@@ -2636,6 +2636,10 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
if (test_bit(WMI_SERVICE_REPORT_AIRTIME, ar->wmi.svc_map))
val |= WMI_10_4_REPORT_AIRTIME;
+ if (test_bit(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
+ ar->wmi.svc_map))
+ val |= WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT;
+
status = ath10k_mac_ext_resource_config(ar, val);
if (status) {
ath10k_err(ar,
@@ -2950,6 +2950,12 @@ static int ath10k_new_peer_tid_config(struct ath10k *ar,
arg.aggr_control = vif->ampdu[i];
arg.rate_ctrl = vif->rate_ctrl[i];
arg.rcode_flags = vif->rate_code[i];
+ if (vif->rtscts[i])
+ arg.ext_tid_cfg_bitmap =
+ WMI_EXT_TID_RTS_CTS_CONFIG;
+ else
+ arg.ext_tid_cfg_bitmap = 0;
+ arg.rtscts_ctrl = vif->rtscts[i];
}
if (vif->noack[i]) {
@@ -6560,6 +6566,10 @@ static int ath10k_mac_validate_rate_mask(struct ath10k *ar,
if (txrate_type == NL80211_TX_RATE_FIXED)
*rate_ctrl = WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE;
+ else if (txrate_type == NL80211_TX_RATE_LIMITED &&
+ (test_bit(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
+ ar->wmi.svc_map)))
+ *rate_ctrl = WMI_PEER_TID_CONFIG_RATE_UPPER_CAP;
else
return -EOPNOTSUPP;
return 0;
@@ -6628,6 +6638,14 @@ static int ath10k_mac_validate_rate_mask(struct ath10k *ar,
}
kfree(tid_conf->mask);
}
+
+ if (changed & IEEE80211_TID_CONF_RTSCTS) {
+ if (tid_conf->rtscts)
+ arg->rtscts_ctrl = tid_conf->rtscts - 1;
+ else
+ arg->rtscts_ctrl = WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE;
+ arg->ext_tid_cfg_bitmap = WMI_EXT_TID_RTS_CTS_CONFIG;
+ }
}
static void ath10k_sta_tid_cfg_wk(struct work_struct *wk)
@@ -6708,6 +6726,18 @@ static void ath10k_sta_tid_cfg_wk(struct work_struct *wk)
}
}
+ if (changed & IEEE80211_TID_CONF_RTSCTS) {
+ if (sta->rtscts[i]) {
+ arg.rtscts_ctrl = 0;
+ arg.ext_tid_cfg_bitmap = 0;
+ } else {
+ arg.rtscts_ctrl = vif->rtscts[i] - 1;
+ arg.ext_tid_cfg_bitmap =
+ WMI_EXT_TID_RTS_CTS_CONFIG;
+ config_apply = true;
+ }
+ }
+
arg.tid = i;
if (config_apply) {
@@ -8403,6 +8433,13 @@ static int ath10k_mac_op_set_tid_config(struct ieee80211_hw *hw,
arg.rate_ctrl = 0;
arg.rcode_flags = 0;
}
+
+ if (changed & IEEE80211_TID_CONF_RTSCTS) {
+ sta->rtscts[arg.tid] =
+ tid_config->tid_conf[i].rtscts;
+ arg.rtscts_ctrl = 0;
+ arg.ext_tid_cfg_bitmap = 0;
+ }
} else {
arvif->tid_conf_changed[arg.tid] |= changed;
@@ -8422,6 +8459,10 @@ static int ath10k_mac_op_set_tid_config(struct ieee80211_hw *hw,
vif->rate_ctrl[arg.tid] = arg.rate_ctrl;
vif->rate_code[arg.tid] = arg.rcode_flags;
}
+
+ if (changed & IEEE80211_TID_CONF_RTSCTS)
+ vif->rtscts[arg.tid] =
+ tid_config->tid_conf[i].rtscts;
}
}
@@ -9168,6 +9209,13 @@ int ath10k_mac_register(struct ath10k *ar)
ar->ops->set_tid_config = NULL;
ar->hw->wiphy->flags &= ~WIPHY_FLAG_HAS_MAX_DATA_RETRY_COUNT;
}
+
+ if (test_bit(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, ar->wmi.svc_map)) {
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL);
+ wiphy_ext_feature_set(ar->hw->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL);
+ }
/*
* on LL hardware queues are managed entirely by the FW
* so we only advertise to mac we can do the queues thing
@@ -8902,11 +8902,14 @@ static u32 ath10k_wmi_prepare_peer_qos(u8 uapsd_queues, u8 sp)
cmd->rate_control = cpu_to_le32(arg->rate_ctrl);
cmd->retry_count = cpu_to_le32(arg->retry_count);
cmd->rcode_flags = cpu_to_le32(arg->rcode_flags);
