diff mbox series

[PATCHv5,5/9] nl80211: Add netlink attribute to configure TID specific tx rate

Message ID 1553592550-15282-6-git-send-email-tamizhr@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series cfg80211/mac80211: Add support for TID specific configuration | expand

Commit Message

Tamizh chelvam March 26, 2019, 9:29 a.m. UTC 
Introduce NL80211_ATTR_TID_CONFIG_TX_RATES in nl80211_attr_tid_config
to accept data TID specific TX bitrate configuration
through NL80211_CMD_SET_TID_CONFIG command. TID for which the
this configuration is to be applied is passed in
NL80211_ATTR_TID_CONFIG_TID attribute. TX bitrate mask values passed
in NL80211_ATTR_TX_RATES attribute and NL80211_ATTR_TID_CONFIG_TX_RATES
attribute will have types of the TX rate should be applied.
When the user-space wants this configuration peer specific
rather than being applied for all the connected stations,
MAC address of the peer can be passed in NL80211_ATTR_MAC attribute.

Driver supporting this feature should advertise
NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK and supporting per-STA data TID
TX bitrate configuration should advertise
NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK.

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
 include/net/cfg80211.h       |    5 +++
 include/uapi/linux/nl80211.h |   39 ++++++++++++++++++
 net/wireless/nl80211.c       |   89 ++++++++++++++++++++++++++++++++----------
 3 files changed, 113 insertions(+), 20 deletions(-)

Comments

Johannes Berg April 26, 2019, 9:37 a.m. UTC | #1 
> @@ -13354,6 +13367,42 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
>  			nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL]);
>  	}
>  
> +	if (attrs[NL80211_ATTR_TID_CONFIG_TX_RATES_TYPE]) {
> +		int idx;
> +		enum nl80211_attrs attr;
> +
> +		if (!wiphy_ext_feature_isset(&rdev->wiphy,
> +				NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK))
> +			return -EOPNOTSUPP;
> +
> +		if (peer &&
> +		    !wiphy_ext_feature_isset(&rdev->wiphy,
> +				NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK))
> +			return -EOPNOTSUPP;
> +
> +		idx = NL80211_ATTR_TID_CONFIG_TX_RATES_TYPE;
> +		tid_conf->txrate_type = nla_get_u8(attrs[idx]);
> +
> +		tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_TX_BITRATE;
> +		if (tid_conf->txrate_type != NL80211_TX_RATE_AUTOMATIC) {
> +			tid_conf->mask =
> +				kzalloc(sizeof(struct cfg80211_bitrate_mask),
> +					GFP_KERNEL);

You leak this

> +			if (!tid_conf->mask)
> +				return -ENOMEM;
> +
> +			attr = NL80211_ATTR_TID_CONFIG_TX_RATES;
> +			ret = nl80211_parse_tx_bitrate_mask(attrs, rdev, attr,
> +							    tid_conf->mask);
> +			if (ret) {
> +				kfree(tid_conf->mask);
> +				return ret;
> +			}
> +		} else {
> +			tid_conf->mask = NULL;
> +		}
> +	}
> +
>  	return 0;
>  }
>  
> @@ -13407,7 +13456,7 @@ static int nl80211_set_tid_config(struct sk_buff *skb,
>  		}
>  
>  		ret = parse_tid_conf(rdev, attrs, &tid_conf->tid_conf[conf_idx],
> -				     tid_conf->peer);
> +				     info, tid_conf->peer);
>  		if (ret)
>  			goto bad_tid_conf;

Practically everywhere, but particularly in the bad case in the next
loop iteration etc?

