@@ -91,6 +91,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
.shadow_reg_support = false,
.rri_on_ddr = false,
+ .hw_filter_reset_required = true,
},
{
.id = QCA988X_HW_2_0_VERSION,
@@ -124,6 +125,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.per_ce_irq = false,
.shadow_reg_support = false,
.rri_on_ddr = false,
+ .hw_filter_reset_required = true,
},
{
.id = QCA9887_HW_1_0_VERSION,
@@ -157,6 +159,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.per_ce_irq = false,
.shadow_reg_support = false,
.rri_on_ddr = false,
+ .hw_filter_reset_required = true,
},
{
.id = QCA6174_HW_2_1_VERSION,
@@ -189,6 +192,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.per_ce_irq = false,
.shadow_reg_support = false,
.rri_on_ddr = false,
+ .hw_filter_reset_required = true,
},
{
.id = QCA6174_HW_2_1_VERSION,
@@ -221,6 +225,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.per_ce_irq = false,
.shadow_reg_support = false,
.rri_on_ddr = false,
+ .hw_filter_reset_required = true,
},
{
.id = QCA6174_HW_3_0_VERSION,
@@ -253,6 +258,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.per_ce_irq = false,
.shadow_reg_support = false,
.rri_on_ddr = false,
+ .hw_filter_reset_required = true,
},
{
.id = QCA6174_HW_3_2_VERSION,
@@ -288,6 +294,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.per_ce_irq = false,
.shadow_reg_support = false,
.rri_on_ddr = false,
+ .hw_filter_reset_required = true,
},
{
.id = QCA99X0_HW_2_0_DEV_VERSION,
@@ -326,6 +333,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.per_ce_irq = false,
.shadow_reg_support = false,
.rri_on_ddr = false,
+ .hw_filter_reset_required = true,
},
{
.id = QCA9984_HW_1_0_DEV_VERSION,
@@ -369,6 +377,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.per_ce_irq = false,
.shadow_reg_support = false,
.rri_on_ddr = false,
+ .hw_filter_reset_required = true,
},
{
.id = QCA9888_HW_2_0_DEV_VERSION,
@@ -411,6 +420,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.per_ce_irq = false,
.shadow_reg_support = false,
.rri_on_ddr = false,
+ .hw_filter_reset_required = true,
},
{
.id = QCA9377_HW_1_0_DEV_VERSION,
@@ -443,6 +453,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.per_ce_irq = false,
.shadow_reg_support = false,
.rri_on_ddr = false,
+ .hw_filter_reset_required = true,
},
{
.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -477,6 +488,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.per_ce_irq = false,
.shadow_reg_support = false,
.rri_on_ddr = false,
+ .hw_filter_reset_required = true,
},
{
.id = QCA4019_HW_1_0_DEV_VERSION,
@@ -516,6 +528,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.per_ce_irq = false,
.shadow_reg_support = false,
.rri_on_ddr = false,
+ .hw_filter_reset_required = true,
},
{
.id = WCN3990_HW_1_0_DEV_VERSION,
@@ -539,6 +552,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.per_ce_irq = true,
.shadow_reg_support = true,
.rri_on_ddr = true,
+ .hw_filter_reset_required = false,
},
};
@@ -2414,7 +2428,8 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
* possible to implicitly make it correct by creating a dummy vdev and
* then deleting it.
*/
- if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
+ if (ar->hw_params.hw_filter_reset_required &&
+ mode == ATH10K_FIRMWARE_MODE_NORMAL) {
status = ath10k_core_reset_rx_filter(ar);
if (status) {
ath10k_err(ar,
@@ -589,6 +589,11 @@ struct ath10k_hw_params {
/* Number of bytes to be the offset for each FFT sample */
int spectral_bin_offset;
+
+ /* targets which require hw filter reset during boot up,
+ * to avoid it sending spurious acks.
+ */
+ bool hw_filter_reset_required;
};
struct htt_rx_desc;
WCN3990 has the MAC_PCU_ADDR1 configured properly and hence it will not send spurious ack frames during boot up. Hence the reset_rx_filter workaround is not needed for WCN3990. Add a hw_param to indicate if hardware rx filter reset is needed and skip the reset_rx_filter for WCN3990. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> --- drivers/net/wireless/ath/ath10k/core.c | 17 ++++++++++++++++- drivers/net/wireless/ath/ath10k/hw.h | 5 +++++ 2 files changed, 21 insertions(+), 1 deletion(-)