+ cmd->ext_tid_cfg_bitmap = cpu_to_le32(arg->ext_tid_cfg_bitmap);
+ cmd->rtscts_ctrl = cpu_to_le32(arg->rtscts_ctrl);
ath10k_dbg(ar, ATH10K_DBG_WMI,
- "wmi noack tid %d vdev id %d ack_policy %d aggr %u rate_ctrl %u rcflag %u retry_count %d mac_addr %pM\n",
- arg->tid, arg->vdev_id, arg->ack_policy, arg->aggr_control, arg->rate_ctrl,
- arg->rcode_flags, arg->retry_count, arg->peer_macaddr.addr);
+ "wmi noack tid %d vdev id %d ack_policy %d aggr %u rate_ctrl %u rcflag %u retry_count %d rtscts %d ext_tid_cfg_bitmap %d mac_addr %pM\n",
+ arg->tid, arg->vdev_id, arg->ack_policy, arg->aggr_control,
+ arg->rate_ctrl, arg->rcode_flags, arg->retry_count, arg->rtscts_ctrl,
+ arg->ext_tid_cfg_bitmap, arg->peer_macaddr.addr);
return skb;
}
@@ -201,6 +201,7 @@ enum wmi_service {
WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
WMI_SERVICE_REPORT_AIRTIME,
WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
+ WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
/* Remember to add the new value to wmi_service_name()! */
@@ -493,6 +494,7 @@ static inline char *wmi_service_name(enum wmi_service service_id)
SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
+ SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT);
case WMI_SERVICE_MAX:
return NULL;
@@ -822,6 +824,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
WMI_SERVICE_REPORT_AIRTIME, len);
SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
+ SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
+ WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, len);
}
#undef SVCMAP
@@ -7188,6 +7192,16 @@ enum wmi_tid_rate_ctrl_conf {
WMI_TID_CONFIG_RATE_CONTROL_AUTO,
WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
+ WMI_PEER_TID_CONFIG_RATE_UPPER_CAP,
+};
+
+enum wmi_tid_rtscts_control_conf {
+ WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE,
+ WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE,
+};
+
+enum wmi_ext_tid_config_map {
+ WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0),
};
struct wmi_per_peer_per_tid_cfg_arg {
@@ -7199,6 +7213,8 @@ struct wmi_per_peer_per_tid_cfg_arg {
u8 rate_ctrl;
u32 retry_count;
u32 rcode_flags;
+ u32 ext_tid_cfg_bitmap;
+ u32 rtscts_ctrl;
};
struct wmi_peer_per_tid_cfg_cmd {
@@ -7214,6 +7230,10 @@ struct wmi_peer_per_tid_cfg_cmd {
__le32 rate_control;
__le32 rcode_flags;
__le32 retry_count;
+ /* See enum wmi_ext_tid_config_map */
+ __le32 ext_tid_cfg_bitmap;
+ /* see enum wmi_tid_rtscts_control_conf */
+ __le32 rtscts_ctrl;
} __packed;
enum wmi_txbf_conf {
This patch extend TID configuration support to configure RTS_CTS control and TX rate limit. Tx rate limit is similar to auto rate but it will be limited to the user configured rate mask rather than the station's highest supported rate mask. Here ext_tid_cfg_bitmap added to notify the target which extended configuration parameter has modified(here RTS_CTS). WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT service flag introduced to advertise this support. Testing: * Tested HW: QCA9984 * Tested FW: 10.4-3.9.0.2-00021 Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> --- drivers/net/wireless/ath/ath10k/core.c | 4 +++ drivers/net/wireless/ath/ath10k/mac.c | 48 ++++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.c | 9 ++++-- drivers/net/wireless/ath/ath10k/wmi.h | 20 +++++++++++++ 4 files changed, 78 insertions(+), 3 deletions(-)