", [ATH10K_FW_FEATURE_NON_BMI] = "non-bmi", + [ATH10K_FW_FEATURE_WMI_10X_CT] = "wmi-10.x-CT", + [ATH10K_FW_FEATURE_CT_RXSWCRYPT] = "rxswcrypt-CT", + [ATH10K_FW_FEATURE_HAS_TXSTATUS_NOACK] = "txstatus-noack", + [ATH10K_FW_FEATURE_CT_RATEMASK] = "ratemask-CT", + [ATH10K_FW_FEATURE_HAS_SAFE_BURST] = "safe-burst", + [ATH10K_FW_FEATURE_REGDUMP_CT] = "regdump-CT", + [ATH10K_FW_FEATURE_TXRATE_CT] = "txrate-CT", + [ATH10K_FW_FEATURE_FLUSH_ALL_CT] = "flush-all-CT", + [ATH10K_FW_FEATURE_PINGPONG_READ_CT] = "pingpong-CT", + [ATH10K_FW_FEATURE_SKIP_CH_RES_CT] = "ch-regs-CT", + [ATH10K_FW_FEATURE_NOP_CT] = "nop-CT", + [ATH10K_FW_FEATURE_HTT_MGT_CT] = "htt-mgt-CT", + [ATH10K_FW_FEATURE_SET_SPECIAL_CT] = "set-special-CT", + [ATH10K_FW_FEATURE_NO_BMISS_CT] = "no-bmiss-CT", + [ATH10K_FW_FEATURE_HAS_GET_TEMP_CT] = "get-temp-CT", + [ATH10K_FW_FEATURE_HAS_TX_RC_CT] = "tx-rc-CT", + [ATH10K_FW_FEATURE_CUST_STATS_CT] = "cust-stats-CT", }; static unsigned int ath10k_core_get_fw_feature_str(char *buf, diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index e4ac8f2..c1342c5 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -711,6 +711,73 @@ enum ath10k_fw_features { /* Firmware load is done externally, not by bmi */ ATH10K_FW_FEATURE_NON_BMI = 19, + /* tx-status has the noack bits (CT firmware version 14 and higher ) */ + ATH10K_FW_FEATURE_HAS_TXSTATUS_NOACK = 30, + + /* Firmware from Candela Technologies, enables more VIFs, etc */ + ATH10K_FW_FEATURE_WMI_10X_CT = 31, + + /* Firmware from Candela Technologies with rx-software-crypt. + * Required for multiple stations connected to same AP when using + * encryption (ie, commercial version of CT firmware) + */ + ATH10K_FW_FEATURE_CT_RXSWCRYPT = 32, + + /* Firmware supports extended wmi_common_peer_assoc_complete_cmd that + * contains an array of rate-disable masks. This allows the host to + * have better control over what rates the firmware will use. CT + * Firmware only (v15 and higher) + */ + ATH10K_FW_FEATURE_CT_RATEMASK = 33, + + /* Versions of firmware before approximately 10.2.4.72 would corrupt + * txop fields during burst. Since this is fixed now, add a flag to + * denote this. + */ + ATH10K_FW_FEATURE_HAS_SAFE_BURST = 34, + + /* Register-dump is supported. */ + ATH10K_FW_FEATURE_REGDUMP_CT = 35, + + /* TX-Rate is reported. */ + ATH10K_FW_FEATURE_TXRATE_CT = 36, + + /* Firmware can flush all peers. */ + ATH10K_FW_FEATURE_FLUSH_ALL_CT = 37, + + /* Firmware can read memory with ping-pong protocol. */ + ATH10K_FW_FEATURE_PINGPONG_READ_CT = 38, + + /* Firmware can skip channel reservation. */ + ATH10K_FW_FEATURE_SKIP_CH_RES_CT = 39, + + /* Firmware supports NOP keep-alive message. */ + ATH10K_FW_FEATURE_NOP_CT = 40, + + /* Firmware supports CT HTT MGT feature. */ + ATH10K_FW_FEATURE_HTT_MGT_CT = 41, + + /* Set-special cmd-id is supported. */ + ATH10K_FW_FEATURE_SET_SPECIAL_CT = 42, + + /* SW Beacon Miss is disabled in this kernel, so you have to + * let mac80211 manage the connection. + */ + ATH10K_FW_FEATURE_NO_BMISS_CT = 43, + + /* 10.1 firmware that supports getting temperature. Stock + * 10.1 cannot. + */ + ATH10K_FW_FEATURE_HAS_GET_TEMP_CT = 44, + + /* Can peer-id be over-ridden to provide rix + retries for raw pkts? + * CT only option. + */ + ATH10K_FW_FEATURE_HAS_TX_RC_CT = 45, + + /* Do we support requesting custom stats */ + ATH10K_FW_FEATURE_CUST_STATS_CT = 46, + /* keep last */ ATH10K_FW_FEATURE_COUNT, };