johannes
Tamizh chelvam April 30, 2019, 9:58 a.m. UTC | #2 
On 2019-04-26 15:07, Johannes Berg wrote:
>> @@ -13354,6 +13367,42 @@ static int parse_tid_conf(struct 
>> cfg80211_registered_device *rdev,
>>  			nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL]);
>>  	}
>> 
>> +	if (attrs[NL80211_ATTR_TID_CONFIG_TX_RATES_TYPE]) {
>> +		int idx;
>> +		enum nl80211_attrs attr;
>> +
>> +		if (!wiphy_ext_feature_isset(&rdev->wiphy,
>> +				NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK))
>> +			return -EOPNOTSUPP;
>> +
>> +		if (peer &&
>> +		    !wiphy_ext_feature_isset(&rdev->wiphy,
>> +				NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK))
>> +			return -EOPNOTSUPP;
>> +
>> +		idx = NL80211_ATTR_TID_CONFIG_TX_RATES_TYPE;
>> +		tid_conf->txrate_type = nla_get_u8(attrs[idx]);
>> +
>> +		tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_TX_BITRATE;
>> +		if (tid_conf->txrate_type != NL80211_TX_RATE_AUTOMATIC) {
>> +			tid_conf->mask =
>> +				kzalloc(sizeof(struct cfg80211_bitrate_mask),
>> +					GFP_KERNEL);
> 
> You leak this
> 
>> +			if (!tid_conf->mask)
>> +				return -ENOMEM;
>> +
>> +			attr = NL80211_ATTR_TID_CONFIG_TX_RATES;
>> +			ret = nl80211_parse_tx_bitrate_mask(attrs, rdev, attr,
>> +							    tid_conf->mask);
>> +			if (ret) {
>> +				kfree(tid_conf->mask);
>> +				return ret;
>> +			}
>> +		} else {
>> +			tid_conf->mask = NULL;
>> +		}
>> +	}
>> +
>>  	return 0;
>>  }
>> 
>> @@ -13407,7 +13456,7 @@ static int nl80211_set_tid_config(struct 
>> sk_buff *skb,
>>  		}
>> 
>>  		ret = parse_tid_conf(rdev, attrs, &tid_conf->tid_conf[conf_idx],
>> -				     tid_conf->peer);
>> +				     info, tid_conf->peer);
>>  		if (ret)
>>  			goto bad_tid_conf;
> 
> Practically everywhere, but particularly in the bad case in the next
> loop iteration etc?
> 
Yeah. I will fix this in next version.
diff mbox series

Patch

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 86dee3d..ebf041b 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -514,6 +514,7 @@  enum ieee80211_tid_conf_mask {
 	IEEE80211_TID_CONF_RETRY	= BIT(1),
 	IEEE80211_TID_CONF_AMPDU	= BIT(2),
 	IEEE80211_TID_CONF_RTSCTS	= BIT(3),
+	IEEE80211_TID_CONF_TX_BITRATE	= BIT(4),
 };
 
 /**
@@ -526,6 +527,8 @@  enum ieee80211_tid_conf_mask {
  * @retry_short: retry count value
  * @ampdu: Enable/Disable aggregation
  * @rtscts: Enable/Disable RTS/CTS
+ * @txrate_type: TX bitrate mask type
+ * @mask: bitrate to be applied for the TID
  */
 struct ieee80211_tid_cfg {
 	u8 tid;
@@ -535,6 +538,8 @@  struct ieee80211_tid_cfg {
 	int retry_short;
 	u8 ampdu;
 	u8 rtscts;
+	enum nl80211_tx_rate_setting txrate_type;
+	struct cfg80211_bitrate_mask *mask;
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 996b4d4..c8aa3ba 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4557,6 +4557,18 @@  enum nl80211_tx_power_setting {
 	NL80211_TX_POWER_FIXED,
 };
 
+/**
+ * enum nl80211_tx_rate_setting - TX rate configuration type
+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate
+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter
+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter
+ */
+enum nl80211_tx_rate_setting {
+	NL80211_TX_RATE_AUTOMATIC,
+	NL80211_TX_RATE_LIMITED,
+	NL80211_TX_RATE_FIXED,
+};
+
 enum nl80211_tid_config {
 	NL80211_TID_CONFIG_DEFAULT,
 	NL80211_TID_CONFIG_ENABLE,
@@ -4645,6 +4657,25 @@  enum nl80211_tid_config {
  *	NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL and supporting per station
  *	RTS_CTS configuration should advertise
  *	NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL.
+ * @NL80211_ATTR_TID_CONFIG_TX_RATES: Data frame TX rate mask should be applied
+ *	with the parameters passed through %NL80211_ATTR_TX_RATES. This
+ *	configuration is per TID, TID is specified with
+ *	%NL80211_ATTR_TID_CONFIG_TID.
+ *	If the peer MAC address is passed in %NL80211_ATTR_MAC, then this
+ *	configuration is applied to the data frame for the tid to that connected
+ *	station. This attribute will be useful to notfiy the driver that what
+ *	type of txrate should be applied(%enum enum nl80211_tx_rate_setting)
+ *	for the connected station (%NL80211_ATTR_MAC),
+ *	Station specific retry configuration is valid only for STA's
+ *	current connection. i.e. the configuration will be reset to default when
+ *	the station connects back after disconnection/roaming.
+ *	when user-space does not include %NL80211_ATTR_MAC, this configuration
+ *	should be treated as per-netdev configuration. This configuration will
+ *	be cleared when the interface goes down and on the disconnection from a
+ *	BSS. Driver supporting this feature should advertise
+ *	NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK and supporting per station
+ *	TX bitrate configuration should advertise
+ *	NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK.
  */
 enum nl80211_attr_tid_config {
 	__NL80211_ATTR_TID_INVALID,
@@ -4655,6 +4686,8 @@  enum nl80211_attr_tid_config {
 	NL80211_ATTR_TID_CONFIG_RETRY_LONG,
 	NL80211_ATTR_TID_CONFIG_AMPDU_CTRL,
 	NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL,
+	NL80211_ATTR_TID_CONFIG_TX_RATES_TYPE,
+	NL80211_ATTR_TID_CONFIG_TX_RATES,
 
