@@ -2059,6 +2059,11 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif stop\n");
+ ath10k_pci_irq_disable(ar);
+ ath10k_pci_irq_sync(ar);
+ napi_synchronize(&ar->napi);
+ napi_disable(&ar->napi);
+
/* Most likely the device has HTT Rx ring configured. The only way to
* prevent the device from accessing (and possible corrupting) host
* memory is to reset the chip now.
@@ -2072,10 +2077,6 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
*/
ath10k_pci_safe_chip_reset(ar);
- ath10k_pci_irq_disable(ar);
- ath10k_pci_irq_sync(ar);
- napi_synchronize(&ar->napi);
- napi_disable(&ar->napi);
ath10k_pci_flush(ar);
spin_lock_irqsave(&ar_pci->ps_lock, flags);
On SMP platform, when continuously running wifi up/down, the napi poll can be scheduled during chip reset, which will call ath10k_pci_has_fw_crashed() to check the fw status. But in the reset period, the value from FW_INDICATOR_ADDRESS register will return 0xdeadbeef, which also be treated as fw crash. Fix the issue by moving chip reset after napi disabled. ath10k_pci 0000:01:00.0: firmware crashed! (guid 73b30611-5b1e-4bdd-90b4-64c81eb947b6) ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 ath10k_pci 0000:01:00.0: failed to get memcpy hi address for firmware address 4: -16 ath10k_pci 0000:01:00.0: failed to read firmware dump area: -16 ath10k_pci 0000:01:00.0: Copy Engine register dump: ath10k_pci 0000:01:00.0: [00]: 0x0004a000 0 0 0 0 ath10k_pci 0000:01:00.0: [01]: 0x0004a400 0 0 0 0 ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 0 0 ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 0 ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 0 ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 0 ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 0 ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 0 1 0 ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 0 0 ath10k_pci 0000:01:00.0: [09]: 0x0004c400 0 0 0 0 ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 0 ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 0 Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00035 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> --- drivers/net/wireless/ath/ath10k/pci.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)