@@ -494,6 +494,7 @@ struct ath10k_sta {
u32 smps;
u16 peer_id;
struct rate_info txrate;
+ struct ieee80211_tx_info tx_info;
struct work_struct update_wk;
u64 rx_duration;
@@ -2627,7 +2627,7 @@ void ath10k_htt_htc_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
dev_kfree_skb_any(skb);
}
-static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
+static inline s8 ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
{
static const u8 legacy_rates[] = {1, 2, 5, 11, 6, 9, 12,
18, 24, 36, 48, 54};
@@ -2646,7 +2646,7 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
ath10k_accumulate_per_peer_tx_stats(struct ath10k *ar,
struct ath10k_sta *arsta,
struct ath10k_per_peer_tx_stats *pstats,
- u8 legacy_rate_idx)
+ s8 legacy_rate_idx)
{
struct rate_info *txrate = &arsta->txrate;
struct ath10k_htt_tx_stats *tx_stats;
@@ -2768,8 +2768,11 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
struct ath10k_per_peer_tx_stats *peer_stats)
{
struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
- u8 rate = 0, rate_idx = 0, sgi;
+ struct ieee80211_chanctx_conf *conf = NULL;
struct rate_info txrate;
+ u8 rate = 0, sgi;
+ s8 rate_idx = 0;
+ bool skip_auto_rate;
lockdep_assert_held(&ar->data_lock);
@@ -2778,6 +2781,13 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
txrate.nss = ATH10K_HW_NSS(peer_stats->ratecode);
txrate.mcs = ATH10K_HW_MCS_RATE(peer_stats->ratecode);
sgi = ATH10K_HW_GI(peer_stats->flags);
+ skip_auto_rate = ATH10K_FW_SKIPPED_RATE_CTRL(peer_stats->flags);
+
+ /* Firmware's rate control skips broadcast/management frames,
+ * if host has configure fixed rates and in some other special cases.
+ */
+ if (skip_auto_rate)
+ return;
if (txrate.flags == WMI_RATE_PREAMBLE_VHT && txrate.mcs > 9) {
ath10k_warn(ar, "Invalid VHT mcs %hhd peer stats", txrate.mcs);
@@ -2792,7 +2802,7 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
}
memset(&arsta->txrate, 0, sizeof(arsta->txrate));
-
+ memset(&arsta->tx_info.status, 0, sizeof(arsta->tx_info.status));
if (txrate.flags == WMI_RATE_PREAMBLE_CCK ||
txrate.flags == WMI_RATE_PREAMBLE_OFDM) {
rate = ATH10K_HW_LEGACY_RATE(peer_stats->ratecode);
@@ -2811,11 +2821,59 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
arsta->txrate.mcs = txrate.mcs;
}
- if (sgi)
- arsta->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+ switch (txrate.flags) {
+ case WMI_RATE_PREAMBLE_OFDM:
+ if (arsta->arvif && arsta->arvif->vif)
+ conf = rcu_dereference(arsta->arvif->vif->chanctx_conf);
+ if (conf && conf->def.chan->band == NL80211_BAND_5GHZ)
+ arsta->tx_info.status.rates[0].idx = rate_idx - 4;
+ break;
+ case WMI_RATE_PREAMBLE_CCK:
+ arsta->tx_info.status.rates[0].idx = rate_idx;
+ if (sgi)
+ arsta->tx_info.status.rates[0].flags |=
+ (IEEE80211_TX_RC_USE_SHORT_PREAMBLE |
+ IEEE80211_TX_RC_SHORT_GI);
+ break;
+ case WMI_RATE_PREAMBLE_HT:
+ arsta->tx_info.status.rates[0].idx =
+ txrate.mcs + ((txrate.nss - 1) * 8);
+ if (sgi)
+ arsta->tx_info.status.rates[0].flags |=
+ IEEE80211_TX_RC_SHORT_GI;
+ arsta->tx_info.status.rates[0].flags |= IEEE80211_TX_RC_MCS;
+ break;
+ case WMI_RATE_PREAMBLE_VHT:
+ ieee80211_rate_set_vht(&arsta->tx_info.status.rates[0],
+ txrate.mcs, txrate.nss);
+ if (sgi)
+ arsta->tx_info.status.rates[0].flags |=
+ IEEE80211_TX_RC_SHORT_GI;
+ arsta->tx_info.status.rates[0].flags |= IEEE80211_TX_RC_VHT_MCS;
+ break;
+ }
arsta->txrate.nss = txrate.nss;
arsta->txrate.bw = ath10k_bw_to_mac80211_bw(txrate.bw);
+ if (sgi)
+ arsta->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+
+ switch (arsta->txrate.bw) {
+ case RATE_INFO_BW_40:
+ arsta->tx_info.status.rates[0].flags |=
+ IEEE80211_TX_RC_40_MHZ_WIDTH;
+ break;
+ case RATE_INFO_BW_80:
+ arsta->tx_info.status.rates[0].flags |=
+ IEEE80211_TX_RC_80_MHZ_WIDTH;
+ break;
+ }
+
+ if (peer_stats->succ_pkts) {
+ arsta->tx_info.flags = IEEE80211_TX_STAT_ACK;
+ arsta->tx_info.status.rates[0].count = 1;
+ ieee80211_tx_rate_update(ar->hw, sta, &arsta->tx_info);
+ }
if (ath10k_debug_is_extd_tx_stats_enabled(ar))
ath10k_accumulate_per_peer_tx_stats(ar, arsta, peer_stats,
@@ -4984,6 +4984,7 @@ enum wmi_rate_preamble {
(((preamble) << 6) | ((nss) << 4) | (rate))
#define ATH10K_HW_AMPDU(flags) ((flags) & 0x1)
#define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3)
+#define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1)
#define ATH10K_VHT_MCS_NUM 10
#define ATH10K_BW_NUM 4
Mesh path metric needs tx rate information from ieee80211_tx_status() call but in ath10k there is no mechanism to report tx rate information via ieee80211_tx_status(), the tx rate is only accessible via sta_statiscs() op. Per peer tx stats has tx rate info available, Tx rate is available to ath10k driver after every 4 PPDU sent in the air. For each PPDU, ath10k driver updates rate informattion to mac80211 using ieee80211_tx_rate_update(). Per peer txrate information is updated through per peer statistics and is available for QCA9888/QCA9984/QCA4019/QCA998X only Tested on QCA9984 with firmware-5.bin_10.4-3.5.3-00053 Tested on QCA998X with firmware-5.bin_10.2.4-1.0-00036 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> --- drivers/net/wireless/ath/ath10k/core.h | 1 + drivers/net/wireless/ath/ath10k/htt_rx.c | 70 +++++++++++++++++++++++++++--- drivers/net/wireless/ath/ath10k/wmi.h | 1 + 3 files changed, 66 insertions(+), 6 deletions(-)