 	/* keep last */
 	__NL80211_ATTR_TID_CONFIG_AFTER_LAST,
@@ -5477,6 +5510,10 @@  enum nl80211_feature_flags {
  *	RTS_CTS control(enable/disable).
  * @NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL: Driver supports STA specific
  *	RTS_CTS control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK: Driver supports TID specific
+ *	TX bitrate configuration.
+ * @NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK: Driver supports STA specific
+ *	TX bitrate configuration.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5527,6 +5564,8 @@  enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL,
 	NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL,
 	NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL,
+	NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK,
+	NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 9e5c58c..05f6158 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -280,6 +280,15 @@  static int validate_ie_attr(const struct nlattr *attr,
 		NLA_POLICY_NESTED_ARRAY(nl80211_psmr_peer_attr_policy),
 };
 
+static const struct nla_policy nl80211_txattr_policy[NL80211_TXRATE_MAX + 1] = {
+	[NL80211_TXRATE_LEGACY] = { .type = NLA_BINARY,
+				    .len = NL80211_MAX_SUPP_RATES },
+	[NL80211_TXRATE_HT] = { .type = NLA_BINARY,
+				.len = NL80211_MAX_SUPP_HT_RATES },
+	[NL80211_TXRATE_VHT] = { .len = sizeof(struct nl80211_txrate_vht)},
+	[NL80211_TXRATE_GI] = { .type = NLA_U8 },
+};
+
 static const struct nla_policy
 nl80211_attr_tid_config_policy[NL80211_ATTR_TID_CONFIG_MAX + 1] = {
 	[NL80211_ATTR_TID_CONFIG_TID] = { .type = NLA_U8 },
@@ -292,6 +301,10 @@  static int validate_ie_attr(const struct nlattr *attr,
 			NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
 	[NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL] =
 			NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+	[NL80211_ATTR_TID_CONFIG_TX_RATES_TYPE] =
+			NLA_POLICY_MAX(NLA_U8, NL80211_TX_RATE_FIXED),
+	[NL80211_ATTR_TID_CONFIG_TX_RATES] =
+			NLA_POLICY_NESTED(nl80211_txattr_policy),
 };
 
 const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -397,7 +410,8 @@  static int validate_ie_attr(const struct nlattr *attr,
 	[NL80211_ATTR_PMKID] = { .len = WLAN_PMKID_LEN },
 	[NL80211_ATTR_DURATION] = { .type = NLA_U32 },
 	[NL80211_ATTR_COOKIE] = { .type = NLA_U64 },
-	[NL80211_ATTR_TX_RATES] = { .type = NLA_NESTED },
+	[NL80211_ATTR_TX_RATES] =
+			NLA_POLICY_NESTED(nl80211_txattr_policy),
 	[NL80211_ATTR_FRAME] = { .type = NLA_BINARY,
 				 .len = IEEE80211_MAX_DATA_LEN },
 	[NL80211_ATTR_FRAME_MATCH] = { .type = NLA_BINARY, },
@@ -4014,20 +4028,12 @@  static bool vht_set_mcs_mask(struct ieee80211_supported_band *sband,
 	return true;
 }
 
-static const struct nla_policy nl80211_txattr_policy[NL80211_TXRATE_MAX + 1] = {
-	[NL80211_TXRATE_LEGACY] = { .type = NLA_BINARY,
-				    .len = NL80211_MAX_SUPP_RATES },
-	[NL80211_TXRATE_HT] = { .type = NLA_BINARY,
-				.len = NL80211_MAX_SUPP_HT_RATES },
-	[NL80211_TXRATE_VHT] = { .len = sizeof(struct nl80211_txrate_vht)},
-	[NL80211_TXRATE_GI] = { .type = NLA_U8 },
-};
-
-static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
+static int nl80211_parse_tx_bitrate_mask(struct nlattr *attrs[],
+					 struct cfg80211_registered_device *rdev,
+					 enum nl80211_attrs attr,
 					 struct cfg80211_bitrate_mask *mask)
 {
 	struct nlattr *tb[NL80211_TXRATE_MAX + 1];
-	struct cfg80211_registered_device *rdev = info->user_ptr[0];
 	int rem, i;
 	struct nlattr *tx_rates;
 	struct ieee80211_supported_band *sband;
@@ -4054,14 +4060,14 @@  static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
 	}
 
 	/* if no rates are given set it back to the defaults */
-	if (!info->attrs[NL80211_ATTR_TX_RATES])
+	if (!attrs[attr])
 		goto out;
 
 	/* The nested attribute uses enum nl80211_band as the index. This maps
 	 * directly to the enum nl80211_band values used in cfg80211.
 	 */
 	BUILD_BUG_ON(NL80211_MAX_SUPP_HT_RATES > IEEE80211_HT_MCS_MASK_LEN * 8);
-	nla_for_each_nested(tx_rates, info->attrs[NL80211_ATTR_TX_RATES], rem) {
+	nla_for_each_nested(tx_rates, attrs[attr], rem) {
 		enum nl80211_band band = nla_type(tx_rates);
 		int err;
 
@@ -4071,7 +4077,7 @@  static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
 		if (sband == NULL)
 			return -EINVAL;
 		err = nla_parse_nested(tb, NL80211_TXRATE_MAX, tx_rates,
-				       nl80211_txattr_policy, info->extack);
+				       NULL, NULL);
 		if (err)
 			return err;
 		if (tb[NL80211_TXRATE_LEGACY]) {
@@ -4504,7 +4510,9 @@  static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 		return -EINVAL;
 
 	if (info->attrs[NL80211_ATTR_TX_RATES]) {
-		err = nl80211_parse_tx_bitrate_mask(info, &params.beacon_rate);
+		err = nl80211_parse_tx_bitrate_mask(info->attrs, rdev,
+						    NL80211_ATTR_TX_RATES,
+						    &params.beacon_rate);
 		if (err)
 			return err;
 
@@ -10110,7 +10118,8 @@  static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
 	if (!rdev->ops->set_bitrate_mask)
 		return -EOPNOTSUPP;
 
-	err = nl80211_parse_tx_bitrate_mask(info, &mask);
+	err = nl80211_parse_tx_bitrate_mask(info->attrs, rdev, NL80211_ATTR_TX_RATES,
+					    &mask);
 	if (err)
 		return err;
 
@@ -10702,7 +10711,9 @@  static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	if (info->attrs[NL80211_ATTR_TX_RATES]) {
-		err = nl80211_parse_tx_bitrate_mask(info, &setup.beacon_rate);
+		err = nl80211_parse_tx_bitrate_mask(info->attrs, rdev,
+						    NL80211_ATTR_TX_RATES,
+						    &setup.beacon_rate);
 		if (err)
 			return err;
 
@@ -13278,8 +13289,10 @@  static int nl80211_get_ftm_responder_stats(struct sk_buff *skb,
 static int parse_tid_conf(struct cfg80211_registered_device *rdev,
 			  struct nlattr *attrs[],
 			  struct ieee80211_tid_cfg *tid_conf,
-			  const u8 *peer)
+			  struct genl_info *info, const u8 *peer)
 {
+	int ret;
+
 	tid_conf->tid = nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_TID]);
 	if (attrs[NL80211_ATTR_TID_CONFIG_NOACK]) {
 		if (!wiphy_ext_feature_isset(&rdev->wiphy,
@@ -13354,6 +13367,42 @@  static int parse_tid_conf(struct cfg80211_registered_device *rdev,
 			nla_get_u8(attrs[NL80211_ATTR_TID_CONFIG_RTSCTS_CTRL]);
 	}
 
+	if (attrs[NL80211_ATTR_TID_CONFIG_TX_RATES_TYPE]) {
+		int idx;
+		enum nl80211_attrs attr;
+
+		if (!wiphy_ext_feature_isset(&rdev->wiphy,
+				NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK))
+			return -EOPNOTSUPP;
+
+		if (peer &&
+		    !wiphy_ext_feature_isset(&rdev->wiphy,
+				NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK))
+			return -EOPNOTSUPP;
+
+		idx = NL80211_ATTR_TID_CONFIG_TX_RATES_TYPE;
+		tid_conf->txrate_type = nla_get_u8(attrs[idx]);
+
+		tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_TX_BITRATE;
+		if (tid_conf->txrate_type != NL80211_TX_RATE_AUTOMATIC) {
+			tid_conf->mask =
+				kzalloc(sizeof(struct cfg80211_bitrate_mask),
+					GFP_KERNEL);
+			if (!tid_conf->mask)
+				return -ENOMEM;
+
+			attr = NL80211_ATTR_TID_CONFIG_TX_RATES;
+			ret = nl80211_parse_tx_bitrate_mask(attrs, rdev, attr,
+							    tid_conf->mask);
+			if (ret) {
+				kfree(tid_conf->mask);
+				return ret;
+			}
+		} else {
+			tid_conf->mask = NULL;
+		}
+	}
+
 	return 0;
 }
 
@@ -13407,7 +13456,7 @@  static int nl80211_set_tid_config(struct sk_buff *skb,
 		}
 
 		ret = parse_tid_conf(rdev, attrs, &tid_conf->tid_conf[conf_idx],
-				     tid_conf->peer);
+				     info, tid_conf->peer);
 		if (ret)
 			goto bad_tid_conf;